Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Isolating amplifier and measuring transducer
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Switched-mode power supply units
Electronic load monitoring
Communication modules
Uninterruptible power supply
DC/DC converter
Diode- and redundancy modules
Pre charge unit
Decentralised switched-mode power supply units IP65
Decentralised electronic load monitoring IP65
Accessories
UPS control unit
Battery module
Buffer module
General ordering data
Version
UPS control unit
Order No.
1370040010
Type
CP DC UPS 24V 40A
GTIN (EAN)
4050118202342
Qty.
1 pc(s).
Dimensions and weights
Depth
150 mm
Depth (inches)
5.905 inch
Height
130 mm
Height (inches)
5.118 inch
Width
66 mm
Width (inches)
2.598 inch
Net weight
1,051.8 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C
Humidity
5...95 %, no condensation
Environmental Product Compliance
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
d6c68c9e-3e33-4fa9-920e-331473bf0422
Battery module
Parallel connection option
yes, max. 2
Rated voltage
24 V
Storage medium
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Integrated battery charger
Battery availability test
every minute
Charging current
0.15 cA
Charging feature
IU characteristic curve
Charging voltage (temperature compensated)
27, 48 V @ 20°C
Temperature coefficient
- 48 mV / °C
Operating interfaces and control inputs
Function DIP switch
Inversion of transistor outputs, Operation without temperature probe
Remote disconnection (Interlock)
Yes
Selector switch battery
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service
Selector switch buffer times
0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0
Temperature probe
NTC 100 kΩ
Input
DC current consumption
max. 200 mA (without battery), max. 0.5 A (with fully charged battery)
DC input voltage range
20...30 V DC
Input current
≤ 43 A
Input fuse (internal)
Yes
Max. approved input current
52 A
Rated input voltage
24 V DC
Wire connection method
Screw connection
Output
Continuous output current @ UNominal
48 A @ 45 °C, 24 A @ 70 °C, 40 A @ 60 °C
Nominal output current for Unom
40 A @ 60 °C
Output current, max.
48 A
Output voltage, note
Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery supply (I max)
Overload protection
Yes
Parallel connection option
yes, max. 2, Yes, with diode module
Protection against inverse voltage
Yes
Rated output voltage
24 V DC ± 1 %
Residual ripple, breaking spikes
< 50 mVPP @ 24 V DC, IN
Temperature coefficient
- 48 mV / °C
Temperature probe
NTC 100 kΩ
Wire connection method
Screw connection
General data
Buffer times
Depending on the connected battery
Clip-in foot
metal
Current limiting
> 120% IN
Degree of efficiency
≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode
Housing version
Metal, corrosion resistant
Humidity
5...95 %, no condensation
MTBF
According to Standard
SN 29500
Operating time (hours), min.
1,860,000 h
Ambient temperature
25 °C
Input voltage
24 V
Output power
960 W
Duty cycle
100 %
According to Standard
SN 29500
Operating time (hours), min.
906,400 h
Ambient temperature
40 °C
Input voltage
24 V
Output power
960 W
Duty cycle
100 %
Mounting position, installation notice
Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Power loss
< 10 W
Protection against reverse voltages from the load
32…34 V DC
Protection degree
IP20
Short-circuit protection
Yes
Storage medium
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Surge voltage category
III
EMC / shock / vibration
Interference immunity test acc. to
EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)
Noise emission in accordance with EN55032
Class B
Shock resistance IEC 60068-2-27
30 g in all directions
Vibration resistance IEC 60068-2-6
2.3 g
Insulation coordination
Insulation voltage
1 kV DC
Pollution severity
2
Protection class
III, with no ground connection, for SELV
Surge voltage category
III
electrical isolation, input-earth
1 kV
electrical isolation, output-earth
1 kV
Electrical safety (applied standards)
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment
Acc. to EN50178 / VDE0160
Protection against dangerous shock currents
Acc. to VDE0106-101
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410
Safety transformers for switch-mode power supplies
According to EN 61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max.
6
Conductor cross-section, AWG/kcmil , min.
26
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
16 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Reverse polarity protection
Yes
Tightening torque, max.
1.5 Nm
Tightening torque, min.
1.2 Nm
Wire connection cross section, flexible (input), max.
16 mm²
Connection data (output)
Conductor cross-section, AWG/kcmil , max.
6
Conductor cross-section, AWG/kcmil , min.
26
Conductor cross-section, flexible , max.
16 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
16 mm²
Conductor cross-section, rigid , min.
0.6 mm²
Reverse polarity protection
Yes
Tightening torque, max.
1.5 Nm
Tightening torque, min.
1.2 Nm
Connection data (signal)
Wire connection cross-section, flexible (signal), max.
1.5 mm²
Wire connection cross-section, flexible (signal), min.
0.2 mm²
Wire connection method
Screw connection
Wire cross-section, AWG/kcmil , max.
15
Wire cross-section, AWG/kcmil , min.
30
Wire cross-section, solid , max.
1.5 mm²
Wire cross-section, solid , min.
0.2 mm²
Signalling
Floating contact
Yes
Status indicator
Three-colour LED: Battery capacity >85% green, >40% yellow, >20% red, <20% red (Flashing), Green/yellow LED: normal / buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red LED: switch-off / battery fault
Status relay (max. load)
Fault (alarm) (30 V AC/DC 0.1 A), Battery operation (buff.) (30 V AC/DC 0.1 A), Laden (Charg.) (30V AC/DC 0,1A)
Transistor outputs (24&...27 V DC max. load 150 mA)
Battery operation (buff.), Charging, Fault (alarm)
Classifications
ETIM 6.0
EC002850
ETIM 7.0
EC002850
ETIM 8.0
EC002850
ETIM 9.0
EC002850
ECLASS 9.0
27-04-06-92
ECLASS 9.1
27-04-92-01
ECLASS 10.0
27-04-06-92
ECLASS 11.0
27-04-06-92
ECLASS 12.0
27-04-06-92
ECLASS 13.0
27-04-06-92
ECLASS 14.0
27-04-06-92
Order No.:
1370050010
Type:
CP DC UPS 24V 20A/10A
Version:
UPS control unit
Version
UPS control unit
Order No.
1370040010
Type
CP DC UPS 24V 40A
GTIN (EAN)
4050118202342
Qty.
1 pc(s).
Depth
150 mm
Depth (inches)
5.905 inch
Height
130 mm
Height (inches)
5.118 inch
Width
66 mm
Width (inches)
2.598 inch
Net weight
1,051.8 g
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C
Humidity
5...95 %, no condensation
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
d6c68c9e-3e33-4fa9-920e-331473bf0422
Parallel connection option
yes, max. 2
Rated voltage
24 V
Storage medium
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Battery availability test
every minute
Charging current
0.15 cA
Charging feature
IU characteristic curve
Charging voltage (temperature compensated)
27, 48 V @ 20°C
Temperature coefficient
- 48 mV / °C
Function DIP switch
Inversion of transistor outputs, Operation without temperature probe
Remote disconnection (Interlock)
Yes
Selector switch battery
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service
Selector switch buffer times
0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0
Temperature probe
NTC 100 kΩ
DC current consumption
max. 200 mA (without battery), max. 0.5 A (with fully charged battery)
DC input voltage range
20...30 V DC
Input current
≤ 43 A
Input fuse (internal)
Yes
Max. approved input current
52 A
Rated input voltage
24 V DC
Wire connection method
Screw connection
Continuous output current @ UNominal
48 A @ 45 °C, 24 A @ 70 °C, 40 A @ 60 °C
Nominal output current for Unom
40 A @ 60 °C
Output current, max.
48 A
Output voltage, note
Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery supply (I max)
Overload protection
Yes
Parallel connection option
yes, max. 2, Yes, with diode module
Protection against inverse voltage
Yes
Rated output voltage
24 V DC ± 1 %
Residual ripple, breaking spikes
< 50 mVPP @ 24 V DC, IN
Temperature coefficient
- 48 mV / °C
Temperature probe
NTC 100 kΩ
Wire connection method
Screw connection
Buffer times
Depending on the connected battery
Clip-in foot
metal
Current limiting
> 120% IN
Degree of efficiency
≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode
Housing version
Metal, corrosion resistant
Humidity
5...95 %, no condensation
MTBF
According to Standard
SN 29500
Operating time (hours), min.
1,860,000 h
Ambient temperature
25 °C
Input voltage
24 V
Output power
960 W
Duty cycle
100 %
According to Standard
SN 29500
Operating time (hours), min.
906,400 h
Ambient temperature
40 °C
Input voltage
24 V
Output power
960 W
Duty cycle
100 %
Mounting position, installation notice
Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Power loss
< 10 W
Protection against reverse voltages from the load
32…34 V DC
Protection degree
IP20
Short-circuit protection
Yes
Storage medium
3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Surge voltage category
III
Interference immunity test acc. to
EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)
Noise emission in accordance with EN55032
Class B
Shock resistance IEC 60068-2-27
30 g in all directions
Vibration resistance IEC 60068-2-6
2.3 g
Insulation voltage
1 kV DC
Pollution severity
2
Protection class
III, with no ground connection, for SELV
Surge voltage category
III
electrical isolation, input-earth
1 kV
electrical isolation, output-earth
1 kV
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment
Acc. to EN50178 / VDE0160
Protection against dangerous shock currents
Acc. to VDE0106-101
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410
Safety transformers for switch-mode power supplies
According to EN 61558-2-16
Conductor cross-section, AWG/kcmil , max.
6
Conductor cross-section, AWG/kcmil , min.
26
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
16 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Reverse polarity protection
Yes
Tightening torque, max.
1.5 Nm
Tightening torque, min.
1.2 Nm
Wire connection cross section, flexible (input), max.
16 mm²
Conductor cross-section, AWG/kcmil , max.
6
Conductor cross-section, AWG/kcmil , min.
26
Conductor cross-section, flexible , max.
16 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
16 mm²
Conductor cross-section, rigid , min.
0.6 mm²
Reverse polarity protection
Yes
Tightening torque, max.
1.5 Nm
Tightening torque, min.
1.2 Nm
Wire connection cross-section, flexible (signal), max.
1.5 mm²
Wire connection cross-section, flexible (signal), min.
0.2 mm²
Wire connection method
Screw connection
Wire cross-section, AWG/kcmil , max.
15
Wire cross-section, AWG/kcmil , min.
30
Wire cross-section, solid , max.
1.5 mm²
Wire cross-section, solid , min.
0.2 mm²
Floating contact
Yes
Status indicator
Three-colour LED: Battery capacity >85% green, >40% yellow, >20% red, <20% red (Flashing), Green/yellow LED: normal / buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red LED: switch-off / battery fault
Status relay (max. load)
Fault (alarm) (30 V AC/DC 0.1 A), Battery operation (buff.) (30 V AC/DC 0.1 A), Laden (Charg.) (30V AC/DC 0,1A)
Transistor outputs (24&...27 V DC max. load 150 mA)
Battery operation (buff.), Charging, Fault (alarm)
ETIM 6.0
EC002850
ETIM 7.0
EC002850
ETIM 8.0
EC002850
ETIM 9.0
EC002850
ECLASS 9.0
27-04-06-92
ECLASS 9.1
27-04-92-01
ECLASS 10.0
27-04-06-92
ECLASS 11.0
27-04-06-92
ECLASS 12.0
27-04-06-92
ECLASS 13.0
27-04-06-92
ECLASS 14.0
27-04-06-92
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E258476
Order No.:
1370050010
Type:
CP DC UPS 24V 20A/10A
Version:
UPS control unit
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.