Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Accessories
2-tier
3-tier
1.5 mm²
General ordering data
Version
Initiator/actuator terminal, PUSH IN, 1.5 mm², 250 V, 13.5 A, dark beige
Order No.
1992220000
Type
AIO23 1.5 2SI
GTIN (EAN)
4050118377538
Qty.
100 pc(s).
Dimensions and weights
Depth
49.5 mm
Depth (inches)
1.949 inch
Depth including DIN rail
50.5 mm
Height
110 mm
Height (inches)
4.331 inch
Width
3.5 mm
Width (inches)
0.138 inch
Net weight
5.582 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Wemid
Colour
dark beige
Colour of operational elements
blue, red, white
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
TUEV17ATEX8031U
Certificate No. (IECEX)
IECEXTUR17.0016U
Max. voltage (ATEX)
220 V
Current (ATEX)
12 A
Wire cross section max. (ATEX)
1.5 mm²
Max. voltage (IECEX)
220 V
Current (IECEX)
12 A
Wire cross section max. (IECEX)
1.5 mm²
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
End cover plate required
Yes
Number of potentials
4
Number of levels
3
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
Yes
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
Yes
Installation advice
Rail
Open sides
right
Snap-on
No
Type of fixing
Snap-on
Type of mounting
TS 35
With snap-in pegs
No
CSA rating data
Certificate No. (CSA)
200039-70089609
Current size D (CSA)
13 A
Voltage size D (CSA)
150 V
Wire cross section max. (CSA)
14 AWG
Wire cross section min. (CSA)
26 AWG
Conductors for clamping (rated connection)
Blade size
0.4 x 2.0 mm
Clamping range, max.
1.5 mm²
Clamping range, min.
0.14 mm²
Connection cross-section, stranded, max.
1.5 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A1
Number of connections
6
Stripping length
8 mm
Tube length for wire-end ferrule with plastic collar DIN 46228/4
Tube length
Cross-section for conductor connection
min.
0.14 mm²
max.
0.75 mm²
Tube length for wire-end ferrule without plastic collar DIN 46228/1
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Type of connection
PUSH IN
Type of connection 2
PUSH IN
Wire connection cross section AWG, max.
AWG 14
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
1.5 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Installation advice
Rail
Rail
TS 35
Standards
In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 14
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
1.5 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
13.5 A
Current at maximum wires
13.5 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.83 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.56 W
Pollution severity
3
Surge voltage category
III
UL rating data
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
14 AWG
Conductor size Factory wiring min. (cURus)
26 AWG
Conductor size Field wiring max. (cURus)
14 AWG
Conductor size Field wiring min. (cURus)
26 AWG
Current size D (cURus)
13 A
Voltage size D (cURus)
150 V
Important note
Product information
For the wire end ferrules H1/10 and H1.5/10 a stripping length of 10 mm is to apply.
Classifications
ETIM 6.0
EC000900
ETIM 7.0
EC000900
ETIM 8.0
EC000900
ETIM 9.0
EC000900
ECLASS 9.0
27-14-11-28
ECLASS 9.1
27-14-11-28
ECLASS 10.0
27-14-11-28
ECLASS 11.0
27-14-11-28
ECLASS 12.0
27-14-11-28
ECLASS 13.0
27-25-01-12
ECLASS 14.0
27-25-01-12
Order No.:
2579620000
Type:
AIO23 1.5 2SI OR
Version:
Initiator/actuator terminal, PUSH IN, 1.5 mm², 250 V, 13.5 A, orange
Version
Initiator/actuator terminal, PUSH IN, 1.5 mm², 250 V, 13.5 A, dark beige
Order No.
1992220000
Type
AIO23 1.5 2SI
GTIN (EAN)
4050118377538
Qty.
100 pc(s).
Depth
49.5 mm
Depth (inches)
1.949 inch
Depth including DIN rail
50.5 mm
Height
110 mm
Height (inches)
4.331 inch
Width
3.5 mm
Width (inches)
0.138 inch
Net weight
5.582 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
Wemid
Colour
dark beige
Colour of operational elements
blue, red, white
UL 94 flammability rating
V-0
Certificate No. (ATEX)
TUEV17ATEX8031U
Certificate No. (IECEX)
IECEXTUR17.0016U
Max. voltage (ATEX)
220 V
Current (ATEX)
12 A
Wire cross section max. (ATEX)
1.5 mm²
Max. voltage (IECEX)
220 V
Current (IECEX)
12 A
Wire cross section max. (IECEX)
1.5 mm²
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
End cover plate required
Yes
Number of potentials
4
Number of levels
3
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
Yes
PE function
No
PEN function
No
Explosion-tested version
Yes
Installation advice
Rail
Open sides
right
Snap-on
No
Type of fixing
Snap-on
Type of mounting
TS 35
With snap-in pegs
No
Certificate No. (CSA)
200039-70089609
Current size D (CSA)
13 A
Voltage size D (CSA)
150 V
Wire cross section max. (CSA)
14 AWG
Wire cross section min. (CSA)
26 AWG
Blade size
0.4 x 2.0 mm
Clamping range, max.
1.5 mm²
Clamping range, min.
0.14 mm²
Connection cross-section, stranded, max.
1.5 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A1
Number of connections
6
Stripping length
8 mm
Tube length for wire-end ferrule with plastic collar DIN 46228/4
Tube length
Cross-section for conductor connection
min.
0.14 mm²
max.
0.75 mm²
Tube length for wire-end ferrule without plastic collar DIN 46228/1
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Cross-section for conductor connection
Tube length
Type of connection
PUSH IN
Type of connection 2
PUSH IN
Wire connection cross section AWG, max.
AWG 14
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
1.5 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
1.5 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Installation advice
Rail
Rail
TS 35
Standards
In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 14
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
1.5 mm²
Rated voltage
250 V
Rated DC voltage
250 V
Rated current
13.5 A
Current at maximum wires
13.5 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1.83 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.56 W
Pollution severity
3
Surge voltage category
III
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
14 AWG
Conductor size Factory wiring min. (cURus)
26 AWG
Conductor size Field wiring max. (cURus)
14 AWG
Conductor size Field wiring min. (cURus)
26 AWG
Current size D (cURus)
13 A
Voltage size D (cURus)
150 V
Product information
For the wire end ferrules H1/10 and H1.5/10 a stripping length of 10 mm is to apply.
ETIM 6.0
EC000900
ETIM 7.0
EC000900
ETIM 8.0
EC000900
ETIM 9.0
EC000900
ECLASS 9.0
27-14-11-28
ECLASS 9.1
27-14-11-28
ECLASS 10.0
27-14-11-28
ECLASS 11.0
27-14-11-28
ECLASS 12.0
27-14-11-28
ECLASS 13.0
27-25-01-12
ECLASS 14.0
27-25-01-12
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Order No.:
2579620000
Type:
AIO23 1.5 2SI OR
Version:
Initiator/actuator terminal, PUSH IN, 1.5 mm², 250 V, 13.5 A, orange
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}