Monitoring component for AC currents up to 10A with 4...20 mA loop feed and electrical isolation Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches. Power is fed to the component via the 4...20 mA current loop on the output side. The input and output circuits have 6 kV of electrical isolation.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 72/ 22.5/ 92.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20
Input 0...1 A / 0...5 A / 0...10 A AC switchable 50 / 60 Hz Voltage of measuring circuit 250 V AC Output 4...20 mA current loop Load resistance < 600 Ohm Strom >1 kOhm / voltage Transmission error < 0,5% v. E. Temperature coefficient 200 ppm / K Step response time typ. 700 ms Auxiliary power via output-side current loop Ambient temperature range 0 °C...+50 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kV input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WAZ1 CMA LP 1/5/10A ac
Short specification
Monitoring component for AC currents up to 10A with 4...20 mA loop feed and electrical isolation Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches. Power is fed to the component via the 4...20 mA current loop on the output side. The input and output circuits have 6 kV of electrical isolation.
Monitoring component for AC currents up to 10A with 4...20 mA loop feed and electrical isolation Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches. Power is fed to the component via the 4...20 mA current loop on the output side. The input and output circuits have 6 kV of electrical isolation.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 72/ 22.5/ 92.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20
Input 0...1 A / 0...5 A / 0...10 A AC switchable 50 / 60 Hz Voltage of measuring circuit 250 V AC Output 4...20 mA current loop Load resistance < 600 Ohm Strom >1 kOhm / voltage Transmission error < 0,5% v. E. Temperature coefficient 200 ppm / K Step response time typ. 700 ms Auxiliary power via output-side current loop Ambient temperature range 0 °C...+50 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kV input against output Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WAZ1 CMA LP 1/5/10A ac
Short specification
Monitoring component for AC currents up to 10A with 4...20 mA loop feed and electrical isolation Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches. Power is fed to the component via the 4...20 mA current loop on the output side. The input and output circuits have 6 kV of electrical isolation.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
',1,'1.0',1,'852865000043.jpg',false,0);)
;){kind=link}
',1,'1.0',1,'852865000043.jpg',false,0);){kind=link}
',1,'1.0',1,'852865000043.jpg',false,0);){kind=link}