Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
Universal signal converter
Current measuring transducer
Frequency signal converter
Limit- & current monitoring
Serial interface converter
Temperature transducer
Signal converter
Rectifier modules
WTZ4 PT100/3 V 0-10V
Do not use product for new developmentsOnly remaining stock available
General ordering data
Version
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Order No.
8432130000
Type
WTZ4 PT100/3 V 0-10V
GTIN (EAN)
4032248110131
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-12-30
Alternative product
7760054183
Dimensions and weights
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
12.5 mm
Width (inches)
0.492 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
120 g
Temperatures
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
Probability of failure
SIL in compliance with IEC 61508
None
Environmental Product Compliance
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
c2a21576-d875-4548-ae68-5e7f85ddf0c7
Input
Number of inputs
1
Sensor
PT100 (3 wire)
Sensor supply
1.45 mA
Temperature input range
Adjustable from -200...+800°C
Output
Load impedance current
≤ 500 Ω
Number of outputs
1
Output voltage, note
0...10 V
load impedance voltage
≥ 1 kΩ
General data
Accuracy
± 0.5 % of measuring range
Configuration
DIP switch, Potentiometer, and PT100-Simulator
Current consumption
< 38 mA @ IOUT = 20 mA
Galvanic isolation
Without isolation
Linearity
Yes
Protection degree
IP20
Rail
TS 35
Temperature coefficient
Measuring range ≥ 200 K: ≤ 200 ppm/K (typ. 80 ppm/K) 100 K <= measuring range <200 K: <250 ppm/K (typ. 100 ppm/K)
Voltage supply
24 V DC ± 20 %
Insulation coordination
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
Without isolation
Connection data
Type of connection
Tension-clamp connection
Stripping length, rated connection
7 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Important note
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
User Documentation
Catalogues
Catalogues in PDF-format
Brochures
Classifications
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Tender specification sheets
Long specification
PT100 temperature measuring transformer, configured with DIP switches, 3-wire connection technology RTD measurement isolating transformer in 12.5 mm width with external power supply, for transmitting PT100- 3-wire signals. Input temperature range -200...+800 °C . Analogue DC signals 0...10 V are available on the output side. Zero/span compensation with potentiometer. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20 Input PT100, 3-wire Output 0...10 V Load resistance > 1 kOhm Transmission error < 0,5 % v. E. typ. 200 ppm / °C Auxiliary power 24 VDC +/- 20 % Ambient temperature range 0°C...+55 °C Isolation no electrical isolationApprovals cULus, CSA
Type WTZ4 PT100/3 V 0-10V
Short specification
PT100 temperature measuring transformer, configured with DIP switches, 3-wire connection technology RTD measurement isolating transformer in 12.5 mm width with external power supply, for transmitting PT100- 3-wire signals. Input temperature range -200...+800 °C . Analogue DC signals 0...10 V are available on the output side. Zero/span compensation with potentiometer.
Type of connection:
Screw connection
Order No.:
8560700000
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432220000
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432190000
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432160000
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432280000
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432250000
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
8560720000
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
Version
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0-10 V
Order No.
8432130000
Type
WTZ4 PT100/3 V 0-10V
GTIN (EAN)
4032248110131
Qty.
1 pc(s).
Delivery status
This article will no longer be available in the future.
Available until
2023-12-30
Alternative product
7760054183
Depth
112.4 mm
Depth (inches)
4.425 inch
Width
12.5 mm
Width (inches)
0.492 inch
Length
92.4 mm
Length (inches)
3.638 inch
Net weight
120 g
Storage temperature
-20 °C...85 °C
Operating temperature
0 °C...55 °C
SIL in compliance with IEC 61508
None
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
REACH SVHC
Lead 7439-92-1
SCIP
c2a21576-d875-4548-ae68-5e7f85ddf0c7
Number of inputs
1
Sensor
PT100 (3 wire)
Sensor supply
1.45 mA
Temperature input range
Adjustable from -200...+800°C
Load impedance current
≤ 500 Ω
Number of outputs
1
Output voltage, note
0...10 V
load impedance voltage
≥ 1 kΩ
Accuracy
± 0.5 % of measuring range
Configuration
DIP switch, Potentiometer, and PT100-Simulator
Current consumption
< 38 mA @ IOUT = 20 mA
Galvanic isolation
Without isolation
Linearity
Yes
Protection degree
IP20
Rail
TS 35
Temperature coefficient
Measuring range ≥ 200 K: ≤ 200 ppm/K (typ. 80 ppm/K) 100 K <= measuring range <200 K: <250 ppm/K (typ. 100 ppm/K)
Voltage supply
24 V DC ± 20 %
EMC standards
EN 55011, EN 61000-6
Galvanic isolation
Without isolation
Type of connection
Tension-clamp connection
Stripping length, rated connection
7 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Product information
This product will soon be replaced by a new product. Please do not use with new systems. Please contact our technical support.
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
User Documentation
Catalogues
Catalogues in PDF-format
Brochures
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Long specification
PT100 temperature measuring transformer, configured with DIP switches, 3-wire connection technology RTD measurement isolating transformer in 12.5 mm width with external power supply, for transmitting PT100- 3-wire signals. Input temperature range -200...+800 °C . Analogue DC signals 0...10 V are available on the output side. Zero/span compensation with potentiometer. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2 Protection degree: IP 20 Input PT100, 3-wire Output 0...10 V Load resistance > 1 kOhm Transmission error < 0,5 % v. E. typ. 200 ppm / °C Auxiliary power 24 VDC +/- 20 % Ambient temperature range 0°C...+55 °C Isolation no electrical isolationApprovals cULus, CSA
Type WTZ4 PT100/3 V 0-10V
Short specification
PT100 temperature measuring transformer, configured with DIP switches, 3-wire connection technology RTD measurement isolating transformer in 12.5 mm width with external power supply, for transmitting PT100- 3-wire signals. Input temperature range -200...+800 °C . Analogue DC signals 0...10 V are available on the output side. Zero/span compensation with potentiometer.
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E141197
Type of connection:
Screw connection
Order No.:
8560700000
Type:
WAS5 PRO RTD
Version:
RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432220000
Type:
WTZ4 PT100/2 C 0/4-20MA
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432190000
Type:
WTZ4 PT100/2 V 0-10V
Version:
RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432160000
Type:
WTZ4 PT100/3 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-wire connection technology, Configurable, Input : Temperature, PT100 (3- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432280000
Type:
WTZ4 PT100/4 C 0/4-20MA
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0(4)-20 mA
Delivery status:
This article will no longer be available in the future.
Type of connection:
Tension-clamp connection
Order No.:
8432250000
Type:
WTZ4 PT100/4 V 0-10V
Version:
RTD transformer, PT100, 2-/3-/4-wire connection technology, Configurable, Input : Temperature, PT100 (4- wire), Output : 0-10 V
Delivery status:
This article will no longer be available in the future.
Type of connection:
Screw connection
Order No.:
8560720000
Type:
WAS5 PRO THERMO
Version:
TC isolating transformer, Configurable, Input : thermocouple, Output : I / U
Delivery status:
This article will no longer be available in the future.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.