Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components:
Circuit board with standard connectors and inserts with clamping-yoke connection.
Flange housing and holder/pull-out mechanism for the circuit card.
Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases:
For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19" rack.
When there are only a few cards to install and connect.
The circuit board is located in a remote position where the cabling cannot be easily handled.
An older system needs to be updated with additional electronics modules.
For test devices, production processes and laboratories: where circuit boards needs to be swapped out quickly and connections must be easy to handle.
Products:
Order No.:
0648661001
Type:
SKH 31 LP 250VAC RH1
Version:
Interface, Plug-in connector, acc. to DIN 41617 female
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
 LP RH2','Interface, Plug-in connector, acc. to DIN 41612 female, 32F',1,'1.0',1,'05869610019999.jpg',false,0);){kind=link}
 LP RH2','Interface, Plug-in connector, acc. to DIN 41612 female, 32F',1,'1.0',1,'05868610019999.jpg',false,0);){kind=link}
;){kind=link}
;){kind=link}