Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Isolating amplifier and measuring transducer
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Network-compatible measuring transducer - ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
EPAK
General ordering data
Order No.
7760054304
Type
EPAK-TMR-PTC
GTIN (EAN)
6944169742453
Qty.
1 pc(s).
Dimensions and weights
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...85 % rel. humidity
Environmental Product Compliance
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input
Input measurement range
PT100 -50°C…100°C
Output (digital)
Alarm function
Over-temperature, Temperature limit (relay currentless): 3.6 kΩ ±5%, Temperature hysteresis (relay supplied with current): 1.6 kΩ ±5%
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Rated switching current
3 A
Type
Relay, 1 CO contact
General data
Configuration
none
Galvanic isolation
between input/output
Power consumption
<60mA @ 24VDC
Protection degree
IP20
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
350 ppm/K
Voltage supply
18…30 VDC
Insulation coordination
EMC standards
EN 61000-6-2, EN 61000-6-4
Galvanic isolation
between input/output
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2.2 kVAC, 1 min, 50 Hz
Pollution severity
2
Rated voltage
300 V ACrms
Surge voltage category
II
Connection data
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
Classifications
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Approvals
Approvals
ROHS
Conform
Order No.
7760054304
Type
EPAK-TMR-PTC
GTIN (EAN)
6944169742453
Qty.
1 pc(s).
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...85 % rel. humidity
RoHS Compliance Status
Compliant
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input measurement range
PT100 -50°C…100°C
Alarm function
Over-temperature, Temperature limit (relay currentless): 3.6 kΩ ±5%, Temperature hysteresis (relay supplied with current): 1.6 kΩ ±5%
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Rated switching current
3 A
Type
Relay, 1 CO contact
Configuration
none
Galvanic isolation
between input/output
Power consumption
<60mA @ 24VDC
Protection degree
IP20
Step response time
≤ 200 ms (10…90%)
Temperature coefficient
350 ppm/K
Voltage supply
18…30 VDC
EMC standards
EN 61000-6-2, EN 61000-6-4
Galvanic isolation
between input/output
Impulse withstand voltage
4 kV (1.2/50 µs)
Insulation voltage
2.2 kVAC, 1 min, 50 Hz
Pollution severity
2
Rated voltage
300 V ACrms
Surge voltage category
II
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
ETIM 6.0
EC002919
ETIM 7.0
EC002919
ETIM 8.0
EC002919
ETIM 9.0
EC002919
ECLASS 9.0
27-21-01-29
ECLASS 9.1
27-21-01-29
ECLASS 10.0
27-21-01-29
ECLASS 11.0
27-21-01-29
ECLASS 12.0
27-21-01-29
ECLASS 13.0
27-21-01-29
ECLASS 14.0
27-21-01-29
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
