Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Signal - & serial interface converter– WAVESERIES
Process monitoring displays
Analogue-digital / digital-analogue converter
Configuration software
Accessories
EPAK
General ordering data
Order No.
7760054248
Type
EPAK-VMR-3PH-PH
GTIN (EAN)
6944169733802
Qty.
1 pc(s).
Dimensions and weights
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
Probability of failure
SIL in compliance with IEC 61508
None
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input
Input frequency
48Hz…63Hz
Input voltage
400V AC (L-L) ±15%
Output
Number of outputs
1
Output (digital)
Alarm function
Phase error, Phase sequence, as per factory setting
Max. switching frequency
20 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Number of digital outputs
1
Rated switching current
3 A
Type
Relay, 1 CO contact
General data
Configuration
none
Galvanic isolation
between input/output, yes, between input ⁄ output ⁄ supply
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
≤ 250 ppm/K of final value, ± 250 ppm/K, 350 ppm/K
Voltage supply
supplied from voltage measurement inputs
Insulation coordination
EMC standards
IEC 61000-6-2, IEC 61000-6-4, EN 61326
Galvanic isolation
between input/output, yes, between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2 kV input / output / power supply
Pollution severity
2
Rated voltage
300 V ACrms
Surge voltage category
III
Connection data
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
Classifications
ETIM 6.0
EC002654
ETIM 7.0
EC002654
ETIM 8.0
EC002654
ETIM 9.0
EC002654
ECLASS 9.0
27-21-01-22
ECLASS 9.1
27-21-01-22
ECLASS 10.0
27-21-01-22
ECLASS 11.0
27-21-01-22
ECLASS 12.0
27-21-01-22
ECLASS 13.0
27-21-01-22
Approvals
Approvals
ROHS
Conform
Order No.
7760054248
Type
EPAK-VMR-3PH-PH
GTIN (EAN)
6944169733802
Qty.
1 pc(s).
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
SIL in compliance with IEC 61508
None
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input frequency
48Hz…63Hz
Input voltage
400V AC (L-L) ±15%
Alarm function
Phase error, Phase sequence, as per factory setting
Max. switching frequency
20 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Number of digital outputs
1
Rated switching current
3 A
Type
Relay, 1 CO contact
Configuration
none
Galvanic isolation
between input/output, yes, between input ⁄ output ⁄ supply
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
≤ 250 ppm/K of final value, ± 250 ppm/K, 350 ppm/K
Voltage supply
supplied from voltage measurement inputs
EMC standards
IEC 61000-6-2, IEC 61000-6-4, EN 61326
Galvanic isolation
between input/output, yes, between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2 kV input / output / power supply
Pollution severity
2
Rated voltage
300 V ACrms
Surge voltage category
III
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
ETIM 6.0
EC002654
ETIM 7.0
EC002654
ETIM 8.0
EC002654
ETIM 9.0
EC002654
ECLASS 9.0
27-21-01-22
ECLASS 9.1
27-21-01-22
ECLASS 10.0
27-21-01-22
ECLASS 11.0
27-21-01-22
ECLASS 12.0
27-21-01-22
ECLASS 13.0
27-21-01-22
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
