Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
Standard
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Pluggable terminal blocks
Modular terminal blocks with electronic components
terminal blocks with spring-loaded cable clamp
terminal blocks with miscellaneous connection
1-tier
2-tier
2.5 mm²
4 mm²
6 mm²
10 mm²
25 mm²
5x20 fuse
General ordering data
Version
Fuse terminal, Screw connection, dark beige, 2.5 mm², 6.3 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid, G-Si. 5 x 20
Order No.
1763940000
Type
WTR 2.5/SI
GTIN (EAN)
4032248107735
Qty.
25 pc(s).
Dimensions and weights
Depth
97 mm
Depth (inches)
3.819 inch
Depth including DIN rail
97.5 mm
Height
60 mm
Height (inches)
2.362 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
14.72 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
System specifications
Version
Screw connection, Fuse isolator, for plug-in cross-connector, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
1.5 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
0.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Additional technical data
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
154685-1152890
Current size D (CSA)
10 A
Voltage size D (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Clamping range, max.
4 mm²
Clamping range, min.
0.05 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Fuse terminals
Cartridge fuse
G-Si. 5 x 20
Display
Without LED
Fuse holder (cartridge holder)
pluggable
Operating voltage, max.
400 V
General
Rail
TS 35
Standards
IEC 60947-7-3
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated voltage to adjoining terminal
400 V
Rated DC voltage
400 V
Rated current
6.3 A
Current at maximum wires
6.3 A
Standards
IEC 60947-7-3
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
22 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Important note
Product information
The voltage depends on the selected fuse element or the selected indicator light
Classifications
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Order No.:
1763950000
Type:
WTR 2.5/SI LD 36V
Version:
Fuse terminal, Screw connection, dark beige, 2.5 mm², 6.3 A, 36 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid, G-Si. 5 x 20
Version
Fuse terminal, Screw connection, dark beige, 2.5 mm², 6.3 A, 400 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid, G-Si. 5 x 20
Order No.
1763940000
Type
WTR 2.5/SI
GTIN (EAN)
4032248107735
Qty.
25 pc(s).
Depth
97 mm
Depth (inches)
3.819 inch
Depth including DIN rail
97.5 mm
Height
60 mm
Height (inches)
2.362 inch
Width
5.1 mm
Width (inches)
0.201 inch
Net weight
14.72 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Version
Screw connection, Fuse isolator, for plug-in cross-connector, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
1.5 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
0.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1.5 mm²
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
154685-1152890
Current size D (CSA)
10 A
Voltage size D (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Connection type, additional connection
Screw connection
Blade size
0.6 x 3.5 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
1.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
0.5 mm²
max.
4 mm²
nominal
2.5 mm²
wire end ferrule
Stripping length
min.
10 mm
max.
10 mm
nominal
10 mm
Tightening torque
Clamping range, max.
4 mm²
Clamping range, min.
0.05 mm²
Clamping screw
M 2.5
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
2
Stripping length
10 mm
Tightening torque, max.
0.8 Nm
Tightening torque, min.
0.4 Nm
Torque level with DMS electric screwdriver
1
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Cartridge fuse
G-Si. 5 x 20
Display
Without LED
Fuse holder (cartridge holder)
pluggable
Operating voltage, max.
400 V
Rail
TS 35
Standards
IEC 60947-7-3
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
2.5 mm²
Rated voltage
400 V
Rated voltage to adjoining terminal
400 V
Rated DC voltage
400 V
Rated current
6.3 A
Current at maximum wires
6.3 A
Standards
IEC 60947-7-3
Volume resistance according to IEC 60947-7-x
1.33 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
0.77 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
22 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Product information
The voltage depends on the selected fuse element or the selected indicator light
ETIM 6.0
EC000899
ETIM 7.0
EC000899
ETIM 8.0
EC000899
ETIM 9.0
EC000899
ECLASS 9.0
27-14-11-16
ECLASS 9.1
27-14-11-16
ECLASS 10.0
27-14-11-16
ECLASS 11.0
27-14-11-16
ECLASS 12.0
27-14-11-16
ECLASS 13.0
27-25-01-13
ECLASS 14.0
27-25-01-13
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
1763950000
Type:
WTR 2.5/SI LD 36V
Version:
Fuse terminal, Screw connection, dark beige, 2.5 mm², 6.3 A, 36 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid, G-Si. 5 x 20
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}