Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
OMNIMATE 4.0
OMNIMATE Data PCB connectors
PCB terminals - OMNIMATE Signal
PCB connectors - OMNIMATE Signal
PCB terminals - OMNIMATE Power
PCB connectors - OMNIMATE Power
Feedthrough terminals for devices - OMNIMATE Power
PCB circular connectors - IP67
Sample set - OMNIMATE
4 mm²
6 mm²
10 mm²
16 mm²
25 mm²
35 mm²
50 mm²
95 mm²
Accessories
Cable lug screw connection
Clamping yoke screw connection
WGK 25 VP
General ordering data
Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Order No.
2444720000
Type
WGK 25 VP/Z GN/YE BX
GTIN (EAN)
4050118480283
Qty.
50 pc(s).
Product data
IEC: 690 V / 101 A / 6 - 35 mm²
Packaging
Box
Dimensions and weights
Height
48.5 mm
Height (inches)
1.909 inch
Height of lowest version
48.5 mm
Width
19.7 mm
Width (inches)
0.776 inch
Length
19.66 mm
Length (inches)
0.774 inch
Net weight
47.96 g
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
System parameters
Product family
OMNIMATE Power - series WGK
Wire connection method
Cable lug: ring cable / spade lug
Conductor outlet direction
180°
Number of poles
1
Pin series quantity
1
Fitted by customer
Yes
Screwdriver blade
1.2 x 6.5
Tightening torque, min.
4 Nm
Tightening torque, max.
4.5 Nm
Clamping screw
M 6
Stripping length
18 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20
Protection degree
IP20
Type of connection 1
Clamping yoke
Type of connection 2
Screw connection
Material data
Insulating material
Wemid (PA)
Colour
Green/yellow
Colour chart (similar)
Not specified
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
tinned
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C
Conductors suitable for connection
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire connection cross section AWG, min.
AWG 10
Wire connection cross section AWG, max.
AWG 3
Solid, min. H05(07) V-U
6 mm²
Solid, max. H05(07) V-U
16 mm²
Stranded, min. H07V-R
10 mm²
Stranded, max. H07V-R
35 mm²
Flexible, min. H05(07) V-K
10 mm²
Flexible, max. H05(07) V-K
25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
25 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
4 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
25 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
4 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H4,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
6 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H6,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
10 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H10,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
25 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H25,0/18
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1
Rated current, min. number of poles (Tu=20°C)
101 A
Rated current, max. number of poles (Tu=20°C)
101 A
Rated voltage for surge voltage class / pollution degree III/3
690 V
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV
Rated data acc. to CSA
Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
100 A
Rated current (Use group C / CSA)
100 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 10
Wire cross-section, AWG, max.
AWG 3
Rated data acc. to UL 1059
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
100 A
Rated current (Use group C / UL 1059)
100 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 10
Wire cross-section, AWG, max.
AWG 3
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packing
Packaging
Box
VPE length
336 mm
VPE width
173 mm
VPE height
77 mm
Important note
Notes
Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Colours: SW = black; GN/YL = green/yellow; GY = grey Additional variants on request WGK: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V WGKV: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V WGK…VP: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 2.5 mm = 800 V; metal walls: 2.5 - 4 mm = 690 V; metal walls: 4 - 6 mm = 500 V Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
Classifications
ETIM 6.0
EC001283
ETIM 7.0
EC001283
ETIM 8.0
EC001283
ETIM 9.0
EC001283
ECLASS 9.0
27-14-11-34
ECLASS 9.1
27-14-11-34
ECLASS 10.0
27-14-11-34
ECLASS 11.0
27-14-11-34
ECLASS 12.0
27-14-11-34
ECLASS 13.0
27-14-11-34
ECLASS 14.0
27-14-11-34
Approvals
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Show all
Green/yellow
black
grey
Number of poles:
1
Order No.:
2444800000
Colour:
black
Type:
WGK 25 VP BK BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444700000
Colour:
Green/yellow
Type:
WGK 25 VP GN/YE BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444710000
Colour:
grey
Type:
WGK 25 VP GY BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444790000
Colour:
black
Type:
WGK 25 VP/Z BK BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444730000
Colour:
grey
Type:
WGK 25 VP/Z GY BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Order No.
2444720000
Type
WGK 25 VP/Z GN/YE BX
GTIN (EAN)
4050118480283
Qty.
50 pc(s).
Product data
IEC: 690 V / 101 A / 6 - 35 mm²
Packaging
Box
Height
48.5 mm
Height (inches)
1.909 inch
Height of lowest version
48.5 mm
Width
19.7 mm
Width (inches)
0.776 inch
Length
19.66 mm
Length (inches)
0.774 inch
Net weight
47.96 g
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Product family
OMNIMATE Power - series WGK
Wire connection method
Cable lug: ring cable / spade lug
Conductor outlet direction
180°
Number of poles
1
Pin series quantity
1
Fitted by customer
Yes
Screwdriver blade
1.2 x 6.5
Tightening torque, min.
4 Nm
Tightening torque, max.
4.5 Nm
Clamping screw
M 6
Stripping length
18 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20
Protection degree
IP20
Type of connection 1
Clamping yoke
Type of connection 2
Screw connection
Insulating material
Wemid (PA)
Colour
Green/yellow
Colour chart (similar)
Not specified
UL 94 flammability rating
V-0
Contact material
Cu-alloy
Contact surface
tinned
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire connection cross section AWG, min.
AWG 10
Wire connection cross section AWG, max.
AWG 3
Solid, min. H05(07) V-U
6 mm²
Solid, max. H05(07) V-U
16 mm²
Stranded, min. H07V-R
10 mm²
Stranded, max. H07V-R
35 mm²
Flexible, min. H05(07) V-K
10 mm²
Flexible, max. H05(07) V-K
25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
25 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
4 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
25 mm²
Clampable conductor
Cross-section for conductor connection
Type
fine-wired
nominal
4 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H4,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
6 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H6,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
10 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H10,0/18
Cross-section for conductor connection
Type
fine-wired
nominal
25 mm²
wire end ferrule
Stripping length
Recommended wire-end ferrule
H25,0/18
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)
tested acc. to standard
IEC 60664-1
Rated current, min. number of poles (Tu=20°C)
101 A
Rated current, max. number of poles (Tu=20°C)
101 A
Rated voltage for surge voltage class / pollution degree III/3
690 V
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV
Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
100 A
Rated current (Use group C / CSA)
100 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 10
Wire cross-section, AWG, max.
AWG 3
Institute (cURus)
Certificate No. (cURus)
E60693
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
100 A
Rated current (Use group C / UL 1059)
100 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 10
Wire cross-section, AWG, max.
AWG 3
Reference to approval values
Specifications are maximum values, details - see approval certificate.
Packaging
Box
VPE length
336 mm
VPE width
173 mm
VPE height
77 mm
Notes
Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Colours: SW = black; GN/YL = green/yellow; GY = grey Additional variants on request WGK: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V WGKV: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V WGK…VP: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 2.5 mm = 800 V; metal walls: 2.5 - 4 mm = 690 V; metal walls: 4 - 6 mm = 500 V Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
ETIM 6.0
EC001283
ETIM 7.0
EC001283
ETIM 8.0
EC001283
ETIM 9.0
EC001283
ECLASS 9.0
27-14-11-34
ECLASS 9.1
27-14-11-34
ECLASS 10.0
27-14-11-34
ECLASS 11.0
27-14-11-34
ECLASS 12.0
27-14-11-34
ECLASS 13.0
27-14-11-34
ECLASS 14.0
27-14-11-34
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Show all
Green/yellow
black
grey
Number of poles:
1
Order No.:
2444800000
Colour:
black
Type:
WGK 25 VP BK BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444700000
Colour:
Green/yellow
Type:
WGK 25 VP GN/YE BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444710000
Colour:
grey
Type:
WGK 25 VP GY BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444790000
Colour:
black
Type:
WGK 25 VP/Z BK BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Number of poles:
1
Order No.:
2444730000
Colour:
grey
Type:
WGK 25 VP/Z GY BX
Version:
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);)
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);){kind=link}
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);){kind=link}
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);){kind=link}
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);){kind=link}
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',true,5);){kind=link}
, Direct mounting, Feed-through (bushing)',1,'50.0',1,'12507500009999.jpg',false,0);){kind=link}