Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
PLC Interfaces and Migration Solutions
Cord sets, Patchcords and Cables
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2-tier
4 mm²
General ordering data
Version
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, Integral test socket: No, TS 35, beige
Order No.
0687460000
Type
DKT 4/35
GTIN (EAN)
4008190148690
Qty.
50 pc(s).
Alternative product
1247290000
Dimensions and weights
Depth
56.5 mm
Depth (inches)
2.224 inch
Height
65 mm
Height (inches)
2.559 inch
Height of lowest version
56.5 mm
Width
6 mm
Width (inches)
0.236 inch
Net weight
16.13 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Material data
Material
PA 66
Insulating material
PA 66
Colour
beige
UL 94 flammability rating
V-2
System specifications
End cover plate required
Yes
Number of levels
2
Number of clamping points per level
2
Levels cross-connected internally
No
Rail
TS 35
Additional technical data
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
12400-281
Current size C (CSA)
25 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.
0.5 mm²
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
4
Stripping length
9 mm
Tightening torque, max.
1 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
2
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.2 mm²
Disconnect terminals
Cross-disconnect
without
Integral test socket
No
Slitting
Pivoting
General
Installation advice
Direct mounting
Operating temperature range, max.
100 °C
Operating temperature range, min.
-50 °C
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rating data
Rated cross-section
4 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 60947-7-1
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
300 V
Classifications
ETIM 6.0
EC000902
ETIM 7.0
EC000902
ETIM 8.0
EC000902
ETIM 9.0
EC000902
ECLASS 9.0
27-14-11-26
ECLASS 9.1
27-14-11-26
ECLASS 10.0
27-14-11-26
ECLASS 11.0
27-14-11-26
ECLASS 12.0
27-14-11-26
ECLASS 13.0
27-25-01-09
Order No.:
0327960000
Type:
DKT 4/35 2STB
Version:
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, Integral test socket: Yes, TS 35, beige / yellow
Order No.:
1304960000
Type:
DKT 4V/35 2STB
Version:
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, TS 35, beige / yellow
Version
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, Integral test socket: No, TS 35, beige
Order No.
0687460000
Type
DKT 4/35
GTIN (EAN)
4008190148690
Qty.
50 pc(s).
Alternative product
1247290000
Depth
56.5 mm
Depth (inches)
2.224 inch
Height
65 mm
Height (inches)
2.559 inch
Height of lowest version
56.5 mm
Width
6 mm
Width (inches)
0.236 inch
Net weight
16.13 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Material
PA 66
Insulating material
PA 66
Colour
beige
UL 94 flammability rating
V-2
End cover plate required
Yes
Number of levels
2
Number of clamping points per level
2
Levels cross-connected internally
No
Rail
TS 35
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
12400-281
Current size C (CSA)
25 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
2.5 mm²
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.
0.5 mm²
Connection type, additional connection
Screw connection
Blade size
0.6 x 3.5 mm
Clamping range, max.
4 mm²
Clamping range, min.
0.13 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
4 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A3
Number of connections
4
Stripping length
9 mm
Tightening torque, max.
1 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
2
Twin wire-end ferrules, max.
1.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Type of connection 2
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
4 mm²
Wire connection cross-section, solid core, min.
0.2 mm²
Cross-disconnect
without
Integral test socket
No
Slitting
Pivoting
Installation advice
Direct mounting
Operating temperature range, max.
100 °C
Operating temperature range, min.
-50 °C
Rail
TS 35
Standards
IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 26
Rated cross-section
4 mm²
Rated voltage
400 V
Rated DC voltage
400 V
Rated current
10 A
Current at maximum wires
10 A
Standards
IEC 60947-7-1
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
10 A
Voltage size C (UR)
300 V
ETIM 6.0
EC000902
ETIM 7.0
EC000902
ETIM 8.0
EC000902
ETIM 9.0
EC000902
ECLASS 9.0
27-14-11-26
ECLASS 9.1
27-14-11-26
ECLASS 10.0
27-14-11-26
ECLASS 11.0
27-14-11-26
ECLASS 12.0
27-14-11-26
ECLASS 13.0
27-25-01-09
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
0327960000
Type:
DKT 4/35 2STB
Version:
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, Integral test socket: Yes, TS 35, beige / yellow
Order No.:
1304960000
Type:
DKT 4V/35 2STB
Version:
Test-disconnect terminal, Screw connection, 4 mm², 400 V, 10 A, Pivoting, Cross-disconnect: without, TS 35, beige / yellow
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.