DIN rail TS 35 | Weidmüller Product Catalogue

DIN rail TS 35

Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

Product group overview

	Type I 230 V / 400 V 230 V / 400 V with integrated fuse VPU I 280 V LCF 25 kA MB 400 V / 690 V 950 V Spare arrester	Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

	Type II VPU AC II VPU AC II+III S VPU AC II US series VPU AC II F with integrated fuse 230/400V IoT	Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

	Type III VPU III VPU III SO	Type III surge protection Compact type III arrester for AC/DC protection acc. to IEC 61643-11:2012 and EN 61643-11. Suitable for protecting end devices. Installed in the vicinity of the equipment to be protected. The arrester can be used as a single-port arrester when nominal current is greater than 16 A.

	Typ I: 230/400V; 400/690V Class I, LPL I,II,III,IV with remote alert Class I, LPL I,II,III,IV without remote alert Class I, LPL III,IV with remote alert Class I, LPL III,IV without remote alert LPL I,II,III,IV N-PE sparkover gap 260 V / 440 V VPU I spare arrester	Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

	Typ II Series; 230/400 V; 1000 V; Spare Arrester VPU II Spare arrester VPU II VPU II 280 V / 40 kA LCF	Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

Online Catalogue » Electronics » Lightning and Surge Protection » SPDs for energy systems » AC voltage » DIN rail TS 35 » Type I

Type I:

Online Catalogue » Electronics » Lightning and Surge Protection » SPDs for energy systems » AC voltage » DIN rail TS 35 » Type II

Type II:

Online Catalogue » Electronics » Lightning and Surge Protection » SPDs for energy systems » AC voltage » DIN rail TS 35 » Type III

Type III:

Online Catalogue » Electronics » Lightning and Surge Protection » SPDs for energy systems » AC voltage » DIN rail TS 35 » Typ I: 230/400V; 400/690V

Typ I: 230/400V; 400/690V:

Class I, LPL I,II,III,IV with remote alert

Class I, LPL I,II,III,IV without remote alert

Class I, LPL III,IV without remote alert

LPL I,II,III,IV N-PE sparkover gap 260 V / 440 V

Online Catalogue » Electronics » Lightning and Surge Protection » SPDs for energy systems » AC voltage » DIN rail TS 35 » Typ II Series; 230/400 V; 1000 V; Spare Arrester VPU II

Typ II Series; 230/400 V; 1000 V; Spare Arrester VPU II: