Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
e-mobility
Photovoltaics
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
EPAK
General ordering data
Order No.
7760054299
Type
EPAK-VM-CO-H
GTIN (EAN)
6944169742378
Qty.
1 pc(s).
Dimensions and weights
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity
5...85 % rel. humidity, no condensation
Probability of failure
SIL in compliance with IEC 61508
None
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input
Input voltage
UN1 : 0…300 V AC, UN2 : 0…125 V AC, UN3 : 0…300 V DC, UN4 : 0…30 V DC
Output
Load impedance current
≤ 500 Ω
Output current
4...20 mA
Output (digital)
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
General data
Accuracy
0.5 % FSR
Configuration
DIP switch
Galvanic isolation
between input ⁄ output ⁄ supply
Power consumption
2.5 W @ 24 V DC
Protection degree
IP20
Step response time
<300 ms
Temperature coefficient
≤ 250 ppm/K of final value
Voltage supply
18...30 V DC
Insulation coordination
EMC standards
IEC 61000-6 /-2, IEC 61000-6-4
Galvanic isolation
between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2 / 50 μs) input - output/ supply, 800 V (1.2 / 50 μs) output - supply
Insulation voltage
500 VAC (1.2 / 50 μs) output - supply
Insulation voltage input or output/supply
2.2 kVAC, 1 min, 50 Hz
Pollution severity
2
Surge voltage category
II
Test voltage
0.3 kV
Connection data
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
Classifications
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
Approvals
Approvals
ROHS
Conform
Order No.
7760054299
Type
EPAK-VM-CO-H
GTIN (EAN)
6944169742378
Qty.
1 pc(s).
Depth
89 mm
Depth (inches)
3.504 inch
Height
100 mm
Height (inches)
3.937 inch
Width
17.5 mm
Width (inches)
0.689 inch
Length
100 mm
Length (inches)
3.937 inch
Net weight
80 g
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity
5...85 % rel. humidity, no condensation
SIL in compliance with IEC 61508
None
REACH SVHC
Lead 7439-92-1
SCIP
6a722fc5-2d22-41b4-9544-5b95e45a4b77
Input voltage
UN1 : 0…300 V AC, UN2 : 0…125 V AC, UN3 : 0…300 V DC, UN4 : 0…30 V DC
Load impedance current
≤ 500 Ω
Output current
4...20 mA
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
Accuracy
0.5 % FSR
Configuration
DIP switch
Galvanic isolation
between input ⁄ output ⁄ supply
Power consumption
2.5 W @ 24 V DC
Protection degree
IP20
Step response time
<300 ms
Temperature coefficient
≤ 250 ppm/K of final value
Voltage supply
18...30 V DC
EMC standards
IEC 61000-6 /-2, IEC 61000-6-4
Galvanic isolation
between input ⁄ output ⁄ supply
Impulse withstand voltage
4 kV (1.2 / 50 μs) input - output/ supply, 800 V (1.2 / 50 μs) output - supply
Insulation voltage
500 VAC (1.2 / 50 μs) output - supply
Insulation voltage input or output/supply
2.2 kVAC, 1 min, 50 Hz
Pollution severity
2
Surge voltage category
II
Test voltage
0.3 kV
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2 mm²
Wire connection cross section AWG, min.
AWG 30
Wire connection cross section AWG, max.
AWG 14
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.