Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
PLC Interfaces and Migration Solutions
Cord sets, Patchcords and Cables
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular test-disconnect terminal blocks
terminal blocks with miscellaneous connection
1-tier
2.5 mm²
4 mm²
General ordering data
Version
Feed-through terminal block, Solder connection, 2.5 mm², 400 V, 20 A, Number of connections: 1
Order No.
0300720000
Type
AKA 2.5
GTIN (EAN)
4008190072018
Qty.
100 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-12-31
Alternative product
1250650000
Dimensions and weights
Depth
23.5 mm
Depth (inches)
0.925 inch
Height
20 mm
Height (inches)
0.787 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
3.51 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material data
Material
KrG
Colour
medium yellow
UL 94 flammability rating
V-0, 5VA
System specifications
Version
For the mounting rails
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
1
Number of potentials per tier
1
Levels cross-connected internally
No
Additional technical data
Explosion-tested version
No
Installation advice
Feed-through (bushing)
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
12400-204
Current size D (CSA)
10 A
Voltage size D (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
24 AWG
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
2.5 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
1
Stripping length
9 mm
Tightening torque, max.
0.45 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Solder connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
2.5 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Installation advice
Feed-through (bushing)
Number of poles
1
Standards
In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
20 A
Current at maximum wires
20 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
26 AWG
Current size D (UR)
10 A
Voltage size D (UR)
300 V
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
There are no products in this group.
Version
Feed-through terminal block, Solder connection, 2.5 mm², 400 V, 20 A, Number of connections: 1
Order No.
0300720000
Type
AKA 2.5
GTIN (EAN)
4008190072018
Qty.
100 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-12-31
Alternative product
1250650000
Depth
23.5 mm
Depth (inches)
0.925 inch
Height
20 mm
Height (inches)
0.787 inch
Width
6 mm
Width (inches)
0.236 inch
Net weight
3.51 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material
KrG
Colour
medium yellow
UL 94 flammability rating
V-0, 5VA
Version
For the mounting rails
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
1
Number of potentials per tier
1
Levels cross-connected internally
No
Explosion-tested version
No
Installation advice
Feed-through (bushing)
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
12400-204
Current size D (CSA)
10 A
Voltage size D (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
24 AWG
Blade size
0.6 x 3.5 mm
Clamping range, max.
2.5 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
1
Stripping length
9 mm
Tightening torque, max.
0.45 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Solder connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
2.5 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Installation advice
Feed-through (bushing)
Number of poles
1
Standards
In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
20 A
Current at maximum wires
20 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
26 AWG
Current size D (UR)
10 A
Voltage size D (UR)
300 V
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
