Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Electromechanical relays
Solid-state relays
General ordering data
Version
MCZ SERIES, Solid-state relay, Rated control voltage: 5 V TTL , Rated switching voltage: 5...48 V DC, Continuous current: 0.1 A, Tension-clamp connection
Order No.
8398940000
Type
MCZ O 5VTTL
GTIN (EAN)
4008190985448
Qty.
10 pc(s).
Dimensions and weights
Depth
63.2 mm
Depth (inches)
2.488 inch
Height
91 mm
Height (inches)
3.583 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
20.2 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
Probability of failure
MTTF
2,114 a
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Rated data UL
Certificate No. (cURus)
E141197
Control side
Rated control voltage
5 V TTL
Nominal control current
1.65 mA DC
Power rating
10 mW
Status indicator
Green LED
Input frequency
2.4 kHz
Nominal auxiliary voltage
5 V DC ±5 %
Load side
Rated switching voltage
5...48 V DC
Continuous current
0.1 A
Switch-on delay
<17 µs
Switch-off delay
<250 µs
Voltage drop at max. load
≤ 1.8 V
Short-circuit-proof
No
Protective circuit, load side
Diode circuit
Contact type
1 NO contact (TTL)
max. switching frequency (DC control voltage)
2.4 kHz
General data
Rail
TS 35
Test button available
No
Colour
beige
UL94 flammability rating component
Component
Housing
UL94 flammability rating
V-0
Insulation coordination
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Dielectric strength for control side - load side
1 kVeff / 1 s
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
6 kV (1.2/50 µs)
Protection degree
IP20
Further details of approvals / standards
Certificate No. (CSA)
154685-1198742
Certificate No. (cURus)
E141197
Connection data
Wire connection method
Tension-clamp connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26
Wire cross-section, solid, max. (AWG)
AWG 16
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26
Wire cross-section, finely stranded, max. (AWG)
AWG 16
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Important note
Product information
The cable lengths must not exceed 30 m.
Classifications
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Order No.:
8324610000
Type:
MCZ O 24VDC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V DC ±16 % , Rated switching voltage: 5 V TTL, Continuous current: 8 ma, Fan out = 20 LS-TTL, Tension-clamp connection
Order No.:
8287730000
Type:
MCZ O 24VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 24 VDC ±20%, Continuous current: 2 A, Tension-clamp connection
Order No.:
8365940000
Type:
MCZ O 24VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 5...48 V DC, Continuous current: 20 mA, Tension-clamp connection
Order No.:
8421060000
Type:
MCZ O 120VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 120 V UC +5 / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 50 mA, Tension-clamp connection
Order No.:
8421380000
Type:
MCZ O 230VAC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 230 V AC +5 % / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 20 mA, Tension-clamp connection
Order No.:
8820710000
Type:
MCZ O TRAK 24.110VDC
Version:
MCZ-SERIES TRAK, Solid-state relay, Rated control voltage: 24...110 V DC -30 / +25 % , Rated switching voltage: 5...137.5 V DC, Continuous current: 250 mA @ 50 °C, Tension-clamp connection
Version
MCZ SERIES, Solid-state relay, Rated control voltage: 5 V TTL , Rated switching voltage: 5...48 V DC, Continuous current: 0.1 A, Tension-clamp connection
Order No.
8398940000
Type
MCZ O 5VTTL
GTIN (EAN)
4008190985448
Qty.
10 pc(s).
Depth
63.2 mm
Depth (inches)
2.488 inch
Height
91 mm
Height (inches)
3.583 inch
Width
6.1 mm
Width (inches)
0.24 inch
Net weight
20.2 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40 °C
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Certificate No. (cURus)
E141197
Rated control voltage
5 V TTL
Nominal control current
1.65 mA DC
Power rating
10 mW
Status indicator
Green LED
Input frequency
2.4 kHz
Nominal auxiliary voltage
5 V DC ±5 %
Rated switching voltage
5...48 V DC
Continuous current
0.1 A
Switch-on delay
<17 µs
Switch-off delay
<250 µs
Voltage drop at max. load
≤ 1.8 V
Short-circuit-proof
No
Protective circuit, load side
Diode circuit
Contact type
1 NO contact (TTL)
max. switching frequency (DC control voltage)
2.4 kHz
Rail
TS 35
Test button available
No
Colour
beige
UL94 flammability rating component
Component
Housing
UL94 flammability rating
V-0
Rated voltage
300 V
Pollution severity
2
Surge voltage category
III
Clearance and creepage distances for control side - load side
≥ 5.5 mm
Dielectric strength for control side - load side
1 kVeff / 1 s
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage
6 kV (1.2/50 µs)
Protection degree
IP20
Certificate No. (CSA)
154685-1198742
Certificate No. (cURus)
E141197
Wire connection method
Tension-clamp connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
1.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 16
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
1.5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26
Wire cross-section, solid, max. (AWG)
AWG 16
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26
Wire cross-section, finely stranded, max. (AWG)
AWG 16
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1.5 mm²
Blade size
0.6 x 3.5 mm
Product information
The cable lengths must not exceed 30 m.
ETIM 6.0
EC001504
ETIM 7.0
EC001504
ETIM 8.0
EC001504
ETIM 9.0
EC001504
ECLASS 9.0
27-37-16-04
ECLASS 9.1
27-37-16-04
ECLASS 10.0
27-37-16-04
ECLASS 11.0
27-37-16-04
ECLASS 12.0
27-37-16-04
ECLASS 13.0
27-37-16-04
ECLASS 14.0
27-37-16-04
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E141197
Order No.:
8324610000
Type:
MCZ O 24VDC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V DC ±16 % , Rated switching voltage: 5 V TTL, Continuous current: 8 ma, Fan out = 20 LS-TTL, Tension-clamp connection
Order No.:
8287730000
Type:
MCZ O 24VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 24 VDC ±20%, Continuous current: 2 A, Tension-clamp connection
Order No.:
8365940000
Type:
MCZ O 24VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 24 V UC ±20 % , Rated switching voltage: 5...48 V DC, Continuous current: 20 mA, Tension-clamp connection
Order No.:
8421060000
Type:
MCZ O 120VUC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 120 V UC +5 / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 50 mA, Tension-clamp connection
Order No.:
8421380000
Type:
MCZ O 230VAC
Version:
MCZ SERIES, Solid-state relay, Rated control voltage: 230 V AC +5 % / -15 % , Rated switching voltage: 5...48 V DC, Continuous current: 20 mA, Tension-clamp connection
Order No.:
8820710000
Type:
MCZ O TRAK 24.110VDC
Version:
MCZ-SERIES TRAK, Solid-state relay, Rated control voltage: 24...110 V DC -30 / +25 % , Rated switching voltage: 5...137.5 V DC, Continuous current: 250 mA @ 50 °C, Tension-clamp connection
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.