Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
Power feed-in
Power distribution
Instrument transformer wiring
Control voltage distribution
Signal wiring
Signal marshalling
Shielding and earthing
Building installation wiring
Assortment case / L-BOXX
Pre-assembled installation terminal rails
PUSH IN technology
Clamping yoke technology
Accessories
Installation terminal blocks
Main line branch terminal blocks
Sub-distributor block
1-tier
multi-tier
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
35 mm²
70 mm²
General ordering data
Version
Neutral conductor modular terminal, Screw connection, Busbar connection, 35, 400 V, 125 A, TS 35, blue
Order No.
1718550000
Type
WNT 35N 10X3
GTIN (EAN)
4008190362430
Qty.
20 pc(s).
Dimensions and weights
Depth
50.5 mm
Depth (inches)
1.988 inch
Depth including DIN rail
51 mm
Height
66 mm
Height (inches)
2.598 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
63.9 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
REACH SVHC
/
Material data
Material
Wemid
Colour
blue
UL 94 flammability rating
V-0
System specifications
Version
Screw connection, with busbar connection 10x3, in closed state
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
1
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
Yes
PE function
No
PEN function
No
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Cross-section for connected wire, stranded, two clampable wires, max.
16 mm²
Cross-section for connected wire, stranded, two clampable wires, min.
16 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
16 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
4 mm²
Wire cross-section, finely stranded, two clampable wires, max.
16 mm²
Additional technical data
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
35 mm²
Conductors for clamping (rated connection)
Blade size
6.5 x 1.2 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
2.5 mm²
max.
16 mm²
nominal
16 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
2.5 mm²
max.
50 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
2.5 mm²
max.
35 mm²
nominal
235 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Clamping range, max.
50 mm²
Clamping range, min.
2.5 mm²
Clamping screw
M 6
Connection cross-section, stranded, max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B8
Number of connections
1
Stripping length
18 mm
Tightening torque, max.
5 Nm
Tightening torque, min.
4 Nm
Type of connection
Screw connection, Busbar connection
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
General
Installation advice
Busbar
Rail
TS 35
Standards
In accordance with IEC 60947-7-1
Rating data
Rated cross-section
35 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
125 A
Current at maximum wires
140 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-11
There are no products in this group.
Version
Neutral conductor modular terminal, Screw connection, Busbar connection, 35, 400 V, 125 A, TS 35, blue
Order No.
1718550000
Type
WNT 35N 10X3
GTIN (EAN)
4008190362430
Qty.
20 pc(s).
Depth
50.5 mm
Depth (inches)
1.988 inch
Depth including DIN rail
51 mm
Height
66 mm
Height (inches)
2.598 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
63.9 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Material
Wemid
Colour
blue
UL 94 flammability rating
V-0
Version
Screw connection, with busbar connection 10x3, in closed state
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
1
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
Yes
PE function
No
PEN function
No
Cross-section for connected wire, stranded, two clampable wires, max.
16 mm²
Cross-section for connected wire, stranded, two clampable wires, min.
16 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.
16 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
4 mm²
Wire cross-section, finely stranded, two clampable wires, max.
16 mm²
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
closed
Type of mounting
Snap-on
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
35 mm²
Blade size
6.5 x 1.2 mm
Clampable conductor
Connection specification
Screw connection
Cross-section for conductor connection
Type
solid, H05(07) V-U
min.
2.5 mm²
max.
16 mm²
nominal
16 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
stranded, H07V-R
min.
2.5 mm²
max.
50 mm²
nominal
35 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Connection specification
Screw connection
Cross-section for conductor connection
Type
flexible, H05(07) V-K
min.
2.5 mm²
max.
35 mm²
nominal
235 mm²
wire end ferrule
Stripping length
min.
18 mm
max.
18 mm
nominal
18 mm
Tightening torque
Clamping range, max.
50 mm²
Clamping range, min.
2.5 mm²
Clamping screw
M 6
Connection cross-section, stranded, max.
50 mm²
Connection cross-section, stranded, min.
2.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B8
Number of connections
1
Stripping length
18 mm
Tightening torque, max.
5 Nm
Tightening torque, min.
4 Nm
Type of connection
Screw connection, Busbar connection
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2.5 mm²
Wire connection cross-section, solid core, max.
16 mm²
Wire connection cross-section, solid core, min.
2.5 mm²
Installation advice
Busbar
Rail
TS 35
Standards
In accordance with IEC 60947-7-1
Rated cross-section
35 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
125 A
Current at maximum wires
140 A
Standards
In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-11
There are no products in this group.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
