For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Märkdata IECEx/ATEX
Certifikat nr. (ATEX)
DEMKO03ATEX136028U
Certifikat nr. (IECEX)
IECEXULD13.0005U
Ledararea max. (ATEX)
6 mm²
Ledararea max. (IECEX)
6 mm²
Temperaturområde för användning
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Märkning EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU märkning
II 2 G D
Säkerhetsanvisning
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Allmänt
Monteringsanvisning
Strömskena, Direktmontage
Klämbara ledare (Märkanslutning)
Anslutningstyp
Klämbygel
Avisoleringslängd
19 mm
Klämskruv
M 4
Ledararea, entrådig, max.
10 mm²
Ledararea, entrådig, min.
1 mm²
Ledararea, fintrådig, min.
1,5 mm²
Ledardiameter, fintrådig, max.
10 mm²
Åtdragningsmoment, min.
1,2 Nm
Märkdata enligt CSA
Certifikat nr. (CSA)
12400-237
Ledararea max. (CSA)
8 AWG
Ledararea min. (CSA)
22 AWG
Märkdata enligt UL
Certifikat nr. (UR)
E60693
Ledarstorlek Factory wiring max (UR)
12 AWG
Ledarstorlek Factory wiring min (UR)
20 AWG
Ledarstorlek Field wiring max (UR)
12 AWG
Ledarstorlek Field wiring min (UR)
20 AWG
Materialdata
Material
Stål
Färgkod
Silver
Systemparametrar
Utförande
för strömskena 10 x 3 mm, för strömskena 10 x 5 mm
ytterligare tekniska data
Monteringsanvisning
Strömskena, Direktmontage
Monteringstyp
skruvad
Nedladdningar
Godkännande/Certifikat/Dokument om överensstämmelse
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Märkning EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU märkning
II 2 G D
Säkerhetsanvisning
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
',1,'50.0',1,'04595000009999.jpg',false,0);)
',1,'50.0',1,'12613000009999.jpg',false,0);){kind=link}
',1,'50.0',1,'03166000009999.jpg',false,0);){kind=link}
',1,'50.0',1,'05568000009999.jpg',false,0);){kind=link}
',1,'20.0',1,'02665000009999.jpg',false,0);){kind=link}
',1,'50.0',1,'03165000009999.jpg',false,0);){kind=link}
',1,'50.0',1,'05567000009999.jpg',false,0);){kind=link}