Surge voltage arrester, Low voltage, Accessories, Spare arrester
Order No.
1351180000
Type
VPU II 0 N-PE 260V/40KA
GTIN (EAN)
4050118158854
Qty.
1 pc(s).
Dimensions and weights
Depth
64 mm
Depth (inches)
2.52 inch
Height
52 mm
Height (inches)
2.047 inch
Width
17.8 mm
Width (inches)
0.701 inch
Net weight
52 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70
Humidity
5 - 95% rel. humidity
General data
Colour
blue
Design
Installation housing; 1TE, Insta IP 20
Optical function display
No
Protection degree
IP20
Rail
TS 35
UL 94 flammability rating
V-0
Version
Spare arrester
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
III
Rated data IEC / EN
Combined pulse UOC
10 kV
Discharge current Imax (8/20µs) N-PE
40 kA
Discharge current In (8/20µs) N-PE
20 kA
Energy coordination (≤10 m)
Type II, Type III
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse
Not required
Leakage current at Un
1 µA
Max. continuous voltage, Uc (N-PE)
260 V
Number of poles
1
Protection level Up at IN (N-PE)
≤ 1.5 kV
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II, Type III
Requirements class, acc. to EN 61643-11
T2, T3
Response time
≤ 100 ns
Short-circuit current rating ISCCR
100 kA
Standards
IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV
1,200 V
Voltage type
AC
Connection data
Type of connection
pluggable
Important note
Product information
Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018).
Spare arrestor consisting of V0 material for surge voltage arrestor VPU II N-PE 440 V series.
The pluggable high-performance varistors can be exchanged by trained personnel following a failure.
Rated voltage: 440 V
Type: Weidmüller VPU II 0 N-PE 440 V/40 kA
Order No.: 1351180000
Short specification
Spare arrester for surge voltage arrester VPU II N-PE 440 V series
The pluggable high-performance varistors can be swapped by trained personnel following a failure.
Rated voltage: 440 V
Type: Weidmüller VPU II 0 N-PE 440 V/40 kA
Order no.: 1351180000
Approvals
Approvals
ROHS
Conform
Related products:
Type of connection:
pluggable
Order No.:
1549700000
Type:
VPU II 0 1000V/40KA AC
Version:
Surge voltage arrester, Low voltage, Accessories, Spare arrester
Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018).
Spare arrestor consisting of V0 material for surge voltage arrestor VPU II N-PE 440 V series.
The pluggable high-performance varistors can be exchanged by trained personnel following a failure.
Rated voltage: 440 V
Type: Weidmüller VPU II 0 N-PE 440 V/40 kA
Order No.: 1351180000
Short specification
Spare arrester for surge voltage arrester VPU II N-PE 440 V series
The pluggable high-performance varistors can be swapped by trained personnel following a failure.
Rated voltage: 440 V
Type: Weidmüller VPU II 0 N-PE 440 V/40 kA
Order no.: 1351180000
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.