Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
WF/WFF-Series
SRL-Series
High current / High voltage terminal blocks
1 Stud
2 Studs
16 mm²
35 mm²
50 mm²
120 mm²
General ordering data
Version
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
Order No.
1319050000
Type
WF 6/32
GTIN (EAN)
4050118317237
Qty.
25 pc(s).
Dimensions and weights
Depth
61 mm
Depth (inches)
2.402 inch
Height
67 mm
Height (inches)
2.638 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
28 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material data
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
System specifications
Version
Single-stud terminals
End cover plate required
No
Number of levels
1
Number of clamping points per level
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 32
Additional technical data
Explosion-tested version
No
Type of mounting
Snap-on
Conductors for clamping (rated connection)
2 x cable lugs DIN 46 234
2.5 to 35 mm²
2 x cable lugs DIN 46 235
6...25 mm²
Cable lug to DIN 46234
2.5...35 mm²
Cable lug to DIN 46235
6...25 mm²
Clamping range, max.
35 mm²
Clamping range, min.
2.5 mm²
Number of connections
1
Stud size for spade connection
M 6
Tightening torque, max.
6 Nm
Tightening torque, min.
3 Nm
Type of connection
Threaded stud connection
Rating data
Rated cross-section
35 mm²
Rated voltage
1,000 V
Rated DC voltage
1,000 V
Voltage with epoxy resin partition plate
2,300 V
Rated current
125 A
Current at maximum wires
125 A
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Impulse voltage with epoxy resin partition plate
12 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Approvals
Approvals
ROHS
Conform
Order No.:
1780850000
Type:
WF 6
Version:
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
Order No.:
1969000000
Type:
WF 6 NFF
Version:
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
Version
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
Order No.
1319050000
Type
WF 6/32
GTIN (EAN)
4050118317237
Qty.
25 pc(s).
Depth
61 mm
Depth (inches)
2.402 inch
Height
67 mm
Height (inches)
2.638 inch
Width
16 mm
Width (inches)
0.63 inch
Net weight
28 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material
Wemid
Colour
dark beige
UL 94 flammability rating
V-0
Version
Single-stud terminals
End cover plate required
No
Number of levels
1
Number of clamping points per level
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 32
Explosion-tested version
No
Type of mounting
Snap-on
2 x cable lugs DIN 46 234
2.5 to 35 mm²
2 x cable lugs DIN 46 235
6...25 mm²
Cable lug to DIN 46234
2.5...35 mm²
Cable lug to DIN 46235
6...25 mm²
Clamping range, max.
35 mm²
Clamping range, min.
2.5 mm²
Number of connections
1
Stud size for spade connection
M 6
Tightening torque, max.
6 Nm
Tightening torque, min.
3 Nm
Type of connection
Threaded stud connection
Rated cross-section
35 mm²
Rated voltage
1,000 V
Rated DC voltage
1,000 V
Voltage with epoxy resin partition plate
2,300 V
Rated current
125 A
Current at maximum wires
125 A
Volume resistance according to IEC 60947-7-x
0.26 mΩ
Rated impulse withstand voltage
8 kV
Impulse voltage with epoxy resin partition plate
12 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Approvals
ROHS
Conform
Order No.:
1780850000
Type:
WF 6
Version:
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
Order No.:
1969000000
Type:
WF 6 NFF
Version:
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.