Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
SPDs for energy systems
SPDs for instrumentation and control (I&C)
SPDs for data interfaces
Accessories
AC voltage
Photovoltaics
DIN rail TS 35
40mm busbars
Type I
Type II
Type III
Typ I: 230/400V; 400/690V
Typ II Series; 230/400 V; 1000 V; Spare Arrester VPU II
Class I, LPL I,II,III,IV with remote alert
Class I, LPL I,II,III,IV without remote alert
Class I, LPL III,IV with remote alert
Class I, LPL III,IV without remote alert
LPL I,II,III,IV N-PE sparkover gap 260 V / 440 V
VPU I spare arrester
VPU I 280 V 25 kA
VPU I 280 V LCF 25 kA
VPU I 400 V 25 kA
General ordering data
Version
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C-S, TN-S
Order No.
2062960000
Type
VPU I 4 280V/25KA
GTIN (EAN)
4050118414615
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-03-31
Alternative product
2726780000
Dimensions and weights
Depth
69 mm
Depth (inches)
2.717 inch
Height
94 mm
Height (inches)
3.701 inch
Width
142.4 mm
Width (inches)
5.606 inch
Mounting dimension - height
75 mm
Net weight
1,150 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5 - 95% rel. humidity
General data
Colour
black, orange
Design
Installation housing; 8 TE, Insta IP 20
Operating altitude
≤ 2000 m
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Rail
TS 35
Segment
Power distribution
UL 94 flammability rating
V-0
Version
without telecomm. contact
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
IV
Rated data IEC / EN
Discharge current Imax (8/20µs) wire-PE
100 kA
Discharge current In (8/20µs) wire-PE
25 kA
Energy coordination (≤10 m)
Type I, Type II, Type III
Follow-on current extinguishing capability Ifi
Not available due for technical reasons
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
No Fuse neccessary ≤250 A gG, 250 A gL (if back up fuse > 250 A)
Leakage current at Un
100 µA
Lightning test current Iimp (10/350 µs) (L-PE)
25 kA
Low voltage network
TN-C-S, TN-S
Mains voltage
230 V / 400 V
Max. continuous voltage, Uc (AC)
280 V
Number of poles
4
Protection level Up at IN (L/N-PE)
≤ 1.4 kV
Rated load current IL
100 A
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type I, Type II
Requirements class, acc. to EN 61643-11
T1, T2
Response time
≤ 25 ns
Short-circuit current rating ISCCR
25 kA
Signalling contact
No
Standards
IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV
438 V
Voltage type
AC
Connection data
Stripping length
15 mm
Type of connection
Screw connection
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2.5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection cross-section, stranded, max.
50 mm²
Classifications
ETIM 6.0
EC000941
ETIM 7.0
EC000941
ETIM 8.0
EC000941
ETIM 9.0
EC000941
ECLASS 9.0
27-13-08-05
ECLASS 9.1
27-13-08-05
ECLASS 10.0
27-13-08-05
ECLASS 11.0
27-13-08-05
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
Approvals
Approvals
ROHS
Conform
Type of connection:
Screw connection
Order No.:
2063060000
Type:
VPU I 1+1 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TN, IT with N, IT without N, TT
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
2062940000
Type:
VPU I 3 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
2063080000
Type:
VPU I 3+1 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C-S, TN-S, IT without N, TT
Delivery status:
This article will no longer be available in the future.
Version
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C-S, TN-S
Order No.
2062960000
Type
VPU I 4 280V/25KA
GTIN (EAN)
4050118414615
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-03-31
Alternative product
2726780000
Depth
69 mm
Depth (inches)
2.717 inch
Height
94 mm
Height (inches)
3.701 inch
Width
142.4 mm
Width (inches)
5.606 inch
Mounting dimension - height
75 mm
Net weight
1,150 g
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5 - 95% rel. humidity
Colour
black, orange
Design
Installation housing; 8 TE, Insta IP 20
Operating altitude
≤ 2000 m
Optical function display
green = OK; red = arrester is defective - replace
Protection degree
IP20
Rail
TS 35
Segment
Power distribution
UL 94 flammability rating
V-0
Version
without telecomm. contact
Pollution severity
2
Surge voltage category
IV
Discharge current Imax (8/20µs) wire-PE
100 kA
Discharge current In (8/20µs) wire-PE
25 kA
Energy coordination (≤10 m)
Type I, Type II, Type III
Follow-on current extinguishing capability Ifi
Not available due for technical reasons
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
No Fuse neccessary ≤250 A gG, 250 A gL (if back up fuse > 250 A)
Leakage current at Un
100 µA
Lightning test current Iimp (10/350 µs) (L-PE)
25 kA
Low voltage network
TN-C-S, TN-S
Mains voltage
230 V / 400 V
Max. continuous voltage, Uc (AC)
280 V
Number of poles
4
Protection level Up at IN (L/N-PE)
≤ 1.4 kV
Rated load current IL
100 A
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type I, Type II
Requirements class, acc. to EN 61643-11
T1, T2
Response time
≤ 25 ns
Short-circuit current rating ISCCR
25 kA
Signalling contact
No
Standards
IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV
438 V
Voltage type
AC
Stripping length
15 mm
Type of connection
Screw connection
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2.5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection cross-section, stranded, max.
50 mm²
ETIM 6.0
EC000941
ETIM 7.0
EC000941
ETIM 8.0
EC000941
ETIM 9.0
EC000941
ECLASS 9.0
27-13-08-05
ECLASS 9.1
27-13-08-05
ECLASS 10.0
27-13-08-05
ECLASS 11.0
27-13-08-05
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
Approvals
ROHS
Conform
Type of connection:
Screw connection
Order No.:
2063060000
Type:
VPU I 1+1 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase, TN, IT with N, IT without N, TT
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
2062940000
Type:
VPU I 3 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
2063080000
Type:
VPU I 3+1 280V/25KA
Version:
Surge voltage arrester, Low voltage, without telecomm. contact, TN-C-S, TN-S, IT without N, TT
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}
;){kind=link}