3 phase AC (3P, 3P +N), Secondary side of a current transformer 0-1 A or 0-5 A
Number of digital inputs
4
Number of digital outputs
2
Temperature input
No
Measurement data recording
Update interval register
1 s
Software
EM configuration tools
Technical data
Display monitoring (monitor)
LCD digital
Display value
Voltage, current measured value, Apparent power, Reactive power, Power factor, Frequency, Import / export active power demand, Total import / export active energy, Total import / export reactive energy, Total system power demand
Max. current
9999 A
Pollution severity
2
Power factor input
± 0.01
Protection degree
IP20, Front panel: IP51
Rated current
via current transformer 1 A/5 A
Type of mounting
Frontpanel mounting
Version
Power measurement/display for 1-, 3-phase mains, use of CT, pulse output,, digital input/output,, Modbus RTU
Measurement range, voltage L-N, AC
50…345 V
Measurement range, voltage L-L, AC
50…600 V
Surge voltage category
III
Voltage supply
75…270 V AC, 100…380 V DC
Three-wire system
Yes
Four-wire system
Yes
Sampling frequency 50/60 Hz
14.4 kHz
Continuous measurements
Yes
Measurement result per second
1 s
Current-measuring channels
3
Measuring accuracy for voltage
0.5 %
Measuring accuracy for current
0.5 %
Measurement accuracy for active energy (kWh, .../5 A)
Class 0.5S (IEC 62053-22), Class 0.5 (IEC 61557-12)
Clock
Yes
Insulation coordination
Pollution severity
2
Surge voltage category
III
Connection data
Stripping length
8 mm
Type of connection
Screw connection
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
Voltage, current measured value, Apparent power, Reactive power, Power factor, Frequency, Import / export active power demand, Total import / export active energy, Total import / export reactive energy, Total system power demand
Max. current
9999 A
Pollution severity
2
Power factor input
± 0.01
Protection degree
IP20, Front panel: IP51
Rated current
via current transformer 1 A/5 A
Type of mounting
Frontpanel mounting
Version
Power measurement/display for 1-, 3-phase mains, use of CT, pulse output,, digital input/output,, Modbus RTU
Measurement range, voltage L-N, AC
50…345 V
Measurement range, voltage L-L, AC
50…600 V
Surge voltage category
III
Voltage supply
75…270 V AC, 100…380 V DC
Three-wire system
Yes
Four-wire system
Yes
Sampling frequency 50/60 Hz
14.4 kHz
Continuous measurements
Yes
Measurement result per second
1 s
Current-measuring channels
3
Measuring accuracy for voltage
0.5 %
Measuring accuracy for current
0.5 %
Measurement accuracy for active energy (kWh, .../5 A)
Class 0.5S (IEC 62053-22), Class 0.5 (IEC 61557-12)
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}