Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
Universal range
Application range
TERMSERIES-compact
TERMSERIES
RIDERSERIES
D-SERIES
MCZ-SERIES
TERMOPTO
Products
RS
General ordering data
Version
RS-SERIES, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 5 V TTL, Continuous current: 5 A, Screw connection, Test button available: No
Order No.
1167760000
Type
RS 30 5VTTL BL/SL 1A
GTIN (EAN)
4008190164690
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2022-03-30
Dimensions and weights
Depth
56 mm
Depth (inches)
2.205 inch
Height
74 mm
Height (inches)
2.913 inch
Width
11.2 mm
Width (inches)
0.441 inch
Net weight
32.77 g
Temperatures
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
SCIP
3820ceea-2b49-4a61-bda5-08f3867b3419
Supply
Voltage supply
24 V DC (up to 25 mA)
Control side
Rated control voltage
5 V TTL
Rated current DC
2 mA
Power rating
0.45 W
Status indicator
No
Protective circuit
Free-wheeling diode, Reverse polarity protection
Load side
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
2000 VA
Switch-on delay
< 8 ms
Switch-off delay
≥ 7 ms
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 5x105 switching cycles
Mechanical service life
20 x 106 switching cycles
Min. switching power
250 mW
General data
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Insulation coordination
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Impulse withstand voltage
4 kV
Protection degree
IP20
Further details of approvals / standards
Connection data
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Classifications
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
Approvals
ROHS
Conform
Version
RS-SERIES, Relay module, Number of contacts: 1, NO contact AgNi 0.15 gold flashed, Rated control voltage: 5 V TTL, Continuous current: 5 A, Screw connection, Test button available: No
Order No.
1167760000
Type
RS 30 5VTTL BL/SL 1A
GTIN (EAN)
4008190164690
Qty.
10 pc(s).
Delivery status
Discontinued
Available until
2022-03-30
Depth
56 mm
Depth (inches)
2.205 inch
Height
74 mm
Height (inches)
2.913 inch
Width
11.2 mm
Width (inches)
0.441 inch
Net weight
32.77 g
Storage temperature
-40 °C...60 °C
Operating temperature
-25 °C...40
Humidity
40 °C / 93 % rel. humidity, no condensation
REACH SVHC
Lead 7439-92-1
SCIP
3820ceea-2b49-4a61-bda5-08f3867b3419
Voltage supply
24 V DC (up to 25 mA)
Rated control voltage
5 V TTL
Rated current DC
2 mA
Power rating
0.45 W
Status indicator
No
Protective circuit
Free-wheeling diode, Reverse polarity protection
Rated switching voltage
250 V AC
Max. switching frequency at rated load
0.1 Hz
Max. switching voltage, AC
250 V
Inrush current
8 A
AC switching capacity (resistive), max.
2000 VA
Switch-on delay
< 8 ms
Switch-off delay
≥ 7 ms
Contact type
1 NO contact (AgNi 0.15 gold flashed)
Electrical service life, DC coil
> 5x105 switching cycles
Mechanical service life
20 x 106 switching cycles
Min. switching power
250 mW
Version
soldered relay
Rail
TS 32, TS 35
Test button available
No
Mechanical switch position indicator
No
Colour
orange
Rated voltage
250 V
Pollution severity
2
Surge voltage category
III
Creepage and clearance distance input – output
> 3 mm
Impulse withstand voltage
4 kV
Protection degree
IP20
Wire connection method
Screw connection
Stripping length, rated connection
8 mm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
ETIM 6.0
EC001437
ETIM 7.0
EC001437
ETIM 8.0
EC001437
ETIM 9.0
EC001437
ECLASS 9.0
27-37-16-01
ECLASS 9.1
27-37-16-01
ECLASS 10.0
27-37-16-01
ECLASS 11.0
27-37-16-01
ECLASS 12.0
27-37-16-01
ECLASS 13.0
27-37-16-01
Approvals
ROHS
Conform
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.