Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4...20 mA and voltage signals from 0...(5)10 V. Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Tension-clamp connection / nominal cross-section 1.5 mm²Protection degree: IP 20 Input0(4)...20 mA 0...5 V / 0...10 V Output 4...20 mA Load resistance / R = (UB-12 V) / 20 mA z.b 600 Ohm at 20 mA Transmission error Auxiliary power 4...20 mA output current loopAmbienttemperature range 0°C...+55 °C
Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage 4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WAZ5 CCC OLP
Short specification
Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4 to 20 mA and voltage signals from 0 to (5)10 V.
Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4...20 mA and voltage signals from 0...(5)10 V. Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Tension-clamp connection / nominal cross-section 1.5 mm²Protection degree: IP 20 Input0(4)...20 mA 0...5 V / 0...10 V Output 4...20 mA Load resistance / R = (UB-12 V) / 20 mA z.b 600 Ohm at 20 mA Transmission error Auxiliary power 4...20 mA output current loopAmbienttemperature range 0°C...+55 °C
Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage 4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus
Type WAZ5 CCC OLP
Short specification
Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4 to 20 mA and voltage signals from 0 to (5)10 V.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.