Limit-value monitoring component for 1- /3- phase AC and DC voltages with relay output and electrical isolation limit-value monitoring component in 22.5 mm width for recording 1-phase AC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip alarm, monitored voltage window and switching behaviour (for working and quiescent currents) can be configured using DIP switches Switching threshold can be adjusted with front-side potentiometer Power is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 96.5/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20
Input 3 phases 80 V...250 V AC 1 phase 200...400 V AC/DC switchable Voltage of measuring circuit max 400 V Output Relay / CO Switching current 3 A Switching voltage 6... 250 V AC / 6...60 V DC Switching threshold via potentiometer Voltage window small 10 % AC / 20 % DC // large 12 % AC / 25 % DC adjustable Hysteresis 5 % AC / 6 % DC of input Temperature coefficient < 300 ppm K Step response time < 300 ms Ambient temperature range 0 °C...+50 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kVeff / 1 min. Input / Output Rated voltage 600 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WA5 VMR 3ph
Short specification
Limit-value monitoring component for 1- /3- phase AC and DC voltages with relay output and electrical isolation limit-value monitoring component in 22.5 mm width for recording 1-phase AC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip alarm, monitored voltage window and switching behaviour (for working and quiescent currents) can be configured using DIP switches Switching threshold can be adjusted with front-side potentiometer Power is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.
Limit-value monitoring component for 1- /3- phase AC and DC voltages with relay output and electrical isolation limit-value monitoring component in 22.5 mm width for recording 1-phase AC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip alarm, monitored voltage window and switching behaviour (for working and quiescent currents) can be configured using DIP switches Switching threshold can be adjusted with front-side potentiometer Power is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.
Add-on housing for TS35 rail mounting Dimensions: L/W/H 96.5/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20
Input 3 phases 80 V...250 V AC 1 phase 200...400 V AC/DC switchable Voltage of measuring circuit max 400 V Output Relay / CO Switching current 3 A Switching voltage 6... 250 V AC / 6...60 V DC Switching threshold via potentiometer Voltage window small 10 % AC / 20 % DC // large 12 % AC / 25 % DC adjustable Hysteresis 5 % AC / 6 % DC of input Temperature coefficient < 300 ppm K Step response time < 300 ms Ambient temperature range 0 °C...+50 °C
Secure isolation EN 50178, 2-way isolation up to 6 kV Test voltage 4 kVeff / 1 min. Input / Output Rated voltage 600 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WA5 VMR 3ph
Short specification
Limit-value monitoring component for 1- /3- phase AC and DC voltages with relay output and electrical isolation limit-value monitoring component in 22.5 mm width for recording 1-phase AC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip alarm, monitored voltage window and switching behaviour (for working and quiescent currents) can be configured using DIP switches Switching threshold can be adjusted with front-side potentiometer Power is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
, 250 V, Screw connection',1,'1.0',1,'87056300009999.jpg',false,0);)
;){kind=link}
;){kind=link}