Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
CUBESERIES
D-SERIES
RIDERSERIES
MCZ-SERIES
TERMOPTO
Complete modules
Individual components
2 CO contacts (27 mm width)
3 CO contacts (27 mm width)
4 CO contacts (27 mm width)
RCI (16 mm width)
RCM (27 mm width)
PUSH IN connection
General ordering data
Version
RIDERSERIES RCI, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V DC, Continuous current: 8 A, PUSH IN, Test button available: No
Order No.
8897150000
Type
RCIKITP 24VDC 2CO LD
GTIN (EAN)
4032248646920
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-10-31
Alternative product
2576200000
Dimensions and weights
Depth
69.6 mm
Depth (inches)
2.74 inch
Height
98 mm
Height (inches)
3.858 inch
Width
15.8 mm
Width (inches)
0.622 inch
Net weight
52.92 g
Temperatures
Storage temperature
-40 °C...70 °C
Operating temperature
-40 °C...70 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Control side
Rated control voltage
24 V DC
Rated current DC
31.6 mA
Power rating
761 mW
Coil resistance
1440 Ω ± 10 %
Status indicator
Green LED
Protective circuit
Free-wheeling diode
Load side
Rated switching voltage
250 V AC
Continuous current
8 A
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
15 A / 4 s
AC switching capacity (resistive), max.
2000 VA
DC switching capacity (resistive), max.
192 W @ 24 V
Switch-on delay
≤ 10 ms
Switch-off delay
≤ 6 ms
Contact type
2 CO contact (AgNi)
Mechanical service life
AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
General data
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
black
Insulation coordination
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Insulating material group
IIIa
Clearance and creepage distances for control side - load side
≥ 8 mm
Dielectric strength for control side - load side
5 kVeff / 1min
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.
Dielectric strength of open contact
1 kVeff / 1 min
Impulse withstand voltage
5 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Relevant base
8869500000
Relevant relay
8870180000
Certificate no. (CSA) relay
249409-2426937
Certificate no. (CSA) base
249409-2295474
Certificate No. (DNV)
TAA000011A
Certificate no. (cURus) relay
E522350
Certificate no. (cURus) base
E223759
Connection data
Wire connection method
PUSH IN
Stripping length, rated connection
12 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.75 mm²
Clamping range, max.
1.5 mm²
Wire cross-section, solid, min.
0.75 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.75 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0.75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
Catalogues
Catalogues in PDF-format
Brochures
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
Version
RIDERSERIES RCI, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V DC, Continuous current: 8 A, PUSH IN, Test button available: No
Order No.
8897150000
Type
RCIKITP 24VDC 2CO LD
GTIN (EAN)
4032248646920
Qty.
10 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2024-10-31
Alternative product
2576200000
Depth
69.6 mm
Depth (inches)
2.74 inch
Height
98 mm
Height (inches)
3.858 inch
Width
15.8 mm
Width (inches)
0.622 inch
Net weight
52.92 g
Storage temperature
-40 °C...70 °C
Operating temperature
-40 °C...70 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Rated control voltage
24 V DC
Rated current DC
31.6 mA
Power rating
761 mW
Coil resistance
1440 Ω ± 10 %
Status indicator
Green LED
Protective circuit
Free-wheeling diode
Rated switching voltage
250 V AC
Continuous current
8 A
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
15 A / 4 s
AC switching capacity (resistive), max.
2000 VA
DC switching capacity (resistive), max.
192 W @ 24 V
Switch-on delay
≤ 10 ms
Switch-off delay
≤ 6 ms
Contact type
2 CO contact (AgNi)
Mechanical service life
AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles
Min. switching power
1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
Rail
TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
black
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Insulating material group
IIIa
Clearance and creepage distances for control side - load side
≥ 8 mm
Dielectric strength for control side - load side
5 kVeff / 1min
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.
Dielectric strength of open contact
1 kVeff / 1 min
Impulse withstand voltage
5 kV (1.2/50 µs)
Protection degree
IP20
Relevant base
8869500000
Relevant relay
8870180000
Certificate no. (CSA) relay
249409-2426937
Certificate no. (CSA) base
249409-2295474
Certificate No. (DNV)
TAA000011A
Certificate no. (cURus) relay
E522350
Certificate no. (cURus) base
E223759
Wire connection method
PUSH IN
Stripping length, rated connection
12 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.75 mm²
Clamping range, max.
1.5 mm²
Wire cross-section, solid, min.
0.75 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.75 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0.75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
Catalogues
Catalogues in PDF-format
Brochures
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
ECLASS 14.0
27-37-16-01
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
