1351700000 VPU III SO LD+A | Weidmüller Product Catalogue

VPU III SO LD+A

General ordering data
Version	Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
Order No.	1351700000
Type	VPU III SO LD+A
GTIN (EAN)	4050118158458
Qty.	1 pc(s).

Dimensions and weights
Depth	25 mm
Depth (inches)	0.984 inch
Height	35 mm
Height (inches)	1.378 inch
Width	12 mm
Width (inches)	0.472 inch
Net weight	34 g

Temperatures
Storage temperature	-40 °C...80 °C
Operating temperature	-25 °C...55 °C
Humidity	5 - 95% rel. humidity

Connection data, remote alert
Connection type	Miscellaneous
Cross-section for connected wire, solid core, max.	1.5 mm²

General data
Acoustic signal	Yes
Colour	black
Design	Flush mounting
Optical function display	Green LED = OK, Red LED = arrester is defective, replace
Protection degree	IP20
Segment	Power distribution
UL 94 flammability rating	V-0
Version	without telecomm. contact

Insulation coordination acc. to EN 50178
Pollution severity	2
Surge voltage category	II

Rated data IEC / EN
Acoustic signal	Yes
Combined pulse U_OC	3 kV
Energy coordination (≤10 m)	Type II, Type III
Fuse	16 A
Leakage current at U_n	30 µA
Low voltage network	Single-phase
Mains frequency at 250 Vmax	50...60Hz
Max. continuous voltage, Uc (AC)	275 V
Number of poles	1
PE conductor current I_PE	10 µA
Protection level U_p at I_N (L/N-PE)	≤ 1.5 kV
Rated voltage (AC)	230 V
Requirements category acc. to IEC 61643-11	Type III
Requirements class, acc. to EN 61643-11	T3
Response time	< 100μs
Short-circuit current rating I_SCCR	1.5 kA
Signalling contact	No
Standards	IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV	440 V
Voltage type	AC

Connection data
Wire connection cross section, finely stranded, max.	1 mm²

Guarantee
Time interval	5 years

Downloads
Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Tender specification sheets
Long specification	Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III SO LD +A is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the red LED goes out and an acoustic signal sounds. Rated voltage: 230 VAC In/max (8/20 µs): 1.5 kA protection level < 1.5 kV Type: Weidmüller VPU III R SO LD A Order No. 1351700000 or equivalent
Short specification	Class III arrester with Uoc: 3 kV suitable for 230 V AC mains systems. Protection level < 1.5 kV. With red LED display and acoustic alert Type: Weidmüller VPU III SO LD A Order no. 1351700000 or equivalent

Approvals
Approvals
ROHS	Conform

Related products:

	Order No.: 1351680000 Type: VPU III SO LD	Version: Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
		PDF data sheet Add to Inquiry List

General ordering data

Version	Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
Order No.	1351700000
Type	VPU III SO LD+A
GTIN (EAN)	4050118158458
Qty.	1 pc(s).

Dimensions and weights

Depth	25 mm
Depth (inches)	0.984 inch
Height	35 mm
Height (inches)	1.378 inch
Width	12 mm
Width (inches)	0.472 inch
Net weight	34 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-25 °C...55 °C
Humidity	5 - 95% rel. humidity

Connection data, remote alert

Connection type	Miscellaneous
Cross-section for connected wire, solid core, max.	1.5 mm²

General data

Acoustic signal	Yes
Colour	black
Design	Flush mounting
Optical function display	Green LED = OK, Red LED = arrester is defective, replace
Protection degree	IP20
Segment	Power distribution
UL 94 flammability rating	V-0
Version	without telecomm. contact

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	II

Rated data IEC / EN

Acoustic signal	Yes
Combined pulse U_OC	3 kV
Energy coordination (≤10 m)	Type II, Type III
Fuse	16 A
Leakage current at U_n	30 µA
Low voltage network	Single-phase
Mains frequency at 250 Vmax	50...60Hz
Max. continuous voltage, Uc (AC)	275 V
Number of poles	1
PE conductor current I_PE	10 µA
Protection level U_p at I_N (L/N-PE)	≤ 1.5 kV
Rated voltage (AC)	230 V
Requirements category acc. to IEC 61643-11	Type III
Requirements class, acc. to EN 61643-11	T3
Response time	< 100μs
Short-circuit current rating I_SCCR	1.5 kA
Signalling contact	No
Standards	IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV	440 V
Voltage type	AC

Connection data

Wire connection cross section, finely stranded, max.

1 mm²

Downloads

Approval/Certificate/Document of Conformity	EU_Konformitätserklärung / EU_Declaration_of_Conformity
Eplan Data Portal	Eplan data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90

Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III SO LD +A is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the red LED goes out and an acoustic signal sounds. Rated voltage: 230 VAC In/max (8/20 µs): 1.5 kA protection level < 1.5 kV Type: Weidmüller VPU III R SO LD A Order No. 1351700000 or equivalent

Short specification

Class III arrester with Uoc: 3 kV suitable for 230 V AC mains systems. Protection level < 1.5 kV. With red LED display and acoustic alert Type: Weidmüller VPU III SO LD A Order no. 1351700000 or equivalent

Approvals

Approvals
ROHS	Conform

Related products

	Order No.: 1351680000 Type: VPU III SO LD	Version: Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase
		PDF data sheet Add to Inquiry List

	Add to inquiry list / Ask about product
	PDF data sheet
	Related products
	Print view