Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
PLC Interfaces and Migration Solutions
Cord sets, Patchcords and Cables
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
Standard
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Pluggable terminal blocks
Modular terminal blocks with electronic components
terminal blocks with spring-loaded cable clamp
terminal blocks with miscellaneous connection
1-tier
2-tier
2.5 mm²
4 mm²
6 mm²
10 mm²
25 mm²
10x38 fuse
10x85 fuse
CC fuse
General ordering data
Version
Fuse terminal, Screw connection, 25 mm², 1500 V, 32 A, max. 6.0 W for 10x85, 14x85 gPV, dark beige
Order No.
2469360000
Type
WSI 25 10X85 1.5KV
GTIN (EAN)
4050118517965
Qty.
5 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2021-12-31
Alternative product
4000002613
Dimensions and weights
Depth
65 mm
Depth (inches)
2.559 inch
Height
130 mm
Height (inches)
5.118 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
0.01 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
125 °C
Material data
Material
PA
Colour
dark beige
UL 94 flammability rating
V-0
System specifications
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Wire connection cross section, finely stranded, two clampable wires, min.
0.75 mm²
Wire cross-section, finely stranded, two clampable wires, max.
10 mm²
Additional technical data
Explosion-tested version
No
Installation advice
TS 35
Open sides
closed
Snap-on
No
Type of fixing
Snap-on
Type of mounting
Snap-on
With snap-in pegs
No
Conductors for clamping (rated connection)
Blade size
Gr. PZ2
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
25 mm²
nominal
25 mm²
wire end ferrule
Stripping length
min.
11 mm
max.
11 mm
nominal
11 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.75 mm²
max.
16 mm²
nominal
16 mm²
wire end ferrule
Stripping length
min.
11 mm
max.
11 mm
nominal
11 mm
Tightening torque
Clamping range, max.
25 mm²
Clamping range, min.
0.75 mm²
Clamping screw
M 5
Connection cross-section, stranded, max.
25 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A7
Number of connections
2
Stripping length
11 mm
Tightening torque, max.
2.5 Nm
Tightening torque, min.
2 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 18
Wire connection cross section, finely stranded, max.
16 mm²
Wire connection cross section, finely stranded, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1.5 mm²
Fuse terminals
Cartridge fuse
max. 6.0 W for 10x85, 14x85 gPV
Display
Without LED
Fuse holder (cartridge holder)
pluggable
General
Installation advice
TS 35
Rail
TS 35
Standards
IEC 60269-6
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 18
Rating data
Rated cross-section
25 mm²
Rated voltage
1,500 V
Rated voltage to adjoining terminal
1,500 V
Rated AC voltage
1,000 V
Rated DC voltage
1,500 V
Rated current
32 A
Current at maximum wires
32 A
Standards
IEC 60269-6
Volume resistance according to IEC 60947-7-x
0.32 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
3.23 W
Pollution severity
3
Surge voltage category
III
UL rating data
Certificate No. (UL)
E355388
Important note
Product information
Impulse voltage up to 12kV tested.
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
There are no products in this group.
Version
Fuse terminal, Screw connection, 25 mm², 1500 V, 32 A, max. 6.0 W for 10x85, 14x85 gPV, dark beige
Order No.
2469360000
Type
WSI 25 10X85 1.5KV
GTIN (EAN)
4050118517965
Qty.
5 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2021-12-31
Alternative product
4000002613
Depth
65 mm
Depth (inches)
2.559 inch
Height
130 mm
Height (inches)
5.118 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
0.01 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
125 °C
Material
PA
Colour
dark beige
UL 94 flammability rating
V-0
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Wire connection cross section, finely stranded, two clampable wires, min.
0.75 mm²
Wire cross-section, finely stranded, two clampable wires, max.
10 mm²
Explosion-tested version
No
Installation advice
TS 35
Open sides
closed
Snap-on
No
Type of fixing
Snap-on
Type of mounting
Snap-on
With snap-in pegs
No
Blade size
Gr. PZ2
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
25 mm²
nominal
25 mm²
wire end ferrule
Stripping length
min.
11 mm
max.
11 mm
nominal
11 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.75 mm²
max.
16 mm²
nominal
16 mm²
wire end ferrule
Stripping length
min.
11 mm
max.
11 mm
nominal
11 mm
Tightening torque
Clamping range, max.
25 mm²
Clamping range, min.
0.75 mm²
Clamping screw
M 5
Connection cross-section, stranded, max.
25 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A7
Number of connections
2
Stripping length
11 mm
Tightening torque, max.
2.5 Nm
Tightening torque, min.
2 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 18
Wire connection cross section, finely stranded, max.
16 mm²
Wire connection cross section, finely stranded, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1.5 mm²
Cartridge fuse
max. 6.0 W for 10x85, 14x85 gPV
Display
Without LED
Fuse holder (cartridge holder)
pluggable
Installation advice
TS 35
Rail
TS 35
Standards
IEC 60269-6
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 18
Rated cross-section
25 mm²
Rated voltage
1,500 V
Rated voltage to adjoining terminal
1,500 V
Rated AC voltage
1,000 V
Rated DC voltage
1,500 V
Rated current
32 A
Current at maximum wires
32 A
Standards
IEC 60269-6
Volume resistance according to IEC 60947-7-x
0.32 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
3.23 W
Pollution severity
3
Surge voltage category
III
Certificate No. (UL)
E355388
Product information
Impulse voltage up to 12kV tested.
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UL)
E355388
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
