Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Accessories
Feed-through terminal blocks
Modular PE terminal blocks
35 mm²
General ordering data
Version
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, dark beige
Order No.
1739620000
Type
ZDU 35
GTIN (EAN)
4008190957070
Qty.
10 pc(s).
Dimensions and weights
Depth
58.5 mm
Depth (inches)
2.303 inch
Depth including DIN rail
59.5 mm
Height
100.5 mm
Height (inches)
3.957 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
82.009 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material data
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO15ATEX1467U
Certificate No. (IECEX)
IECEXULD15.0008U
Max. voltage (ATEX)
690 V
Current (ATEX)
110 A
Wire cross section max. (ATEX)
35 mm²
Max. voltage (IECEX)
690 V
Current (IECEX)
110 A
Wire cross section max. (IECEX)
35 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Tension-clamp connection, for plug-in cross-connector, in closed state
End cover plate required
No
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
Additional technical data
Explosion-tested version
Yes
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
200039-1152892
Current size B (CSA)
120 A
Current size C (CSA)
120 A
Current size D (CSA)
5 A
Voltage size B (CSA)
600 V
Voltage size C (CSA)
600 V
Voltage size D (CSA)
600 V
Wire cross section max. (CSA)
2 AWG
Wire cross section min. (CSA)
12 AWG
Conductors for clamping (additional connection)
Connection type, additional connection
Tension-clamp connection
Conductors for clamping (rated connection)
Blade size
1.0 x 5.5 mm
Clamping range, max.
35 mm²
Clamping range, min.
2.5 mm²
Connection cross-section, stranded, max.
35 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A8
Number of connections
2
Stripping length
25 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
General
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Rating data
Rated cross-section
35 mm²
Rated voltage
800 V
Rated DC voltage
800 V
Rated current
125 A
Current at maximum wires
125 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
UL rating data
Certificate No. (cURus)
E60693
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Order No.:
1739630000
Type:
ZDU 35 BL
Version:
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, blue
Order No.:
1830760000
Type:
ZDU 35 OR
Version:
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, orange
Version
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, dark beige
Order No.
1739620000
Type
ZDU 35
GTIN (EAN)
4008190957070
Qty.
10 pc(s).
Depth
58.5 mm
Depth (inches)
2.303 inch
Depth including DIN rail
59.5 mm
Height
100.5 mm
Height (inches)
3.957 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
82.009 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Certificate No. (ATEX)
DEMKO15ATEX1467U
Certificate No. (IECEX)
IECEXULD15.0008U
Max. voltage (ATEX)
690 V
Current (ATEX)
110 A
Wire cross section max. (ATEX)
35 mm²
Max. voltage (IECEX)
690 V
Current (IECEX)
110 A
Wire cross section max. (IECEX)
35 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Tension-clamp connection, for plug-in cross-connector, in closed state
End cover plate required
No
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
Explosion-tested version
Yes
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
Certificate No. (CSA)
200039-1152892
Current size B (CSA)
120 A
Current size C (CSA)
120 A
Current size D (CSA)
5 A
Voltage size B (CSA)
600 V
Voltage size C (CSA)
600 V
Voltage size D (CSA)
600 V
Wire cross section max. (CSA)
2 AWG
Wire cross section min. (CSA)
12 AWG
Connection type, additional connection
Tension-clamp connection
Blade size
1.0 x 5.5 mm
Clamping range, max.
35 mm²
Clamping range, min.
2.5 mm²
Connection cross-section, stranded, max.
35 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
top
Gauge to IEC 60947-1
A8
Number of connections
2
Stripping length
25 mm
Type of connection
Tension-clamp connection
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
Installation advice
Direct mounting
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 2
Wire connection cross section AWG, min.
AWG 12
Rated cross-section
35 mm²
Rated voltage
800 V
Rated DC voltage
800 V
Rated current
125 A
Current at maximum wires
125 A
Standards
IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
Certificate No. (cURus)
E60693
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (cURus)
E60693
Certificate No. (cURusEX)
E184763
Order No.:
1739630000
Type:
ZDU 35 BL
Version:
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, blue
Order No.:
1830760000
Type:
ZDU 35 OR
Version:
Feed-through terminal, Tension-clamp connection, 35 mm², 800 V, 125 A, orange
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.