Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
EPAK
General ordering data
Order No.
7760054310
Type
WPM-VMR-3PH-PH
GTIN (EAN)
4050118477849
Qty.
1 pc(s).
Dimensions and weights
Depth
58 mm
Depth (inches)
2.283 inch
Width
22.5 mm
Width (inches)
0.886 inch
Length
90 mm
Length (inches)
3.543 inch
Net weight
59.64 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
Probability of failure
SIL in compliance with IEC 61508
None
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Input
Input frequency
40…60 Hz
Input voltage
400V AC (L-L) ±15%
Number of inputs
1 x three-phase (R, S, T, N)
Output (digital)
Alarm function
Phase error
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Rated switching current
3 A
Type
Relay, 1 CO contact
General data
Configuration
none
Galvanic isolation
between input/output, between input ⁄ output ⁄ supply
Protection degree
IP20
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
≤ 250 ppm/K of measuring range, 350 ppm/K
Voltage supply
from the measuring circuit
Insulation coordination
EMC standards
IEC 61000-6-2, IEC 61000-6-4
Galvanic isolation
between input/output, between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2 kV DC / 1 min.
Pollution severity
2
Rated voltage
300 V
Surge voltage category
II
Connection data
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
Classifications
ETIM 6.0
EC002654
ETIM 7.0
EC002654
ETIM 8.0
EC002654
ETIM 9.0
EC002654
ECLASS 9.0
27-21-01-22
ECLASS 9.1
27-21-01-22
ECLASS 10.0
27-21-01-22
ECLASS 11.0
27-21-01-22
ECLASS 12.0
27-21-01-22
ECLASS 13.0
27-21-01-22
ECLASS 14.0
27-21-01-22
Approvals
Approvals
ROHS
Conform
Order No.
7760054310
Type
WPM-VMR-3PH-PH
GTIN (EAN)
4050118477849
Qty.
1 pc(s).
Depth
58 mm
Depth (inches)
2.283 inch
Width
22.5 mm
Width (inches)
0.886 inch
Length
90 mm
Length (inches)
3.543 inch
Net weight
59.64 g
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
SIL in compliance with IEC 61508
None
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Input frequency
40…60 Hz
Input voltage
400V AC (L-L) ±15%
Number of inputs
1 x three-phase (R, S, T, N)
Alarm function
Phase error
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Rated switching current
3 A
Type
Relay, 1 CO contact
Configuration
none
Galvanic isolation
between input/output, between input ⁄ output ⁄ supply
Protection degree
IP20
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
≤ 250 ppm/K of measuring range, 350 ppm/K
Voltage supply
from the measuring circuit
EMC standards
IEC 61000-6-2, IEC 61000-6-4
Galvanic isolation
between input/output, between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2 kV DC / 1 min.
Pollution severity
2
Rated voltage
300 V
Surge voltage category
II
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
ETIM 6.0
EC002654
ETIM 7.0
EC002654
ETIM 8.0
EC002654
ETIM 9.0
EC002654
ECLASS 9.0
27-21-01-22
ECLASS 9.1
27-21-01-22
ECLASS 10.0
27-21-01-22
ECLASS 11.0
27-21-01-22
ECLASS 12.0
27-21-01-22
ECLASS 13.0
27-21-01-22
ECLASS 14.0
27-21-01-22
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.