Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Universal range
Application range
Special loads
Sensor isolation
Signal adaption
High switching frequencies
Timing functions
Functional safety
Power
Capacitive loads
High DC voltages
Inductive loads
Wiring-optimized variants
D-SERIES DRL
D-SERIES DRW
MICROOPTO
General ordering data
Version
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 8...30 V DC, Continuous current: 2 A, Screw connection
Order No.
8937970000
Type
MOS 24VDC/8-30VDC 2A
GTIN (EAN)
4032248716203
Qty.
1 pc(s).
Dimensions and weights
Depth
97 mm
Depth (inches)
3.819 inch
Height
88.1 mm
Height (inches)
3.468 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
35.81 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-25 °C...60 °C
Humidity
5-95% relative humidity, Tu = 55°C, without condensation
Probability of failure
MTTF
847 a
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
d32f8e61-6733-45d6-9062-c95f9903aad6
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Control side
Rated control voltage
24 V DC ±20 %
Power rating
≤ 170 mW
Protective circuit
Varistor, Reverse polarity protection
Input frequency
125 Hz
Load side
Rated switching voltage
8...30 V DC
Continuous current
2 A
Max. switching current
4 A
Load category
LC A
Switch-on delay
0.1 ms
Switch-off delay
<0.5 ms
Voltage drop at max. load
≤ 50 mV
Leakage current
<10 µA
Min. switching current
100 µA
Short-circuit-proof
Yes (thermal cut-out)
Load side status indicator
LED green, output switched, LED red, short-circuit /overload at the output
Protective circuit, load side
Varistor, Free-wheeling diode
Contact type
1 NO contact (Intelligent POWER MOS-FET)
max. switching frequency (DC control voltage)
125 Hz
Nominal auxiliary voltage
8…30 V DC / max. 6 mA
General data
Version
with functional earth connection
Rail
TS 35
Colour
black
UL 94 flammability rating
V-0
UL94 flammability rating component
Component
Housing
UL94 flammability rating
V-0
Insulation coordination
Rated voltage
30 V
Pollution severity
2
Surge voltage category
III
Dielectric strength for control side - load side
350 Veff / 1 min.
Dielectric strength to mounting rail
350 Veff / 1 min.
Impulse withstand voltage
500 V (1,2/50 μ)
Protection degree
IP20
Further details of approvals / standards
Certificate No. (DNV)
TAE000033E
Certificate no. (cULus)
E141197
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Important note
Product information
The cable lengths must not exceed 30 m.
Classifications
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Order No.:
8937830000
Type:
MOS 24VDC/12-300VDC 1A
Version:
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 12...300 V DC, Continuous current: 1 A, Screw connection
Order No.:
8937940000
Type:
MOS 24VDC/5-33VDC 10A
Version:
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 5...33 V DC, Continuous current: 10 A, Screw connection
Version
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 8...30 V DC, Continuous current: 2 A, Screw connection
Order No.
8937970000
Type
MOS 24VDC/8-30VDC 2A
GTIN (EAN)
4032248716203
Qty.
1 pc(s).
Depth
97 mm
Depth (inches)
3.819 inch
Height
88.1 mm
Height (inches)
3.468 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
35.81 g
Storage temperature
-40 °C...80 °C
Operating temperature
-25 °C...60 °C
Humidity
5-95% relative humidity, Tu = 55°C, without condensation
REACH SVHC
Lead 7439-92-1
SCIP
d32f8e61-6733-45d6-9062-c95f9903aad6
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Rated control voltage
24 V DC ±20 %
Power rating
≤ 170 mW
Protective circuit
Varistor, Reverse polarity protection
Input frequency
125 Hz
Rated switching voltage
8...30 V DC
Continuous current
2 A
Max. switching current
4 A
Load category
LC A
Switch-on delay
0.1 ms
Switch-off delay
<0.5 ms
Voltage drop at max. load
≤ 50 mV
Leakage current
<10 µA
Min. switching current
100 µA
Short-circuit-proof
Yes (thermal cut-out)
Load side status indicator
LED green, output switched, LED red, short-circuit /overload at the output
Protective circuit, load side
Varistor, Free-wheeling diode
Contact type
1 NO contact (Intelligent POWER MOS-FET)
max. switching frequency (DC control voltage)
125 Hz
Nominal auxiliary voltage
8…30 V DC / max. 6 mA
Version
with functional earth connection
Rail
TS 35
Colour
black
UL 94 flammability rating
V-0
UL94 flammability rating component
Component
Housing
UL94 flammability rating
V-0
Rated voltage
30 V
Pollution severity
2
Surge voltage category
III
Dielectric strength for control side - load side
350 Veff / 1 min.
Dielectric strength to mounting rail
350 Veff / 1 min.
Impulse withstand voltage
500 V (1,2/50 μ)
Protection degree
IP20
Certificate No. (DNV)
TAE000033E
Certificate no. (cULus)
E141197
Wire connection method
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Product information
The cable lengths must not exceed 30 m.
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Order No.:
8937830000
Type:
MOS 24VDC/12-300VDC 1A
Version:
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 12...300 V DC, Continuous current: 1 A, Screw connection
Order No.:
8937940000
Type:
MOS 24VDC/5-33VDC 10A
Version:
MICROOPTO, Solid-state relay, Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 5...33 V DC, Continuous current: 10 A, Screw connection
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}