Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Potential equalisation terminal block
Shield clamping saddle
Accessories
Earth-wire disconnect terminal blocks
Feed-through terminal blocks for functional earth
Protective earth terminal block for functional earth
Please select ...
General ordering data
Version
Feed-through terminal block, Screw connection, 35 mm², 1000 V, 125 A, Number of connections: 2
Order No.
2000060000
Type
WDU 35 GE/SW
GTIN (EAN)
4050118444544
Qty.
40 pc(s).
Dimensions and weights
Depth
62.5 mm
Depth (inches)
2.461 inch
Depth including DIN rail
63 mm
Height
60 mm
Height (inches)
2.362 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
51.38 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Environmental Product Compliance
REACH SVHC
/
Material data
Material
Wemid
Colour
black/yellow
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO14ATEX1338U
Certificate No. (IECEX)
IECEXULD14.0005U
Max. voltage (ATEX)
690 V
Current (ATEX)
115 A
Wire cross section max. (ATEX)
35 mm²
Max. voltage (IECEX)
690 V
Current (IECEX)
115 A
Wire cross section max. (IECEX)
35 mm²
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Screw connection, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
Yes
Additional technical data
Explosion-tested version
Yes
Open sides
right
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
6.5 x 1.2 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
2.5 mm²
max.
16 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
2.5 mm²
max.
50 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
2.5 mm²
max.
35 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Clamping range, max.
50 mm²
Clamping range, min.
2.5 mm²
Clamping screw
M 6
Connection cross-section, stranded, max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B8, B9
Number of connections
2
Stripping length
18 mm
Tightening torque, max.
5 Nm
Tightening torque, min.
4 Nm
Twin wire-end ferrules, max.
16 mm²
Twin wire-end ferrules, min.
1.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
General
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Rating data
Rated cross-section
35 mm²
Rated voltage
1,000 V
Rated DC voltage
1,000 V
Rated current
125 A
Current at maximum wires
150 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
Surge voltage category
III
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
2000090000
Type:
WDU 35N GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 500 V, 125 A, Number of connections: 2
Order No.:
2000080000
Type:
WDU 50N GE/SW
Version:
Feed-through terminal block, Screw connection, 50 mm², 1000 V, 150 A, Number of connections: 2
Order No.:
2000100000
Type:
WDU 70N/35 GE/SW
Version:
Feed-through terminal block, Screw connection, 70 mm², 1000 V, 192 A, Number of connections: 2
Order No.:
2000040000
Type:
WDU 16 GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 1000 V, 76 A, Number of connections: 2
Order No.:
2000050000
Type:
WDU 16N GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 690 V, 76 A, Number of connections: 2
Order No.:
2429520000
Type:
WDU 2.5 GE/SW
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 800 V, 24 A, Number of connections: 2
Order No.:
1020190000
Type:
WDU 4 GE/SW
Version:
Feed-through terminal block, Screw connection, 4 mm², 800 V, 32 A, Number of connections: 2
Order No.:
2000110000
Type:
WDU 95N/120N GE/SW
Version:
Feed-through terminal block, Screw connection, 120 mm², 1000 V, 269 A, Number of connections: 2
Version
Feed-through terminal block, Screw connection, 35 mm², 1000 V, 125 A, Number of connections: 2
Order No.
2000060000
Type
WDU 35 GE/SW
GTIN (EAN)
4050118444544
Qty.
40 pc(s).
Depth
62.5 mm
Depth (inches)
2.461 inch
Depth including DIN rail
63 mm
Height
60 mm
Height (inches)
2.362 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
51.38 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Material
Wemid
Colour
black/yellow
UL 94 flammability rating
V-0
Certificate No. (ATEX)
DEMKO14ATEX1338U
Certificate No. (IECEX)
IECEXULD14.0005U
Max. voltage (ATEX)
690 V
Current (ATEX)
115 A
Wire cross section max. (ATEX)
35 mm²
Max. voltage (IECEX)
690 V
Current (IECEX)
115 A
Wire cross section max. (IECEX)
35 mm²
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Screw connection, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
Yes
Explosion-tested version
Yes
Open sides
right
Type of mounting
Snap-on
Connection type, additional connection
Screw connection
Blade size
6.5 x 1.2 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
2.5 mm²
max.
16 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
2.5 mm²
max.
50 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
2.5 mm²
max.
35 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Clamping range, max.
50 mm²
Clamping range, min.
2.5 mm²
Clamping screw
M 6
Connection cross-section, stranded, max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B8, B9
Number of connections
2
Stripping length
18 mm
Tightening torque, max.
5 Nm
Tightening torque, min.
4 Nm
Twin wire-end ferrules, max.
16 mm²
Twin wire-end ferrules, min.
1.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Rated cross-section
35 mm²
Rated voltage
1,000 V
Rated DC voltage
1,000 V
Rated current
125 A
Current at maximum wires
150 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
Surge voltage category
III
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
Order No.:
2000090000
Type:
WDU 35N GE/SW
Version:
Feed-through terminal block, Screw connection, 35 mm², 500 V, 125 A, Number of connections: 2
Order No.:
2000080000
Type:
WDU 50N GE/SW
Version:
Feed-through terminal block, Screw connection, 50 mm², 1000 V, 150 A, Number of connections: 2
Order No.:
2000100000
Type:
WDU 70N/35 GE/SW
Version:
Feed-through terminal block, Screw connection, 70 mm², 1000 V, 192 A, Number of connections: 2
Order No.:
2000040000
Type:
WDU 16 GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 1000 V, 76 A, Number of connections: 2
Order No.:
2000050000
Type:
WDU 16N GE/SW
Version:
Feed-through terminal block, Screw connection, 16 mm², 690 V, 76 A, Number of connections: 2
Order No.:
2429520000
Type:
WDU 2.5 GE/SW
Version:
Feed-through terminal block, Screw connection, 2.5 mm², 800 V, 24 A, Number of connections: 2
Order No.:
1020190000
Type:
WDU 4 GE/SW
Version:
Feed-through terminal block, Screw connection, 4 mm², 800 V, 32 A, Number of connections: 2
Order No.:
2000110000
Type:
WDU 95N/120N GE/SW
Version:
Feed-through terminal block, Screw connection, 120 mm², 1000 V, 269 A, Number of connections: 2
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.