Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Accessories
Aluminium feed-in terminal blocks
Feed-through terminal blocks
Modular PE terminal blocks
35 mm²
50 mm²
120/150 mm²
70/95 mm²
95/120 mm²
70 mm²
General ordering data
Version
PE terminal, Screw connection, Green/yellow, 95 mm², 1000 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid
Order No.
1846030000
Type
WPE 95N/120N
GTIN (EAN)
4032248394531
Qty.
5 pc(s).
Dimensions and weights
Depth
90 mm
Depth (inches)
3.543 inch
Depth including DIN rail
91 mm
Height
91 mm
Height (inches)
3.583 inch
Width
27 mm
Width (inches)
1.063 inch
Net weight
281.96 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO14ATEX1338U
Certificate No. (IECEX)
IECEXULD14.0005U
Wire cross section max. (ATEX)
120 mm²
Wire cross section max. (IECEX)
120 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Screw connection, With PE connection, in closed state
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
N-function
No
PE function
Yes
PEN function
Yes
Additional technical data
Explosion-tested version
Yes
Installation advice
when screwed in
Interlock
for screw fixing
Number of similar terminals
1
Open sides
closed
Type of mounting
when screwed in
CSA rating data
Certificate No. (CSA)
200039-1057876
Wire cross section max. (CSA)
0000 AWG
Wire cross section min. (CSA)
4 AWG
Conductors for clamping (additional connection)
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
S6 (DIN 6911)
Clamping range, max.
150 mm²
Clamping range, min.
16 mm²
Clamping screw
M 10
Connection cross-section, stranded, max.
150 mm²
Connection cross-section, stranded, min.
16 mm²
Connection direction
on side
Gauge to IEC 60947-1
B13
Number of connections
2
Stripping length
27 mm
Tightening torque, max.
20 Nm
Tightening torque, min.
16 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
kcmil 250
Wire connection cross section AWG, min.
AWG 4
Wire connection cross section, finely stranded, max.
120 mm²
Wire connection cross section, finely stranded, min.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
95 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
16 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
16 mm²
General
Installation advice
when screwed in
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
kcmil 250
Wire connection cross section AWG, min.
AWG 4
PE rating data
Rated short-time current
11400 A (95 mm²)
Centre screw on PE terminals
M 5
Tightening torque range for fixing screw
3.0...4.0 Nm
PEN function
Yes
Rating data
Rated cross-section
95 mm²
Rated voltage to adjoining terminal
1,000 V
Rated DC voltage
1,000 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.14 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
7.42 W
Pollution severity
3
UL rating data
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
000 AWG
Conductor size Factory wiring min. (cURus)
4 AWG
Conductor size Field wiring max. (cURus)
000 AWG
Conductor size Field wiring min. (cURus)
4 AWG
Classifications
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
There are no products in this group.
Version
PE terminal, Screw connection, Green/yellow, 95 mm², 1000 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid
Order No.
1846030000
Type
WPE 95N/120N
GTIN (EAN)
4032248394531
Qty.
5 pc(s).
Depth
90 mm
Depth (inches)
3.543 inch
Depth including DIN rail
91 mm
Height
91 mm
Height (inches)
3.583 inch
Width
27 mm
Width (inches)
1.063 inch
Net weight
281.96 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-60 °C
Continuous operating temp., max.
130 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Certificate No. (ATEX)
DEMKO14ATEX1338U
Certificate No. (IECEX)
IECEXULD14.0005U
Wire cross section max. (ATEX)
120 mm²
Wire cross section max. (IECEX)
120 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Screw connection, With PE connection, in closed state
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
N-function
No
PE function
Yes
PEN function
Yes
Explosion-tested version
Yes
Installation advice
when screwed in
Interlock
for screw fixing
Number of similar terminals
1
Open sides
closed
Type of mounting
when screwed in
Certificate No. (CSA)
200039-1057876
Wire cross section max. (CSA)
0000 AWG
Wire cross section min. (CSA)
4 AWG
Connection type, additional connection
Screw connection
Blade size
S6 (DIN 6911)
Clamping range, max.
150 mm²
Clamping range, min.
16 mm²
Clamping screw
M 10
Connection cross-section, stranded, max.
150 mm²
Connection cross-section, stranded, min.
16 mm²
Connection direction
on side
Gauge to IEC 60947-1
B13
Number of connections
2
Stripping length
27 mm
Tightening torque, max.
20 Nm
Tightening torque, min.
16 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
kcmil 250
Wire connection cross section AWG, min.
AWG 4
Wire connection cross section, finely stranded, max.
120 mm²
Wire connection cross section, finely stranded, min.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
95 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
16 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
16 mm²
Installation advice
when screwed in
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
kcmil 250
Wire connection cross section AWG, min.
AWG 4
Rated short-time current
11400 A (95 mm²)
Centre screw on PE terminals
M 5
Tightening torque range for fixing screw
3.0...4.0 Nm
PEN function
Yes
Rated cross-section
95 mm²
Rated voltage to adjoining terminal
1,000 V
Rated DC voltage
1,000 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.14 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
7.42 W
Pollution severity
3
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
000 AWG
Conductor size Factory wiring min. (cURus)
4 AWG
Conductor size Field wiring max. (cURus)
000 AWG
Conductor size Field wiring min. (cURus)
4 AWG
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Certificate No. (cURusEX)
E184763
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
