8543730000 WAZ5 OLP | Weidmüller Product Catalogue

WAZ5 OLP Only remaining stock availableDo not use product for new developments

General ordering data
Version	Signal converter/insulator, Input : I / U, Output : 4-20 mA, (loop powered)
Order No.	8543730000
Type	WAZ5 OLP
GTIN (EAN)	4032248180769
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2022-03-30
Alternative product	7760054354

Dimensions and weights
Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	111 g

Temperatures
Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure
SIL in compliance with IEC 61508	None
MTTF	366 a

Environmental Product Compliance
REACH SVHC	Lead 7439-92-1
SCIP	94561991-a963-4084-a5f3-dfa3a5c2a27e

Input
Input current	0...20 mA, 4…20mA
Input resistance, current	51 Ω
Input resistance, voltage	0...5 V: 210 kΩ; 0...10 V: 430 kΩ
Input voltage	0...(5)10 V
Number of inputs	1

Output
Cut-off frequency (-3 dB)	10 Hz/ 100 Hz switchable
Load impedance current	R_L = (U_B-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Number of outputs	1
Output current	4...20 mA (current loop)
Output signal limit	Approx. 31 mA

General data
Accuracy	0.2% of measuring range final value
Configuration	DIP switch
Galvanic isolation	Passive isolator
Protection degree	IP20
Rail	TS 35
Step response time	<10 Hz: 80 ms; 100 Hz: 50 ms
Temperature coefficient	≤ 150 ppm/K
Voltage supply	min. 12 V DC/ max. 30 V DC, Loop powered, via 4…20 mA input

Insulation coordination
EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	4 kV
Insulation voltage	4 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data
Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note
Product information	This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.

Downloads
Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications
ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets
Long specification	Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4...20 mA and voltage signals from 0...(5)10 V. Add-on housing for TS35 DIN rail installation Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Tension-clamp connection / nominal cross-section 1.5 mm²Protection degree: IP 20 Input0(4)...20 mA 0...5 V / 0...10 V Output 4...20 mA Load resistance / R = (UB-12 V) / 20 mA z.b 600 Ohm at 20 mA Transmission error Auxiliary power 4...20 mA output current loopAmbienttemperature range 0°C...+55 °C Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC Test voltage 4 kV Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus Type WAZ5 CCC OLP
Short specification	Standard signal isolating amplifier, output-current loop fed 1-channel isolating amplifier in 17.5 mm width, output-current loop fed, for transmitting and isolating analogue DC- current signals from 4 to 20 mA and voltage signals from 0 to (5)10 V.

Approvals
Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

General ordering data

Version	Signal converter/insulator, Input : I / U, Output : 4-20 mA, (loop powered)
Order No.	8543730000
Type	WAZ5 OLP
GTIN (EAN)	4032248180769
Qty.	1 pc(s).
Delivery status	This article will no longer be available in the future.
Available until	2022-03-30
Alternative product	7760054354

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	17.5 mm
Width (inches)	0.689 inch
Length	92.4 mm
Length (inches)	3.638 inch
Net weight	111 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure

SIL in compliance with IEC 61508	None
MTTF	366 a

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	94561991-a963-4084-a5f3-dfa3a5c2a27e

Input

Input current	0...20 mA, 4…20mA
Input resistance, current	51 Ω
Input resistance, voltage	0...5 V: 210 kΩ; 0...10 V: 430 kΩ
Input voltage	0...(5)10 V
Number of inputs	1

Output

Cut-off frequency (-3 dB)	10 Hz/ 100 Hz switchable
Load impedance current	R_L = (U_B-12 V) / 20 ± 20mA, e.g. 600 Ω at 24 V
Number of outputs	1
Output current	4...20 mA (current loop)
Output signal limit	Approx. 31 mA

General data

Accuracy	0.2% of measuring range final value
Configuration	DIP switch
Galvanic isolation	Passive isolator
Protection degree	IP20
Rail	TS 35
Step response time	<10 Hz: 80 ms; 100 Hz: 50 ms
Temperature coefficient	≤ 150 ppm/K
Voltage supply	min. 12 V DC/ max. 30 V DC, Loop powered, via 4…20 mA input

Insulation coordination

EMC standards	EN 55011, EN 61000-6
Galvanic isolation	Passive isolator
Impulse withstand voltage	4 kV
Insulation voltage	4 kV_eff / 5 s
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
Eplan Data Portal	Eplan data
CADENAS eCATALOG	CAX data
WSCAD Universe	WSCAD data
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format
Brochures

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Standard signal isolating amplifier, output-current loop fed
1-channel isolating amplifier in 17.5 mm width, output-current loop fed,
for transmitting and isolating analogue DC- current signals from 4...20 mA and voltage signals
from 0...(5)10 V.
Add-on housing for TS35 DIN rail installation
Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm
Tension-clamp connection / nominal cross-section 1.5 mm²Protection degree: IP 20 Input0(4)...20 mA
0...5 V / 0...10 V
Output 4...20 mA
Load resistance / R = (UB-12 V) / 20 mA z.b 600 Ohm at 20 mA
Transmission error Auxiliary power 4...20 mA output current loopAmbienttemperature range 0°C...+55 °C

Isolation EN 50178 , 2-way isolation up to 4 kV AC/DC
Test voltage 4 kV
Rated
voltage 300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus

Type WAZ5 CCC OLP

Short specification

Approvals

Approvals
ROHS	Conform
UL File Number Search	UL Website
Certificate no. (cULus)	E141197

Related products

	Engineering Data
	Add to inquiry list / Ask about product
	PDF data sheet
	Accessories
	Related products
	Print view

Related products: