SIEMENS S7 300 | Weidmüller Product Catalogue

SIEMENS S7 300

The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components:

Manufacturer’s PLC connector.
Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm².
Flat cable connector, SUB-D or RSV, for connection to the interface.

The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

Product group overview

	Pre-assembled ribbon cable	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

	SUBD analogue	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

	RSV digital	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

	SIEMENS cable to top	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

	Mix of digital and analogue cables	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

	Cable for SITOP	The pre-assembled PAC cables establish an electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following components: Manufacturer’s PLC connector. Multi-pole LIYY or LY YCY cable (shielded) with a cross-section of 0.14 mm² or 0.25 mm². Flat cable connector, SUB-D or RSV, for connection to the interface. The cables are tested automatically for their continuity and insulation to guarantee the functionality for which they have been designed.

Pre-assembled ribbon cable:

SUBD analogue:

RSV digital:

SIEMENS cable to top:

Mix of digital and analogue cables:

Cable for SITOP: