Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Switched-mode power supply units
Electronic load monitoring
Communication modules
Uninterruptible power supply
DC/DC converter
Diode- and redundancy modules
Pre charge unit
Decentralised switched-mode power supply units IP65
Decentralised electronic load monitoring IP65
Accessories
Connect Power PROtop
Connect Power PROmax
Connect Power PROeco
Connect Power PRObas
Connect Power INSTA POWER
Connect Power PRO PM
Connect Power single-phase PROeco
Connect Power 3-phase PROeco
General ordering data
Version
Power supply, switch-mode power supply unit, 24 V
Order No.
1469530000
Type
PRO ECO3 120W 24V 5A
GTIN (EAN)
4050118275735
Qty.
1 pc(s).
Dimensions and weights
Depth
100 mm
Depth (inches)
3.937 inch
Height
125 mm
Height (inches)
4.921 inch
Width
40 mm
Width (inches)
1.575 inch
Net weight
677 g
Temperatures
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
6d8cdf22-8230-4af8-86c8-3558c716666d
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
Input
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system
Screw connection
Current consumption in relation to the input voltage
Voltage type
3-phase AC
Input voltage
400 V
Input current
0.4 A
Voltage type
3-phase AC
Input voltage
500 V
Input current
0.3 A
Voltage type
DC
Input voltage
800 V
Input current
0.2 A
Voltage type
DC
Input voltage
450 V
Input current
0.4 A
DC input voltage range
450...800 V DC
Frequency range AC
47...63 Hz
Input frequency
47...63 Hz
Input fuse (internal)
Yes
Inrush current
max. 40 A
Nominal power consumption
137.9 VA
Rated input voltage
3x 400...3x 500 V AC (wide-range input)
Recommended back-up fuse
2 A / DI, safety fuse 2...3 A, Char. C, circuit breaker
Surge protection
Varistor
Output
Capacitive load
unrestricted
Connection system
Screw connection
Continuous output current @ UNominal
5 A @ 55 °C, 3,75 A @ 70 °C
Nominal output current for Unom
5 A at 55 °C
Output power
120 W
Output voltage, max.
28 V
Output voltage, min.
22 V
Output voltage, note
(adjustable via potentiometer)
Overload protection
Yes
Parallel connection option
yes, max. 5
Protection against inverse voltage
Yes
Ramp-up time
≤ 100 ms
Rated output voltage
24 V DC ± 1 %
Residual ripple, breaking spikes
<50 mVPP @ 24 V DC, IN
General data
AC failure bridging time @ Inom
> 40 ms @ 3 x 500 V AC / > 20 ms @ 3 x 400 V AC
Degree of efficiency
87 %
Earth leakage current, max.
3.5 mA
Housing version
Metal, corrosion resistant
Indication
Green LED (Uoutput > 21.6 V DC), Yellow LED (loutput > 90 % IRated typ. ), red LED (overload, overtemperature, short-circuit, Uoutput <20.4 V DC)
MTBF
According to Standard
SN 29500
Operating time (hours), min.
2,500,000 h
Ambient temperature
25 °C
Input voltage
400 V
Output power
120 W
Duty cycle
100 %
According to Standard
SN 29500
Operating time (hours), min.
1,100,000 h
Ambient temperature
40 °C
Input voltage
400 V
Output power
120 W
Duty cycle
100 %
Max. perm. air humidity (operational)
5 %…95 % RH
Mounting position, installation notice
on terminal rail TS 35
Power factor (approx.)
> 0.55 @ 3 x 500 V AC / > 0.65 @ 3 x 400 V AC
Power loss, idling
6 W
Power loss, nominal load
17 W
Protection against over-heating
Yes
Protection against reverse voltages from the load
30…35 V DC
Protection degree
IP20
Short-circuit protection
Yes
Surge voltage category
II
EMC / shock / vibration
Interference immunity test acc. to
EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-8 (Fields), EN61000-4-11 (Dips)
Limiting of mains voltage harmonic currents
According to EN 61000-3-2
Noise emission in accordance with EN55032
Class B
Shock resistance IEC 60068-2-27
15 g In all directions
Vibration resistance IEC 60068-2-6
1 g according to EN 50178
Insulation coordination
Insulation voltage input / earth
2 kV
Insulation voltage output / earth
0.5 kV
Insulation voltage, input/output
3 kV
Pollution severity
2
Protection class
I, with PE connection
Surge voltage category
II
Electrical safety (applied standards)
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment
Acc. to EN50178 / VDE0160
Protection against dangerous shock currents
Acc. to VDE0106-101
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage
SELV acc. to IEC 60950-1, PELV according to EN 60204-1
Safety transformers for switch-mode power supplies
According to EN 61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Connection system
Screw connection
Number of terminals
4 for L1/L2/L3/PE
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.5 Nm
Wire connection cross section, flexible (input), max.
2.5 mm²
Connection data (output)
Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , max.
2.5 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Connection system
Screw connection
Number of terminals
6 (++,--,13,14)
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.5 Nm
Signalling
Contact load (NO contact)
max. 30 V DC / 1 A
Floating contact
Yes
Relay on/off
Output voltage >21.6 V DC/ <20.4 V DC, overload
Classifications
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.0
27-04-07-01
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-07-01
ECLASS 14.0
27-04-07-01
Order No.:
1469540000
Type:
PRO ECO3 240W 24V 10A
Version:
Power supply, switch-mode power supply unit, 24 V
Order No.:
1469550000
Type:
PRO ECO3 480W 24V 20A
Version:
Power supply, switch-mode power supply unit, 24 V
Order No.:
1469560000
Type:
PRO ECO3 960W 24V 40A
Version:
Power supply, switch-mode power supply unit, 24 V
Version
Power supply, switch-mode power supply unit, 24 V
Order No.
1469530000
Type
PRO ECO3 120W 24V 5A
GTIN (EAN)
4050118275735
Qty.
1 pc(s).
Depth
100 mm
Depth (inches)
3.937 inch
Height
125 mm
Height (inches)
4.921 inch
Width
40 mm
Width (inches)
1.575 inch
Net weight
677 g
Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C
REACH SVHC
Lead 7439-92-1
SCIP
6d8cdf22-8230-4af8-86c8-3558c716666d
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7a, 7cI
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system
Screw connection
Current consumption in relation to the input voltage
Voltage type
3-phase AC
Input voltage
400 V
Input current
0.4 A
Voltage type
3-phase AC
Input voltage
500 V
Input current
0.3 A
Voltage type
DC
Input voltage
800 V
Input current
0.2 A
Voltage type
DC
Input voltage
450 V
Input current
0.4 A
DC input voltage range
450...800 V DC
Frequency range AC
47...63 Hz
Input frequency
47...63 Hz
Input fuse (internal)
Yes
Inrush current
max. 40 A
Nominal power consumption
137.9 VA
Rated input voltage
3x 400...3x 500 V AC (wide-range input)
Recommended back-up fuse
2 A / DI, safety fuse 2...3 A, Char. C, circuit breaker
Surge protection
Varistor
Capacitive load
unrestricted
Connection system
Screw connection
Continuous output current @ UNominal
5 A @ 55 °C, 3,75 A @ 70 °C
Nominal output current for Unom
5 A at 55 °C
Output power
120 W
Output voltage, max.
28 V
Output voltage, min.
22 V
Output voltage, note
(adjustable via potentiometer)
Overload protection
Yes
Parallel connection option
yes, max. 5
Protection against inverse voltage
Yes
Ramp-up time
≤ 100 ms
Rated output voltage
24 V DC ± 1 %
Residual ripple, breaking spikes
<50 mVPP @ 24 V DC, IN
AC failure bridging time @ Inom
> 40 ms @ 3 x 500 V AC / > 20 ms @ 3 x 400 V AC
Degree of efficiency
87 %
Earth leakage current, max.
3.5 mA
Housing version
Metal, corrosion resistant
Indication
Green LED (Uoutput > 21.6 V DC), Yellow LED (loutput > 90 % IRated typ. ), red LED (overload, overtemperature, short-circuit, Uoutput <20.4 V DC)
MTBF
According to Standard
SN 29500
Operating time (hours), min.
2,500,000 h
Ambient temperature
25 °C
Input voltage
400 V
Output power
120 W
Duty cycle
100 %
According to Standard
SN 29500
Operating time (hours), min.
1,100,000 h
Ambient temperature
40 °C
Input voltage
400 V
Output power
120 W
Duty cycle
100 %
Max. perm. air humidity (operational)
5 %…95 % RH
Mounting position, installation notice
on terminal rail TS 35
Power factor (approx.)
> 0.55 @ 3 x 500 V AC / > 0.65 @ 3 x 400 V AC
Power loss, idling
6 W
Power loss, nominal load
17 W
Protection against over-heating
Yes
Protection against reverse voltages from the load
30…35 V DC
Protection degree
IP20
Short-circuit protection
Yes
Surge voltage category
II
Interference immunity test acc. to
EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-8 (Fields), EN61000-4-11 (Dips)
Limiting of mains voltage harmonic currents
According to EN 61000-3-2
Noise emission in accordance with EN55032
Class B
Shock resistance IEC 60068-2-27
15 g In all directions
Vibration resistance IEC 60068-2-6
1 g according to EN 50178
Insulation voltage input / earth
2 kV
Insulation voltage output / earth
0.5 kV
Insulation voltage, input/output
3 kV
Pollution severity
2
Protection class
I, with PE connection
Surge voltage category
II
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment
Acc. to EN50178 / VDE0160
Protection against dangerous shock currents
Acc. to VDE0106-101
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage
SELV acc. to IEC 60950-1, PELV according to EN 60204-1
Safety transformers for switch-mode power supplies
According to EN 61558-2-16
Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Connection system
Screw connection
Number of terminals
4 for L1/L2/L3/PE
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.5 Nm
Wire connection cross section, flexible (input), max.
2.5 mm²
Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , max.
2.5 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section, rigid , max.
6 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Connection system
Screw connection
Number of terminals
6 (++,--,13,14)
Tightening torque, max.
0.6 Nm
Tightening torque, min.
0.5 Nm
Contact load (NO contact)
max. 30 V DC / 1 A
Floating contact
Yes
Relay on/off
Output voltage >21.6 V DC/ <20.4 V DC, overload
ETIM 6.0
EC002540
ETIM 7.0
EC002540
ETIM 8.0
EC002540
ETIM 9.0
EC002540
ECLASS 9.0
27-04-07-01
ECLASS 9.1
27-04-07-01
ECLASS 10.0
27-04-07-01
ECLASS 11.0
27-04-07-01
ECLASS 12.0
27-04-07-01
ECLASS 13.0
27-04-07-01
ECLASS 14.0
27-04-07-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate no. (cULus)
E258476
Order No.:
1469540000
Type:
PRO ECO3 240W 24V 10A
Version:
Power supply, switch-mode power supply unit, 24 V
Order No.:
1469550000
Type:
PRO ECO3 480W 24V 20A
Version:
Power supply, switch-mode power supply unit, 24 V
Order No.:
1469560000
Type:
PRO ECO3 960W 24V 40A
Version:
Power supply, switch-mode power supply unit, 24 V
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.