English
Deutsch
Français
Italiano
Español
Svenska
Россия
繁體中文
简体中文
Polska
한국어
Čeština
Magyar
www.weidmueller.com
  Product wizard 
0
0
Quick access
RS 30 24VDC LD LP 1R
         

Icon
Icon
Icon
Icon
Icon
 

General ordering data

Version RS-SERIES, Relay module, Number of contacts: 1, NC contact AgNi 0.15 gold flashed, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No
Order No. 1100911001
Type RS 30 24VDC LD LP 1R
GTIN (EAN) 4008190052881
Qty. 10 pc(s).

Dimensions and weights

Depth 56 mm
Depth (inches) 2.205 inch
Height 70 mm
Height (inches) 2.756 inch
Width 11.2 mm
Width (inches) 0.441 inch
Net weight 27.07 g

Temperatures

Storage temperature -40 °C...60 °C
Operating temperature -25 °C...40 °C
Humidity 40 °C / 93 % rel. humidity, no condensation

Environmental Product Compliance

REACH SVHC Lead 7439-92-1
SCIP 3820ceea-2b49-4a61-bda5-08f3867b3419

Control side

Rated control voltage 24 V DC ±10 %
Rated current DC 10 mA
Power rating 0.45 W
Pull-in/drop-out voltage, typ. 21.5 V DC
Pull-in/drop-out current, typ. 12 mA / 3 mA DC
Status indicator Green LED
Protective circuit Free-wheeling diode, Reverse polarity protection

Load side

Rated switching voltage 250 V AC
Continuous current 6 A
Max. switching frequency at rated load 0.1 Hz
Max. switching voltage, AC 250 V
Inrush current 8 A
AC switching capacity (resistive), max. 2000 VA
Switch-on delay ≤ 8 ms
Switch-off delay ≤ 7 ms
Contact type 1 NC contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil > 5x105 switching cycles
Mechanical service life 20 x 106 switching cycles
Min. switching power 250 mW

General data

Version soldered relay
Rail TS 32, TS 35
Test button available No
Mechanical switch position indicator No
Colour orange

Insulation coordination

Rated voltage 250 V
Pollution severity 2
Surge voltage category III
Creepage and clearance distance input – output > 3 mm
Impulse withstand voltage 4 kV
Protection degree IP20

Further details of approvals / standards

Certificate No. (CSA) 082859-C-000

Connection data

Wire connection method Screw connection
Stripping length, rated connection 8 mm
Clamping range, rated connection 2.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 4 mm²

Downloads

Approval/Certificate/Document of Conformity
Engineering Data EPLAN, WSCAD
Catalogues Catalogues in PDF-format

Classifications

ETIM 6.0 EC001437
ETIM 7.0 EC001437
ETIM 8.0 EC001437
ECLASS 9.0 27-37-16-01
ECLASS 9.1 27-37-16-01
ECLASS 10.0 27-37-16-01
ECLASS 11.0 27-37-16-01
ECLASS 12.0 27-37-16-01

Approvals

Approvals CE CSA EAC MARITREG
ROHS Conform

Related products

Follow us on:
Contact
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
 
+49 5231 14-0
+49 5231 14-292083
More information
Decentralised automation solutions
Energy Management Solutions
Industrial Analytics
Industrial IoT Solutions
More information
Mobility Concepts
Photovoltaics
Wind Solutions
Workplace Solutions
More information
Single Pair Ethernet
Weidmüller Configurator
Support & Service
Contact
Disposal Instructions
Engineering data
Repairs and replacement parts