Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
Z-Series
Standard
Roof
Compact
Mini-modular terminal blocks for enclosure wiring
Feed-through terminal blocks
Modular PE terminal blocks
Fuse terminal blocks
Modular test-disconnect terminal blocks
Pluggable terminal blocks
Modular terminal blocks with electronic components
1-tier
2-tier
3-tier
1.5 mm²
10 mm²
16 mm²
2.5 mm²
35 mm²
4 mm²
6 mm²
General ordering data
Version
PE terminal, Tension-clamp connection, 16 mm², 1920 A (16 mm²), Green/yellow
Order No.
1745250000
Type
ZPE 16
GTIN (EAN)
4008190996789
Qty.
25 pc(s).
Dimensions and weights
Depth
50.5 mm
Depth (inches)
1.988 inch
Depth including DIN rail
51.5 mm
Height
82.5 mm
Height (inches)
3.248 inch
Width
12.1 mm
Width (inches)
0.476 inch
Net weight
48.672 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material data
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO15ATEX1467U
Certificate No. (IECEX)
IECEXULD15.0008U
Wire cross section max. (ATEX)
25 mm²
Wire cross section max. (IECEX)
25 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
PE function
Yes
PEN function
Yes
Additional technical data
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
4 AWG
Wire cross section min. (CSA)
14 AWG
Conductors for clamping (additional connection)
Connection type, additional connection
Tension-clamp connection
Conductors for clamping (rated connection)
Blade size
1.0 x 5.5 mm
Clamping range, max.
25 mm²
Clamping range, min.
1.5 mm²
Connection cross-section, stranded, max.
25 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A7
Number of connections
2
Stripping length
18 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 14
Wire connection cross section, finely stranded, max.
16 mm²
Wire connection cross section, finely stranded, min.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
1.5 mm²
General
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 14
PE rating data
Rated short-time current
1920 A (16 mm²)
PEN function
Yes
Rating data
Rated cross-section
16 mm²
Rated voltage to adjoining terminal
800 V
Rated DC voltage
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.42 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
2.43 W
Pollution severity
3
UL rating data
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
6 AWG
Conductor size Factory wiring min. (cURus)
14 AWG
Conductor size Field wiring max. (cURus)
6 AWG
Conductor size Field wiring min. (cURus)
14 AWG
Classifications
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Order No.:
1768310000
Type:
ZPE 16/3AN
Version:
PE terminal, Tension-clamp connection, 16 mm², 1920 A (16 mm²), Green/yellow
Version
PE terminal, Tension-clamp connection, 16 mm², 1920 A (16 mm²), Green/yellow
Order No.
1745250000
Type
ZPE 16
GTIN (EAN)
4008190996789
Qty.
25 pc(s).
Depth
50.5 mm
Depth (inches)
1.988 inch
Depth including DIN rail
51.5 mm
Height
82.5 mm
Height (inches)
3.248 inch
Width
12.1 mm
Width (inches)
0.476 inch
Net weight
48.672 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material
Wemid
Colour
Green/yellow
UL 94 flammability rating
V-0
Certificate No. (ATEX)
DEMKO15ATEX1467U
Certificate No. (IECEX)
IECEXULD15.0008U
Wire cross section max. (ATEX)
25 mm²
Wire cross section max. (IECEX)
25 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Tension-clamp connection, With PE connection, One end without connector
End cover plate required
Yes
Number of levels
1
Number of clamping points per level
2
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 35
PE function
Yes
PEN function
Yes
Explosion-tested version
No
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
4 AWG
Wire cross section min. (CSA)
14 AWG
Connection type, additional connection
Tension-clamp connection
Blade size
1.0 x 5.5 mm
Clamping range, max.
25 mm²
Clamping range, min.
1.5 mm²
Connection cross-section, stranded, max.
25 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A7
Number of connections
2
Stripping length
18 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 14
Wire connection cross section, finely stranded, max.
16 mm²
Wire connection cross section, finely stranded, min.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
1.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
16 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
1.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
1.5 mm²
Rail
TS 35
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 4
Wire connection cross section AWG, min.
AWG 14
Rated short-time current
1920 A (16 mm²)
PEN function
Yes
Rated cross-section
16 mm²
Rated voltage to adjoining terminal
800 V
Rated DC voltage
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.42 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
2.43 W
Pollution severity
3
Certificate No. (cURus)
E60693
Conductor size Factory wiring max. (cURus)
6 AWG
Conductor size Factory wiring min. (cURus)
14 AWG
Conductor size Field wiring max. (cURus)
6 AWG
Conductor size Field wiring min. (cURus)
14 AWG
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Certificate No. (cURusEX)
E184763
Order No.:
1768310000
Type:
ZPE 16/3AN
Version:
PE terminal, Tension-clamp connection, 16 mm², 1920 A (16 mm²), Green/yellow
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.