Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
SPDs for energy systems
SPDs for instrumentation and control (I&C)
SPDs for data interfaces
Accessories
pluggable VSPC series
non-pluggable VSSC series in terminal design
non-pluggable MCZovp series with tension-clamp connection
Cable Gland VCG series
Pluggable arresters for VSPC
Base elements for VSPC
Supply and alert unit for VSPC R arresters
Accessories for the VSPC series
General ordering data
Version
Surge protection for instrumentation and control, with warning function / function indicator
Order No.
8972270000
Type
VSPC CONTROL UNIT 24VDC
GTIN (EAN)
4032248793488
Qty.
1 pc(s).
Dimensions and weights
Depth
71.5 mm
Depth (inches)
2.815 inch
Height
102 mm
Height (inches)
4.016 inch
Width
18 mm
Width (inches)
0.709 inch
Net weight
73.57 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5...96 %
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
71e97bb7-979f-4330-94c0-20c629bb05e3
CSA protection data
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input current, max. II
50 mA
Input voltage, max. Ui
31 V
Internal capacity, max. CI
100 µF
Internal inductance, max. LI
300 µH
General data
Colour
orange
Design
Installation housing
Protection degree
IP20
Rail
TS 35, TS 35 x 7.5
Segment
Measurement - Monitoring - Setting
Start-up time after fault correction
60 s
Version
with warning function / function indicator
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
III
Rated data IEC / EN
Max. continuous voltage, Uc (DC)
30 V
Number of poles
1
Operating current, Imax.
50 mA
Operating voltage
24 V
Rated current IN
50 mA
Rated voltage (DC)
24 V
Signalling contact
No
Standards
DIN EN 50178
Start-up time after fault correction
60 s
Diagnosis
Operating status
LED green
Status indication
Green LED
Wire break detection
Red/green LED, flashing
alarm output
Switching current
1 A
Switching voltage
250 V AC
Type
1 CO contact
Connection data
Stripping length
5.5 mm
Type of connection
Pluggable screw connection
Stripping length, rated connection
5 mm
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.5 Nm
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection cross-section, stranded, max.
1.5 mm²
Classifications
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
Tender specification sheets
Long specification
Evaluating unit for up to 10 VSPC R protected plugs. With voltage-free signalling contact and power supply. This can be wired with up to 10 base modules with optional remote monitoring and delivers the supply voltage. In case of protection module failure the voltage free signalling contact is triggered.
Short specification
Evaluating unit for up to 10 VSPC BASE R protected plugs. With voltage-free signalling contact and power supply.
There are no products in this group.
Version
Surge protection for instrumentation and control, with warning function / function indicator
Order No.
8972270000
Type
VSPC CONTROL UNIT 24VDC
GTIN (EAN)
4032248793488
Qty.
1 pc(s).
Depth
71.5 mm
Depth (inches)
2.815 inch
Height
102 mm
Height (inches)
4.016 inch
Width
18 mm
Width (inches)
0.709 inch
Net weight
73.57 g
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5...96 %
REACH SVHC
Lead 7439-92-1
SCIP
71e97bb7-979f-4330-94c0-20c629bb05e3
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input current, max. II
50 mA
Input voltage, max. Ui
31 V
Internal capacity, max. CI
100 µF
Internal inductance, max. LI
300 µH
Colour
orange
Design
Installation housing
Protection degree
IP20
Rail
TS 35, TS 35 x 7.5
Segment
Measurement - Monitoring - Setting
Start-up time after fault correction
60 s
Version
with warning function / function indicator
Pollution severity
2
Surge voltage category
III
Max. continuous voltage, Uc (DC)
30 V
Number of poles
1
Operating current, Imax.
50 mA
Operating voltage
24 V
Rated current IN
50 mA
Rated voltage (DC)
24 V
Signalling contact
No
Standards
DIN EN 50178
Start-up time after fault correction
60 s
Operating status
LED green
Status indication
Green LED
Wire break detection
Red/green LED, flashing
Switching current
1 A
Switching voltage
250 V AC
Type
1 CO contact
Stripping length
5.5 mm
Type of connection
Pluggable screw connection
Stripping length, rated connection
5 mm
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.5 Nm
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection cross-section, stranded, max.
1.5 mm²
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
Long specification
Evaluating unit for up to 10 VSPC R protected plugs. With voltage-free signalling contact and power supply. This can be wired with up to 10 base modules with optional remote monitoring and delivers the supply voltage. In case of protection module failure the voltage free signalling contact is triggered.
Short specification
Evaluating unit for up to 10 VSPC BASE R protected plugs. With voltage-free signalling contact and power supply.
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UL)
E311081
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
