Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2.5 mm²
4 mm²
50 mm²
70 mm²
95 mm²
150 mm²
240 mm²
General ordering data
Version
Feed-through terminal block, Screw connection, beige / yellow, 4 mm², 20 A, 500 V, Number of connections: 1, Number of levels: 1, TS 35, V-2, PA 66, 100 °C
Order No.
0664960000
Type
AST 5/35 SF 6.3/2.8
GTIN (EAN)
4008190043322
Qty.
50 pc(s).
Dimensions and weights
Depth
46 mm
Depth (inches)
1.811 inch
Height
58 mm
Height (inches)
2.283 inch
Width
6.5 mm
Width (inches)
0.256 inch
Net weight
12.62 g
Temperatures
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Environmental Product Compliance
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material data
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
System specifications
Version
Screw connection, With cable lug connection F2.8, With cable lug connection F6.3, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
4
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Additional technical data
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
CSA rating data
Certificate No. (CSA)
12400-145
Current size C (CSA)
16 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
24 AWG
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
4 mm²
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.2 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A4
Number of connections
1
Stripping length
12 mm
Tightening torque, max.
1 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
2
Twin wire-end ferrules, max.
2.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 24
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Installation advice
Busbar
Rail
TS 35
Standards
IEC 61210, In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 24
Other connections
Cable-lug connection
Slotted
Rated cross-section spade connector 2.8 mm
1 mm²
Rated cross-section spade connector 6.3 mm
2.5 mm²
Rating data
Rated cross-section
4 mm²
Rated voltage
500 V
Rated DC voltage
500 V
Rated current
20 A
Current at maximum wires
20 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
20 A
Voltage size C (UR)
300 V
Classifications
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Order No.:
0630400000
Type:
SAK 4 SS/35 6.3/2.8 DB
Version:
Feed-through terminal block, Flat-blade connection, dark beige, 2.5 mm², 20 A, 500 V, Number of connections: 4, Number of levels: 2, TS 35, V-2, PA 66, 100 °C
Version
Feed-through terminal block, Screw connection, beige / yellow, 4 mm², 20 A, 500 V, Number of connections: 1, Number of levels: 1, TS 35, V-2, PA 66, 100 °C
Order No.
0664960000
Type
AST 5/35 SF 6.3/2.8
GTIN (EAN)
4008190043322
Qty.
50 pc(s).
Depth
46 mm
Depth (inches)
1.811 inch
Height
58 mm
Height (inches)
2.283 inch
Width
6.5 mm
Width (inches)
0.256 inch
Net weight
12.62 g
Storage temperature
-25 °C...55 °C
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
REACH SVHC
/
RoHS Compliance Status
Compliant without exemption
Material
PA 66
Colour
beige / yellow
UL 94 flammability rating
V-2
Version
Screw connection, With cable lug connection F2.8, With cable lug connection F6.3, for screwable cross-connection, One end without connector
End cover plate required
Yes
Number of potentials
1
Number of levels
1
Number of clamping points per level
4
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
No
Rail
TS 35
N-function
No
PE function
No
PEN function
No
Explosion-tested version
No
Installation advice
Busbar
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Certificate No. (CSA)
12400-145
Current size C (CSA)
16 A
Voltage size C (CSA)
300 V
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
24 AWG
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
4 mm²
Connection type, additional connection
Screw connection
Blade size
0.6 x 3.5 mm
Clamping range, max.
6 mm²
Clamping range, min.
0.2 mm²
Clamping screw
M 3
Connection cross-section, stranded, max.
2.5 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
A4
Number of connections
1
Stripping length
12 mm
Tightening torque, max.
1 Nm
Tightening torque, min.
0.5 Nm
Torque level with DMS electric screwdriver
2
Twin wire-end ferrules, max.
2.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 24
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.5 mm²
Wire connection cross-section, solid core, max.
6 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Installation advice
Busbar
Rail
TS 35
Standards
IEC 61210, In accordance with IEC 60947-7-1
Wire connection cross section AWG, max.
AWG 12
Wire connection cross section AWG, min.
AWG 24
Cable-lug connection
Slotted
Rated cross-section spade connector 2.8 mm
1 mm²
Rated cross-section spade connector 6.3 mm
2.5 mm²
Rated cross-section
4 mm²
Rated voltage
500 V
Rated DC voltage
500 V
Rated current
20 A
Current at maximum wires
20 A
Standards
IEC 61210, In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x
1 mΩ
Rated impulse withstand voltage
6 kV
Power loss in accordance with IEC 60947-7-x
1.02 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
12 AWG
Conductor size Factory wiring min. (UR)
26 AWG
Conductor size Field wiring max. (UR)
12 AWG
Conductor size Field wiring min. (UR)
22 AWG
Current size C (UR)
20 A
Voltage size C (UR)
300 V
ETIM 6.0
EC000897
ETIM 7.0
EC000897
ETIM 8.0
EC000897
ETIM 9.0
EC000897
ECLASS 9.0
27-14-11-20
ECLASS 9.1
27-14-11-20
ECLASS 10.0
27-14-11-20
ECLASS 11.0
27-14-11-20
ECLASS 12.0
27-14-11-20
ECLASS 13.0
27-25-01-01
ECLASS 14.0
27-25-01-01
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Order No.:
0630400000
Type:
SAK 4 SS/35 6.3/2.8 DB
Version:
Feed-through terminal block, Flat-blade connection, dark beige, 2.5 mm², 20 A, 500 V, Number of connections: 4, Number of levels: 2, TS 35, V-2, PA 66, 100 °C
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.