Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Network-compatible current measuring transducers ACT20C
intrinsically safe signal converter - ACT20X
signal converter and process monitoring - ACT20P
Space-saving signal converter - ACT20M
Signal converter in terminal block format - MCZ
Compact standard signal isolators - PicoPak
Process monitoring displays
Analogue-digital / digital-analogue converter
Signal - & serial interface converter– WAVESERIES
Configuration software
Accessories
Signal converters
Passive isolator
Signal splitter
Temperature transducer
Measuring and monitoring relay
Current measuring transducer
Bridge measuring transducer
Frequency converters
Universal
General ordering data
Version
Measuring bridge converter, Input : Resistance measuring bridge, Output : 0(4)-20 mA, 0-10 V
Order No.
2456820000
Type
ACT20P-BRIDGE-P
GTIN (EAN)
4050118471762
Qty.
1 pc(s).
Dimensions and weights
Depth
113.6 mm
Depth (inches)
4.472 inch
Height
127.1 mm
Height (inches)
5.004 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
205 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
Humidity
10…90 %, no condensation
Probability of failure
SIL in compliance with IEC 61508
None
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Input
Bridge sensitivity
1.0 mV / V to 5.0 mV / V
Bridge supply voltage
5 V or 10 V
Input signal
±10 mV / ±20 mV / ±30 mV / ±50 mV
Number of inputs
1
Sensor
Strain gauge resistance, Resistance measurement, Total resistance of all parallel resistance measuring bridges: min. 87 Ω
Sensor supply
120 mA @ 10 V (= 4 x 350 Ω bridge resistors)
Output
Load impedance current
≤ 600 Ω
Output current
0…22 mA (adjustable)
Output voltage, note
0…11 V (adjustable)
Type
active, connected control must be passive
load impedance voltage
600 Ω
Output (digital)
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
General data
Accuracy
<0.05 % of measuring range
Configuration
DIP switch and button
Linearity
Typically ± 0.05 % of signal range
Long-term drift
0.1 % / 10.000 h
Power consumption
3 W @ 24 V DC
Protection degree
IP20
Rail
TS 35
Step response time
<400 ms (10…90 %)
Temperature coefficient
typ. 0.005 % / °C
Voltage supply
10…60 V DC
Insulation coordination
EMC standards
EN 61326
Insulation voltage
5.7 kV (input / output, input / supply)
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Connection data
Type of connection
PUSH IN
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 14
Wire cross-section, solid, min.
0.2 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Important note
Product information
The ACT20P-BRIDGE-P bridge measuring transducer converts measuring bridge voltages into standard signals. Buttons are used for adjustment to the measuring bridge connected. The bridge measuring transducer can supply up to 4 parallel-connected measuring bridges each with 350 Ω. The device supports simple compensation of the tare weight with a separate input for an external button or an external PLC signal. The power supply is galvanically isolated from input and output (3-way isolation).T
Features
4-wire and 6-wire measurement
Supply of up to 4 parallel-connected measuring bridges each with 350 Ω
Input and output ranges can be adjusted via DIP switches
Tare compensation via external button or PLC signal
Front LED indicates operation status
3-way galvanic isolation between input, output and power supply
Classifications
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
ECLASS 14.0
27-21-01-20
Approvals
Approvals
Approvals
CULUS;
ROHS
Conform
Order No.:
1067250000
Type of connection:
Screw connection
Type:
ACT20P BRIDGE
Version:
Measuring bridge converter, Input : Resistance measuring bridge, Output : 0(4)-20 mA, 0-10 V
Version
Measuring bridge converter, Input : Resistance measuring bridge, Output : 0(4)-20 mA, 0-10 V
Order No.
2456820000
Type
ACT20P-BRIDGE-P
GTIN (EAN)
4050118471762
Qty.
1 pc(s).
Depth
113.6 mm
Depth (inches)
4.472 inch
Height
127.1 mm
Height (inches)
5.004 inch
Width
22.5 mm
Width (inches)
0.886 inch
Net weight
205 g
Storage temperature
-40 °C...85 °C
Operating temperature
-20 °C...60 °C
Humidity at operating temperature
0...95 % (no condensation)
Humidity
10…90 %, no condensation
SIL in compliance with IEC 61508
None
REACH SVHC
Lead 7439-92-1
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Bridge sensitivity
1.0 mV / V to 5.0 mV / V
Bridge supply voltage
5 V or 10 V
Input signal
±10 mV / ±20 mV / ±30 mV / ±50 mV
Number of inputs
1
Sensor
Strain gauge resistance, Resistance measurement, Total resistance of all parallel resistance measuring bridges: min. 87 Ω
Sensor supply
120 mA @ 10 V (= 4 x 350 Ω bridge resistors)
Load impedance current
≤ 600 Ω
Output current
0…22 mA (adjustable)
Output voltage, note
0…11 V (adjustable)
Type
active, connected control must be passive
load impedance voltage
600 Ω
Max. switching voltage, AC
0 V
Rated switching current
0.1 A
Accuracy
<0.05 % of measuring range
Configuration
DIP switch and button
Linearity
Typically ± 0.05 % of signal range
Long-term drift
0.1 % / 10.000 h
Power consumption
3 W @ 24 V DC
Protection degree
IP20
Rail
TS 35
Step response time
<400 ms (10…90 %)
Temperature coefficient
typ. 0.005 % / °C
Voltage supply
10…60 V DC
EMC standards
EN 61326
Insulation voltage
5.7 kV (input / output, input / supply)
Pollution severity
2
Rated voltage
300 V
Surge voltage category
III
Type of connection
PUSH IN
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 14
Wire cross-section, solid, min.
0.2 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Product information
The ACT20P-BRIDGE-P bridge measuring transducer converts measuring bridge voltages into standard signals. Buttons are used for adjustment to the measuring bridge connected. The bridge measuring transducer can supply up to 4 parallel-connected measuring bridges each with 350 Ω. The device supports simple compensation of the tare weight with a separate input for an external button or an external PLC signal. The power supply is galvanically isolated from input and output (3-way isolation).T
Features
4-wire and 6-wire measurement
Supply of up to 4 parallel-connected measuring bridges each with 350 Ω
Input and output ranges can be adjusted via DIP switches
Tare compensation via external button or PLC signal
Front LED indicates operation status
3-way galvanic isolation between input, output and power supply
ETIM 6.0
EC002653
ETIM 7.0
EC002653
ETIM 8.0
EC002653
ETIM 9.0
EC002653
ECLASS 9.0
27-21-01-20
ECLASS 9.1
27-21-01-20
ECLASS 10.0
27-21-01-20
ECLASS 11.0
27-21-01-20
ECLASS 12.0
27-21-01-20
ECLASS 13.0
27-21-01-20
ECLASS 14.0
27-21-01-20
Approvals
Approvals
CULUS;
ROHS
Conform
Order No.:
1067250000
Type of connection:
Screw connection
Type:
ACT20P BRIDGE
Version:
Measuring bridge converter, Input : Resistance measuring bridge, Output : 0(4)-20 mA, 0-10 V
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.