Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
Assortment case / L-BOXX
Pre-assembled installation terminal rails
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Accessories
Installation terminal blocks
1-tier
multi-tier
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
35 mm²
General ordering data
Version
Multi level installation terminal block, Tension-clamp connection, 4 mm², 400 V, Number of connections: 2, Number of levels: 1, Green/yellow
Order No.
1808340000
Type
ZPE 4 S
GTIN (EAN)
4032248280575
Qty.
50 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-03-31
Alternative product
2668720000
Dimensions and weights
Depth
45.5 mm
Depth (inches)
1.791 inch
Depth including DIN rail
46 mm
Height
65.5 mm
Height (inches)
2.579 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
15.17 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50
Continuous operating temp., max.
120
Material data
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
System specifications
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
N-function
No
PE function
Yes
PEN function
No
Additional technical data
Explosion-tested version
No
Installation advice
Direct mounting
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
4 mm²
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.5 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tube length for twin wire-end ferrule
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Tube length for wire-end ferrule with plastic collar DIN 46228/4
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length for wire-end ferrule without plastic collar DIN 46228/1
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Type of connection
Tension-clamp connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-2
Rating data
Rated cross-section
4 mm²
Rated voltage
400 V
Rated voltage to adjoining terminal
400 V
Rated DC voltage
400 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
6 kV
Rated impulse withstand voltage to adjacent terminal
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Classifications
ETIM 6.0
EC001329
ETIM 7.0
EC001329
ETIM 8.0
EC001329
ETIM 9.0
EC001329
ECLASS 9.0
27-14-11-25
ECLASS 9.1
27-14-11-25
ECLASS 10.0
27-14-11-25
ECLASS 11.0
27-14-11-25
ECLASS 12.0
27-14-11-25
ECLASS 13.0
27-25-01-10
Order No.:
1808360000
Type:
ZDU 4 S
Version:
Z-series, Installation multi-tier terminal, Feed-through terminal, Rated cross-section: 4 mm², Tension-clamp connection, dark beige, Direct mounting
Delivery status:
This article will no longer be available in the future.
Order No.:
1757980000
Type:
ZDU 4/NT
Version:
Multi level installation terminal block, Tension-clamp connection, 4 mm², 250 V, 32 A, Number of connections: 1, Number of levels: 1, blue
Delivery status:
This article will no longer be available in the future.
Order No.:
1808310000
Type:
ZNT 4 S
Version:
Multi level installation terminal block, Tension-clamp connection, 4 mm², 250 V, 32 A, Number of connections: 1, Number of levels: 1, blue
Delivery status:
This article will no longer be available in the future.
Version
Multi level installation terminal block, Tension-clamp connection, 4 mm², 400 V, Number of connections: 2, Number of levels: 1, Green/yellow
Order No.
1808340000
Type
ZPE 4 S
GTIN (EAN)
4032248280575
Qty.
50 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-03-31
Alternative product
2668720000
Depth
45.5 mm
Depth (inches)
1.791 inch
Depth including DIN rail
46 mm
Height
65.5 mm
Height (inches)
2.579 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
15.17 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50
Continuous operating temp., max.
120
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
N-function
No
PE function
Yes
PEN function
No
Explosion-tested version
No
Installation advice
Direct mounting
Open sides
right
Type of mounting
Snap-on
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
4 mm²
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.5 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tube length for twin wire-end ferrule
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Tube length for wire-end ferrule with plastic collar DIN 46228/4
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length for wire-end ferrule without plastic collar DIN 46228/1
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Type of connection
Tension-clamp connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-2
Rated cross-section
4 mm²
Rated voltage
400 V
Rated voltage to adjoining terminal
400 V
Rated DC voltage
400 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
6 kV
Rated impulse withstand voltage to adjacent terminal
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
ETIM 6.0
EC001329
ETIM 7.0
EC001329
ETIM 8.0
EC001329
ETIM 9.0
EC001329
ECLASS 9.0
27-14-11-25
ECLASS 9.1
27-14-11-25
ECLASS 10.0
27-14-11-25
ECLASS 11.0
27-14-11-25
ECLASS 12.0
27-14-11-25
ECLASS 13.0
27-25-01-10
Order No.:
1808360000
Type:
ZDU 4 S
Version:
Z-series, Installation multi-tier terminal, Feed-through terminal, Rated cross-section: 4 mm², Tension-clamp connection, dark beige, Direct mounting
Delivery status:
This article will no longer be available in the future.
Order No.:
1757980000
Type:
ZDU 4/NT
Version:
Multi level installation terminal block, Tension-clamp connection, 4 mm², 250 V, 32 A, Number of connections: 1, Number of levels: 1, blue
Delivery status:
This article will no longer be available in the future.
Order No.:
1808310000
Type:
ZNT 4 S
Version:
Multi level installation terminal block, Tension-clamp connection, 4 mm², 250 V, 32 A, Number of connections: 1, Number of levels: 1, blue
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.