8540340000 WAZ5 VVC 0-10V/0-10V | Weidmüller Product Catalogue

WAZ5 VVC 0-10V/0-10V Do not use product for new developmentsOnly remaining stock available

General ordering data
Version	Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Order No.	8540340000
Type	WAZ5 VVC 0-10V/0-10V
GTIN (EAN)	4032248180721
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2023-12-30
Alternative product	2456860000

Dimensions and weights
Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	124 g

Temperatures
Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure
SIL in compliance with IEC 61508	None
MTTF	463 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	94561991-a963-4084-a5f3-dfa3a5c2a27e

Input
Input resistance, voltage	typ. 100 kΩ
Input voltage	0...10 V
Number of inputs	1

Output
Cut-off frequency (-3 dB)	10 Hz
Load impedance current	≤ 600 Ω
Number of outputs	1
Output voltage, note	0...10 V
load impedance voltage	≥ 1 kΩ

Output (digital)
Max. switching voltage, AC	0 V
Rated switching current	0.1 A

General data
Accuracy	0.2 %
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	<1.3 W @ I_OUT = 5 mA
Rail	TS 35
Step response time	≤ 45 ms
Temperature coefficient	± 250 ppm/K
Voltage supply	24 V DC ± 25 %

Insulation coordination
EMC standards	EN 55011, EN 61000-6
Galvanic isolation	3-way isolator
Impulse withstand voltage	4 kV
Insulation voltage	2 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	2 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data
Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note
Product information	This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, to transmit and isolate analogue DC current signals from 0 to 10 V Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20 Input 0...10 V Output 0...10 V Transmission error < 0,2% v. E. Limit frequency 10 Hz Auxiliary power 24 VDC +/- 25 % Power loss approx. 1.3 W Ambient temperature range 0 °C...+55 °C Secure isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage 4 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus Type WAZ5 VVC 0-10/0-10V
Short specification	Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 0 to 10 V

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

Related products:

	Type of connection: Tension-clamp connection Order No.: 8447140000 Type: WAZ4 VVC DC 0-10/0-10V	Version: Signal converter/insulator, Input : 0-10 V, Output : 0-10 V Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

	Type of connection: Tension-clamp connection Order No.: 8445050000 Type: WAZ4 CVC DC 4-20/0-10V	Version: Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

	Type of connection: Tension-clamp connection Order No.: 8540300000 Type: WAZ5 VCC 0-10V/4-20MA	Version: Signal converter/insulator, Input : 0-10 V, Output : 4-20 mA Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

General ordering data

Version	Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Order No.	8540340000
Type	WAZ5 VVC 0-10V/0-10V
GTIN (EAN)	4032248180721
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2023-12-30
Alternative product	2456860000

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	124 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure

SIL in compliance with IEC 61508	None
MTTF	463 a

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	94561991-a963-4084-a5f3-dfa3a5c2a27e

Input

Input resistance, voltage	typ. 100 kΩ
Input voltage	0...10 V
Number of inputs	1

Output

Cut-off frequency (-3 dB)	10 Hz
Load impedance current	≤ 600 Ω
Number of outputs	1
Output voltage, note	0...10 V
load impedance voltage	≥ 1 kΩ

Output (digital)

Max. switching voltage, AC	0 V
Rated switching current	0.1 A

General data

Accuracy	0.2 %
Configuration	none
Galvanic isolation	3-way isolator
Power consumption	<1.3 W @ I_OUT = 5 mA
Rail	TS 35
Step response time	≤ 45 ms
Temperature coefficient	± 250 ppm/K
Voltage supply	24 V DC ± 25 %

Insulation coordination

EMC standards	EN 55011, EN 61000-6
Galvanic isolation	3-way isolator
Impulse withstand voltage	4 kV
Insulation voltage	2 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Insulation voltage input or output/supply	2 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Device description -- Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets

Long specification

Standard signal isolating converter
1-channel signal isolating converter in 17.5 mm width, with external power supply,
to transmit and isolate analogue DC current signals from 0 to 10 V

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20

Input                        0...10 V
Output                                             0...10 V
Transmission error             < 0,2% v. E.
Limit frequency 10 Hz
Auxiliary power                                     24 VDC +/- 25 %
Power loss approx. 1.3 W
Ambient
temperature range 0 °C...+55 °C

Secure isolation                   EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other
Test voltage                               4 kV input against output against auxiliary power
Rated
voltage                                         300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus

Type WAZ5 VVC 0-10/0-10V

Short specification

Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 0 to 10 V

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

Related products

	Type of connection: Tension-clamp connection Order No.: 8447140000 Type: WAZ4 VVC DC 0-10/0-10V	Version: Signal converter/insulator, Input : 0-10 V, Output : 0-10 V Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

	Type of connection: Tension-clamp connection Order No.: 8445050000 Type: WAZ4 CVC DC 4-20/0-10V	Version: Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

	Type of connection: Tension-clamp connection Order No.: 8540300000 Type: WAZ5 VCC 0-10V/4-20MA	Version: Signal converter/insulator, Input : 0-10 V, Output : 4-20 mA Delivery status: This article will no longer be available in the future.
		PDF data sheet Add to Inquiry List

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view