Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Relay Modules & Solid-State Relays
Analogue Signal Conditioning
Power Supplies
Electronics Housings
Lightning and Surge Protection
Photovoltaics
e-mobility
Fieldbus Distributors
SPDs for energy systems
SPDs for instrumentation and control (I&C)
SPDs for data interfaces
Accessories
pluggable VSPC series
non-pluggable VSSC series in terminal design
non-pluggable MCZovp series with tension-clamp connection
Cable Gland VCG series
Protection for analogue signals (CL)
Protection for binary signals (SL)
VSSC Application
1-level protection with varistor (MOV)
1-level protection with gas discharge tubes (GDT)
1-level protection with suppressor circuit (RC combination with MOV)
1-level protection with suppressor diodes (TAZ)
Accessories (end plates)
VSSC4 surge protection terminal with RC suppressor circuit
General ordering data
Version
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) < 500 V
Order No.
1064130000
Type
VSSC4 RC 240VAC/DC
GTIN (EAN)
4032248829538
Qty.
5 pc(s).
Dimensions and weights
Depth
58.5 mm
Depth (inches)
2.303 inch
Height
76 mm
Height (inches)
2.992 inch
Width
12.4 mm
Width (inches)
0.488 inch
Net weight
35 g
Temperatures
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70 °C
Humidity
5...96 %
Probability of failure
SIL in compliance with IEC 61508
3
MTTF
4,048 a
SFF
97.16 %
λges
28.2
PFH in 1*10-9 per hour
80
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Rated data UL
Certificate No. (UL)
E311081
UL certificate
UL Zertifikat
CSA protection data
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input current, max. II
16 A
Input voltage, max. Ui
407 V
Internal capacity, max. CI
222 nF
Internal inductance, max. LI
0 µH
General data
Colour
black
Design
Terminal
Isolating function
No
Optical function display
No
Protection degree
IP20
Segment
Measurement - Monitoring - Setting
UL 94 flammability rating
V-0
Version
Surge protection for measurement and control
Insulation coordination acc. to EN 50178
Pollution severity
2
Surge voltage category
III
Rated data IEC / EN
Capacitance
220 nF
Discharge current In (8/20µs) wire-PE
1.2 kA
Discharge current, max. (8/20 µs)
2.5 kA
Max. continuous voltage, Uc (AC)
275 V
Max. continuous voltage, Uc (DC)
388 V
Number of poles
1
Overload - failure mode
Mode 1
Protection level UP (typ.)
< 500 V
Rated current IN
20 A
Rated voltage (AC)
240 V
Rated voltage (DC)
339 V
Requirements category acc. to IEC 61643-21
C1
Standards
IEC 61643-21
Surge current-carrying capacity C1
0.25 kA 8/20 µs 0.5 kV 1.2/50 µs
Voltage type
AC/DC
Volume resistance
<0.1 Ω
Connection data
Stripping length
10 mm
Type of connection
Screw connection
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.8 Nm
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection cross-section, stranded, max.
4 mm²
Important note
Product information
Mode 1: State where the voltage-limiting part of the SPD was disconnected. The voltage limiting function is no longer available, but the cable is still functional.
Classifications
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Tender specification sheets
Long specification
Feed-through terminal, 12.4mm wide with a sparkover gap and interference suppressor combination between the signal line connection, TS 35 mounting foot. A signal with max. 20A can be protected here. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked.
Short specification
Feed-through terminal with a sparkover gap and interference suppressor combination between the signal line connection, TS 35 mounting foot. Version: 240 V UC
Order No.:
1064120000
Type of connection:
Screw connection
Type:
VSSC4 RC 24VAC/DC
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) 150 V
Version
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) < 500 V
Order No.
1064130000
Type
VSSC4 RC 240VAC/DC
GTIN (EAN)
4032248829538
Qty.
5 pc(s).
Depth
58.5 mm
Depth (inches)
2.303 inch
Height
76 mm
Height (inches)
2.992 inch
Width
12.4 mm
Width (inches)
0.488 inch
Net weight
35 g
Storage temperature
-40 °C...80 °C
Operating temperature
-40 °C...70 °C
Humidity
5...96 %
SIL in compliance with IEC 61508
3
MTTF
4,048 a
SFF
97.16 %
λges
28.2
PFH in 1*10-9 per hour
80
REACH SVHC
/
RoHS Compliance Status
Compliant with exemption
RoHS Exemption (if applicable/known)
7cI
Gas group C
IIB
Gas group D
IIA
Gas groups A, B
IIC
Input current, max. II
16 A
Input voltage, max. Ui
407 V
Internal capacity, max. CI
222 nF
Internal inductance, max. LI
0 µH
Colour
black
Design
Terminal
Isolating function
No
Optical function display
No
Protection degree
IP20
Segment
Measurement - Monitoring - Setting
UL 94 flammability rating
V-0
Version
Surge protection for measurement and control
Pollution severity
2
Surge voltage category
III
Capacitance
220 nF
Discharge current In (8/20µs) wire-PE
1.2 kA
Discharge current, max. (8/20 µs)
2.5 kA
Max. continuous voltage, Uc (AC)
275 V
Max. continuous voltage, Uc (DC)
388 V
Number of poles
1
Overload - failure mode
Mode 1
Protection level UP (typ.)
< 500 V
Rated current IN
20 A
Rated voltage (AC)
240 V
Rated voltage (DC)
339 V
Requirements category acc. to IEC 61643-21
C1
Standards
IEC 61643-21
Surge current-carrying capacity C1
0.25 kA 8/20 µs 0.5 kV 1.2/50 µs
Voltage type
AC/DC
Volume resistance
<0.1 Ω
Stripping length
10 mm
Type of connection
Screw connection
Tightening torque, min.
0.5 Nm
Tightening torque, max.
0.8 Nm
Clamping range, min.
0.5 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max.
6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Connection cross-section, stranded, min.
0.5 mm²
Connection cross-section, stranded, max.
4 mm²
Product information
Mode 1: State where the voltage-limiting part of the SPD was disconnected. The voltage limiting function is no longer available, but the cable is still functional.
ETIM 6.0
EC000943
ETIM 7.0
EC000943
ETIM 8.0
EC000943
ETIM 9.0
EC000943
ECLASS 9.0
27-13-08-07
ECLASS 9.1
27-13-08-07
ECLASS 10.0
27-13-08-07
ECLASS 11.0
27-13-08-07
ECLASS 12.0
27-17-90-90
ECLASS 13.0
27-17-90-90
ECLASS 14.0
27-17-90-90
Long specification
Feed-through terminal, 12.4mm wide with a sparkover gap and interference suppressor combination between the signal line connection, TS 35 mounting foot. A signal with max. 20A can be protected here. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked.
Short specification
Feed-through terminal with a sparkover gap and interference suppressor combination between the signal line connection, TS 35 mounting foot. Version: 240 V UC
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UL)
E311081
Order No.:
1064120000
Type of connection:
Screw connection
Type:
VSSC4 RC 24VAC/DC
Version:
Surge protection for instrumentation and control, Surge protection for measurement and control, UP (L/N-PE) 150 V
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.