Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
Z-Series
Standard
Roof
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Modular terminal blocks with electronic components
1-tier
2.5 mm²
6 mm²
5x20 fuse
5x25 fuse
General ordering data
Version
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.
1879730000
Type
ZSI 2.5-2/2X2AN/G20/LD4
GTIN (EAN)
4032248496778
Qty.
20 pc(s).
Dimensions and weights
Depth
55 mm
Depth (inches)
2.165 inch
Depth including DIN rail
55.5 mm
Height
68 mm
Height (inches)
2.677 inch
Width
12.2 mm
Width (inches)
0.48 inch
Net weight
25.17 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Material data
Material
Wemid
Colour
black
UL 94 flammability rating
V-0
System specifications
Version
Tension-clamp connection, Fuse cartridge, with LED, for plug-in cross-connector, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Additional technical data
Installation advice
Direct mounting
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Conductors for clamping (additional connection)
Blade size, additional connection
0.6 x 3.5 mm
Clamping range, further connection, max.
4 mm²
Clamping range, further connection, min.
0.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.
0.5 mm²
Conductor cross-section, flexible, further connection, min.
0.5 mm²
Connection direction
Inclined / angled
Connection type, additional connection
Tension-clamp connection
Cross-section for connected wire, AWG, additional connection, max.
AWG 12
Cross-section for connected wire, AWG, additional connection, min.
AWG 26
Cross-section for connected wire, flexible, further connection, max.
4 mm²
Cross-section for connected wire, solid-core, further connection, max.
4 mm²
Cross-section for connected wire, solid-core, further connection, min.
0.5 mm²
Number of connections, additional connection
2
Rated cross-section, further connection
2.5 mm²
Stripping length , additional connection
10 mm
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Type of connection
Tension-clamp connection
Type of connection 2
Tension-clamp connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Dimensions
TS 35 offset
39 mm
Display element
Type of voltage for indicator
AC/DC
Fuse terminals
Cartridge fuse
G-Si. 5 x 20
Display
Neon lamp
Fuse holder (cartridge holder)
for screw fixing
Operating voltage, max.
250 V
Power loss for overload and short-circuit protection for a composite arrangement
1.6 W at 6.3 A @ 41°C
Power loss for overload and short-circuit protection for an individual arrangement
2.5 W at 6.3 A @ 39°C
Type of voltage for indicator
AC/DC
General
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-3
Rating data
Rated cross-section
2.5 mm²
Rated voltage
250 V
Rated voltage to adjoining terminal
500 V
Rated DC voltage
250 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 60947-7-3
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
UL rating data
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
12 AWG
Conductor size Factory wiring min. (cURus)
26 AWG
Conductor size Field wiring max. (cURus)
12 AWG
Conductor size Field wiring min. (cURus)
26 AWG
Current size C (cURus)
10 A
Current size D (cURus)
5 A
Voltage size C (cURus)
300 V
Voltage size D (cURus)
600 V
Important note
Product information
The voltage depends on the selected fuse element or the selected indicator light
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Order No.:
1826050000
Type:
ZSI 2.5-2/2X2AN/G20
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.:
1867440000
Type:
ZSI 2.5-2/2X2AN/G20/LD1
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.:
1867420000
Type:
ZSI 2.5-2/2X2AN/G20/LD3
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Version
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.
1879730000
Type
ZSI 2.5-2/2X2AN/G20/LD4
GTIN (EAN)
4032248496778
Qty.
20 pc(s).
Depth
55 mm
Depth (inches)
2.165 inch
Depth including DIN rail
55.5 mm
Height
68 mm
Height (inches)
2.677 inch
Width
12.2 mm
Width (inches)
0.48 inch
Net weight
25.17 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Material
Wemid
Colour
black
UL 94 flammability rating
V-0
Version
Tension-clamp connection, Fuse cartridge, with LED, for plug-in cross-connector, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Installation advice
Direct mounting
Type of mounting
Snap-on
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Blade size, additional connection
0.6 x 3.5 mm
Clamping range, further connection, max.
4 mm²
Clamping range, further connection, min.
0.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.
0.5 mm²
Conductor cross-section, flexible, further connection, min.
0.5 mm²
Connection direction
Inclined / angled
Connection type, additional connection
Tension-clamp connection
Cross-section for connected wire, AWG, additional connection, max.
AWG 12
Cross-section for connected wire, AWG, additional connection, min.
AWG 26
Cross-section for connected wire, flexible, further connection, max.
4 mm²
Cross-section for connected wire, solid-core, further connection, max.
4 mm²
Cross-section for connected wire, solid-core, further connection, min.
0.5 mm²
Number of connections, additional connection
2
Rated cross-section, further connection
2.5 mm²
Stripping length , additional connection
10 mm
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Connection direction
Inclined / angled
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Type of connection
Tension-clamp connection
Type of connection 2
Tension-clamp connection
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Type of voltage for indicator
AC/DC
Cartridge fuse
G-Si. 5 x 20
Display
Neon lamp
Fuse holder (cartridge holder)
for screw fixing
Operating voltage, max.
250 V
Power loss for overload and short-circuit protection for a composite arrangement
1.6 W at 6.3 A @ 41°C
Power loss for overload and short-circuit protection for an individual arrangement
2.5 W at 6.3 A @ 39°C
Type of voltage for indicator
AC/DC
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-3
Rated cross-section
2.5 mm²
Rated voltage
250 V
Rated voltage to adjoining terminal
500 V
Rated DC voltage
250 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 60947-7-3
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
4 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
12 AWG
Conductor size Factory wiring min. (cURus)
26 AWG
Conductor size Field wiring max. (cURus)
12 AWG
Conductor size Field wiring min. (cURus)
26 AWG
Current size C (cURus)
10 A
Current size D (cURus)
5 A
Voltage size C (cURus)
300 V
Voltage size D (cURus)
600 V
Product information
The voltage depends on the selected fuse element or the selected indicator light
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Order No.:
1826050000
Type:
ZSI 2.5-2/2X2AN/G20
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.:
1867440000
Type:
ZSI 2.5-2/2X2AN/G20/LD1
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
Order No.:
1867420000
Type:
ZSI 2.5-2/2X2AN/G20/LD3
Version:
Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension-clamp connection, black, Direct mounting
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.