Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
Universal signal converter
Current measuring transducer
Frequency signal converter
Limit- & current monitoring
Serial interface converter
Temperature transducer
Signal converter
Rectifier modules
WAS5 CVC 4-20MA/0-10V
Product is no longer availableData sheet for information only
General ordering data
Version
Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V
Order No.
8540230000
Type
WAS5 CVC 4-20MA/0-10V
GTIN (EAN)
4032248180622
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2022-12-31
Alternative product
1176010000
Dimensions and weights
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
99.9 g
Temperatures
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...70 °C
Humidity at operating temperature
0...95 % (no condensation)
Probability of failure
SIL in compliance with IEC 61508
None
MTTF
371 a
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
Input
Input current
4...20 mA
Input resistance, current
≤ 110 Ω
Number of inputs
1
Output
Cut-off frequency (-3 dB)
10 Hz
Number of outputs
1
Output voltage, note
0...10 V
load impedance voltage
≥ 1 kΩ
Output (digital)
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
General data
Accuracy
0.2 %
Configuration
none
Galvanic isolation
3-way isolator
Power consumption
<1.3 W @ IOUT = 5 mA
Protection degree
IP20
Rail
TS 35
Step response time
≤ 45 ms
Temperature coefficient
± 250 ppm/K
Voltage supply
24 V DC ± 25 %
Insulation coordination
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Connection data
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Important note
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
User Documentation
Catalogues
Catalogues in PDF-format
Brochures
Classifications
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
ECLASS 14.0
27-21-01-20
Tender specification sheets
Long specification
Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width with external power supply, for transmitting and isolating analogue DC current signals 4...20 mA. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20 Input 4...20 mA Output 0...10 VTransmission error < 0,2% v. E. Limit frequency 10 Hz Auxiliary power 24 VDC +/- 25 % Power loss approx. 1.3 W Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage 4 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus,
Type WAS5 CVC 0-20/0-10V
Short specification
Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA
Approvals
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Order No.:
8447140000
Type of connection:
Tension-clamp connection
Type:
WAZ4 VVC DC 0-10/0-10V
Version:
Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8445050000
Type of connection:
Tension-clamp connection
Type:
WAZ4 CVC DC 4-20/0-10V
Version:
Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8540300000
Type of connection:
Tension-clamp connection
Type:
WAZ5 VCC 0-10V/4-20MA
Version:
Signal converter/insulator, Input : 0-10 V, Output : 4-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8540340000
Type of connection:
Tension-clamp connection
Type:
WAZ5 VVC 0-10V/0-10V
Version:
Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Version
Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V
Order No.
8540230000
Type
WAS5 CVC 4-20MA/0-10V
GTIN (EAN)
4032248180622
Qty.
1 pc(s).
Delivery status
Discontinued
Available until
2022-12-31
Alternative product
1176010000
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
99.9 g
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...70 °C
Humidity at operating temperature
0...95 % (no condensation)
SIL in compliance with IEC 61508
None
MTTF
371 a
REACH SVHC
Lead 7439-92-1
SCIP
b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
Input current
4...20 mA
Input resistance, current
≤ 110 Ω
Number of inputs
1
Cut-off frequency (-3 dB)
10 Hz
Number of outputs
1
Output voltage, note
0...10 V
load impedance voltage
≥ 1 kΩ
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
Accuracy
0.2 %
Configuration
none
Galvanic isolation
3-way isolator
Power consumption
<1.3 W @ IOUT = 5 mA
Protection degree
IP20
Rail
TS 35
Step response time
≤ 45 ms
Temperature coefficient
± 250 ppm/K
Voltage supply
24 V DC ± 25 %
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
3-way isolator
Impulse withstand voltage
4 kV
Insulation voltage
2 kVeff / 5 s
Insulation voltage input or output/rail
4 kVeff / 1 min.
Insulation voltage input or output/supply
2 kVeff / 5 s
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Type of connection
Screw connection
Stripping length, rated connection
7 mm
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.5 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
ECLASS 14.0
27-21-01-20
Long specification
Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width with external power supply, for transmitting and isolating analogue DC current signals 4...20 mA. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 17.5/ 112.4 mm Screw connection / Nominal cross-section 2.5 mm2 Protection degree: IP 20 Input 4...20 mA Output 0...10 VTransmission error < 0,2% v. E. Limit frequency 10 Hz Auxiliary power 24 VDC +/- 25 % Power loss approx. 1.3 W Ambient temperature range 0 °C...+55 °C
Secure isolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each other Test voltage 4 kV input against output against auxiliary power Rated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus,
Type WAS5 CVC 0-20/0-10V
Short specification
Standard signal isolating converter 1-channel signal isolating converter in 17.5 mm width, with external power supply, for transmitting and isolating analogue DC current signals from 4 to 20 mA
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Order No.:
8447140000
Type of connection:
Tension-clamp connection
Type:
WAZ4 VVC DC 0-10/0-10V
Version:
Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8445050000
Type of connection:
Tension-clamp connection
Type:
WAZ4 CVC DC 4-20/0-10V
Version:
Signal converter/insulator, Input : 4-20 mA, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Order No.:
8540300000
Type of connection:
Tension-clamp connection
Type:
WAZ5 VCC 0-10V/4-20MA
Version:
Signal converter/insulator, Input : 0-10 V, Output : 4-20 mA
Delivery status:
This article will no longer be available in the future.
Order No.:
8540340000
Type of connection:
Tension-clamp connection
Type:
WAZ5 VVC 0-10V/0-10V
Version:
Signal converter/insulator, Input : 0-10 V, Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.