Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Switched-mode power supply units
Electronic load monitoring
Communication modules
Uninterruptible power supply
DC/DC converter
Diode- and redundancy modules
Pre charge unit
Decentralised switched-mode power supply units IP65
Decentralised electronic load monitoring IP65
Accessories
FieldPower® PROtop 3-phase with power bus
FieldPower® PROtop 3-phase with maxGUARD
FieldPower® PROtop 3-phase assembly kit
FieldPower® PROtop 1-phase assembly kit
General ordering data
Version
FieldPower® power supply unit, IP65, in closed state, in complete state, 20A, 24 V, DC, IDC terminal, PUSH IN, M12 A-coded (IO-Link)
Order No.
2743460000
Type
FP PRO TOP3 24/20 2PIOL
GTIN (EAN)
4050118892130
Qty.
1 pc(s).
Dimensions and weights
Depth
220 mm
Depth (inches)
8.661 inch
Height
196 mm
Height (inches)
7.717 inch
Width
196 mm
Width (inches)
7.717 inch
Net weight
4,256 g
Temperatures
Storage temperature
-10 °C...60 °C
Operating temperature
-25 °C...45 °C
Operating temperature range
-25 °C ... +45 °C (regard derating) Start up ≥ -40 °C
Humidity
35…85%, non condensing and non freezing
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1, Potassium perfluorobutane sulfonate 29420-49-3
SCIP
7645f3b1-6db9-495d-9e21-ab1d894aff05
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
Input
AC current consumption
1,5 A @ 400 V DC / 2 A @ 320 V AC
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
DC input voltage range
450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC
45…65 Hz
Recommended back-up fuse
3 - 5 A, Char C
Surge protection
Varistor
Inrush current
Max. 10 A
Input fuse (internal)
5 A F (6.3 x 32 mm)
Output
Adjustable rated current
No
Output current
20A
Output power
480 W
Output voltage
24 V
Output voltage type
DC
Output voltage, max.
28.8 V
Output voltage, min.
22.5 V
Output voltage, note
(adjustable via potentiometer)
Switch-on delay
1 s
Triggering characteristic
see characteristic curve
Rated output voltage
24 V DC ± 1 %
Nominal output current for Unom
20 A @ 60 °C
General data
Humidity
35…85%, non condensing and non freezing
Installation advice
Lid screws included
Protection degree
IP65, in closed state, in complete state
Short-circuit protection
Yes, internal
Standards
UL 508
Surge voltage category
III, II
Insulation coordination
Surge voltage category
III, II
Connection data (input)
Connection system
IDC terminal
Clamping capacity
Connection data - contact element power bus
Wire connection method
Insulation displacement connection (IDC)
Blade size of operating tool
0.6 x 3.5 mm
Number of poles
5
Conductor connection cross-section, solid, max.
6 mm²
Conductor connection cross-section, solid, min.
1.5 mm²
Conductor connection cross-section, stranded, max.
6 mm²
Conductor connection cross-section, stranded, min.
2.5 mm²
Conductor connection cross-section, finely stranded, max.
6 mm²
Conductor connection cross-section, finely stranded, min.
2.5 mm²
Conductor connection cross-section, finest stranded, max.
6 mm²
Conductor connection cross-section, finest stranded, min.
2.5 mm²
Connection data - contact element Branch / Feed-in
Wire connection method
PUSH IN
Blade size of operating tool
0.6 x 3.5 mm
Stripping length
14 mm
Number of poles
5
Conductor connection cross-section, solid, max.
6 mm²
Conductor connection cross-section, solid, min.
0.5 mm²
Conductor connection cross-section, stranded, max.
6 mm²
Conductor connection cross-section, stranded, min.
0.5 mm²
Conductor connection cross-section, finely stranded, max.
10 mm²
Conductor connection cross-section, finely stranded, min.
0.5 mm²
Conductor connection cross-section, finest stranded, max.
6 mm²
Conductor connection cross-section, finest stranded, min.
0.5 mm²
Conductor connection cross-section with wire end ferrule
Type of wire end ferrule
12 mm with plastic collar
Standard
DIN 46228/1
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
12 mm with plastic collar
Standard
DIN 46228/4
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
8 mm with plastic collar
Standard
DIN 46228/1
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
8 mm with plastic collar
Standard
DIN 46228/4
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
Twin wire-end ferrules
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Rated data acc. to IEC
Rated data acc. to IEC for contact element
Voltage type
AC, DC
Standard
IEC 60947-7-1, IEC 60947-7-2
Rated voltage
800 V
Rated impulse withstand voltage
8 kV
Rated current (3 loaded poles)
41 A
Rated current (4 loaded poles)
25 A
Rated data acc. to IEC for fuse plug
Voltage type
AC
Number of phases
3
Standard
IEC 61984, IEC 60947-7-3
Rated voltage
36 V
Rated impulse withstand voltage
6 kV
Rated current
12 A
Rated data acc. to IEC for plug-in connector
Voltage type
DC
Standard
IEC 60947-7-1, IEC 60947-7-2, IEC 61984
Rated voltage
690 V
Rated impulse withstand voltage
8 kV
Rated current (3 loaded poles)
32 A
Rated current (4 loaded poles)
25 A
Rated data acc. to UL
Rated data acc. to UL for contact element
Standard
UL 1059
Note
for use with UL-listed TC-ER cables
Conductor connection cross-section, AWG, max.
AWG 10
Conductor connection cross-section, AWG, min.
AWG 14
Rated voltage
600 V
Rated current
30 A
Rated data acc. to UL for fuse plug
Rated data acc. to UL for plug-in connector
Standard
UL 1059
Note
for use with UL-listed TC-ER cables
Conductor connection cross-section, AWG, max.
AWG 12
Conductor connection cross-section, AWG, min.
AWG 16
Rated voltage
600 V
Rated current
20 A
Standards
UL 508
Downloads
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
User Documentation
Catalogues
Catalogues in PDF-format
Classifications
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-90-02
ECLASS 14.0
27-04-07-01
Order No.:
2743440000
Type:
FP PRO TOP3 24/10 2P
Version:
FieldPower® power supply unit, IP65, in complete state, 10A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded
Order No.:
2743450000
Type:
FP PRO TOP3 24/20 2P
Version:
FieldPower® power supply unit, IP65, in closed state, in complete state, 20A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded
Version
FieldPower® power supply unit, IP65, in closed state, in complete state, 20A, 24 V, DC, IDC terminal, PUSH IN, M12 A-coded (IO-Link)
Order No.
2743460000
Type
FP PRO TOP3 24/20 2PIOL
GTIN (EAN)
4050118892130
Qty.
1 pc(s).
Depth
220 mm
Depth (inches)
8.661 inch
Height
196 mm
Height (inches)
7.717 inch
Width
196 mm
Width (inches)
7.717 inch
Net weight
4,256 g
Storage temperature
-10 °C...60 °C
Operating temperature
-25 °C...45 °C
Operating temperature range
-25 °C ... +45 °C (regard derating) Start up ≥ -40 °C
Humidity
35…85%, non condensing and non freezing
REACH SVHC
Lead 7439-92-1, Potassium perfluorobutane sulfonate 29420-49-3
SCIP
7645f3b1-6db9-495d-9e21-ab1d894aff05
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
6c, 7a, 7cI
AC current consumption
1,5 A @ 400 V DC / 2 A @ 320 V AC
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
DC input voltage range
450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC
45…65 Hz
Recommended back-up fuse
3 - 5 A, Char C
Surge protection
Varistor
Inrush current
Max. 10 A
Input fuse (internal)
5 A F (6.3 x 32 mm)
Adjustable rated current
No
Output current
20A
Output power
480 W
Output voltage
24 V
Output voltage type
DC
Output voltage, max.
28.8 V
Output voltage, min.
22.5 V
Output voltage, note
(adjustable via potentiometer)
Switch-on delay
1 s
Triggering characteristic
see characteristic curve
Rated output voltage
24 V DC ± 1 %
Nominal output current for Unom
20 A @ 60 °C
Humidity
35…85%, non condensing and non freezing
Installation advice
Lid screws included
Protection degree
IP65, in closed state, in complete state
Short-circuit protection
Yes, internal
Standards
UL 508
Surge voltage category
III, II
Surge voltage category
III, II
Connection system
IDC terminal
Connection data - contact element power bus
Wire connection method
Insulation displacement connection (IDC)
Blade size of operating tool
0.6 x 3.5 mm
Number of poles
5
Conductor connection cross-section, solid, max.
6 mm²
Conductor connection cross-section, solid, min.
1.5 mm²
Conductor connection cross-section, stranded, max.
6 mm²
Conductor connection cross-section, stranded, min.
2.5 mm²
Conductor connection cross-section, finely stranded, max.
6 mm²
Conductor connection cross-section, finely stranded, min.
2.5 mm²
Conductor connection cross-section, finest stranded, max.
6 mm²
Conductor connection cross-section, finest stranded, min.
2.5 mm²
Connection data - contact element Branch / Feed-in
Wire connection method
PUSH IN
Blade size of operating tool
0.6 x 3.5 mm
Stripping length
14 mm
Number of poles
5
Conductor connection cross-section, solid, max.
6 mm²
Conductor connection cross-section, solid, min.
0.5 mm²
Conductor connection cross-section, stranded, max.
6 mm²
Conductor connection cross-section, stranded, min.
0.5 mm²
Conductor connection cross-section, finely stranded, max.
10 mm²
Conductor connection cross-section, finely stranded, min.
0.5 mm²
Conductor connection cross-section, finest stranded, max.
6 mm²
Conductor connection cross-section, finest stranded, min.
0.5 mm²
Conductor connection cross-section with wire end ferrule
Type of wire end ferrule
12 mm with plastic collar
Standard
DIN 46228/1
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
12 mm with plastic collar
Standard
DIN 46228/4
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
8 mm with plastic collar
Standard
DIN 46228/1
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
8 mm with plastic collar
Standard
DIN 46228/4
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Type of wire end ferrule
Twin wire-end ferrules
Cross-section, min.
0.5 mm²
Cross-section, max.
6 mm²
Rated data acc. to IEC for contact element
Voltage type
AC, DC
Standard
IEC 60947-7-1, IEC 60947-7-2
Rated voltage
800 V
Rated impulse withstand voltage
8 kV
Rated current (3 loaded poles)
41 A
Rated current (4 loaded poles)
25 A
Rated data acc. to IEC for fuse plug
Voltage type
AC
Number of phases
3
Standard
IEC 61984, IEC 60947-7-3
Rated voltage
36 V
Rated impulse withstand voltage
6 kV
Rated current
12 A
Rated data acc. to IEC for plug-in connector
Voltage type
DC
Standard
IEC 60947-7-1, IEC 60947-7-2, IEC 61984
Rated voltage
690 V
Rated impulse withstand voltage
8 kV
Rated current (3 loaded poles)
32 A
Rated current (4 loaded poles)
25 A
Rated data acc. to UL for contact element
Standard
UL 1059
Note
for use with UL-listed TC-ER cables
Conductor connection cross-section, AWG, max.
AWG 10
Conductor connection cross-section, AWG, min.
AWG 14
Rated voltage
600 V
Rated current
30 A
Rated data acc. to UL for fuse plug
Rated data acc. to UL for plug-in connector
Standard
UL 1059
Note
for use with UL-listed TC-ER cables
Conductor connection cross-section, AWG, max.
AWG 12
Conductor connection cross-section, AWG, min.
AWG 16
Rated voltage
600 V
Rated current
20 A
Standards
UL 508
Approval/Certificate/Document of Conformity
Engineering Data
CADENAS eCATALOG
CAX data
Product Change Notification
User Documentation
Catalogues
Catalogues in PDF-format
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-90-02
ECLASS 14.0
27-04-07-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E258476
Order No.:
2743440000
Type:
FP PRO TOP3 24/10 2P
Version:
FieldPower® power supply unit, IP65, in complete state, 10A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded
Order No.:
2743450000
Type:
FP PRO TOP3 24/20 2P
Version:
FieldPower® power supply unit, IP65, in closed state, in complete state, 20A, 24 V, DC, IDC terminal, PUSH IN, M12, A-coded
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.