Clamping yoke (bus-bar), Clamping yoke, silver, 16 mm², Width: 10 mm, M 4, Steel
Order No.
0316600000
Type
ZB 16 ZKSC
GTIN (EAN)
4008190145989
Qty.
50 pc(s).
Dimensions and weights
Depth
24 mm
Depth (inches)
0.945 inch
Height
16 mm
Height (inches)
0.63 inch
Width
10 mm
Width (inches)
0.394 inch
Net weight
7.485 g
Temperatures
Ambient temperature
-5 °C…40 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Steel
Colour
silver
Rating data IECEx/ATEX
Certificate No. (IECEX)
IECEXULD13.0005U
Wire cross section max. (IECEX)
16 mm²
Safety notice
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
, Clamping yoke, silver, 16 mm², Width: 10 mm, M 4, Steel',1,'50.0',1,'03166000009999.jpg',false,0);)
, Clamping yoke, silver, 10 mm², Width: 8 mm, M 4, Steel',1,'50.0',1,'12613000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 16 mm², Width: 10 mm, M 4, Steel',1,'50.0',1,'05568000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 35 mm², Width: 14 mm, M 6, Steel',1,'20.0',1,'02665000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 4 mm², Width: 5.3 mm, M 3, Steel',1,'50.0',1,'03165000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 4 mm², Width: 5.3 mm, M 3, Steel',1,'50.0',1,'05567000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 6 mm², Width: 8 mm, M 4, Steel',1,'50.0',1,'04595000009999.jpg',false,0);){kind=link}