Upínací třmen (přípojnice), Upínací třmen, Stříbrná, Šířka: 6 mm, M 3, Ocel
Číslo objednávky
0565480000
Typ
ZB 4/6K BL
GTIN (EAN)
4008190086831
Množství
50 ks
Rozměry a hmotnosti
Hloubka
14,7 mm
Hloubka (v palcích)
0,579 inch
Výška
25 mm
Výška (v palcích)
0,984 inch
Šířka
6 mm
Šířka (v palcích)
0,236 inch
Čistá hmotnost
3,68 g
Teploty
Rozsah provozní teploty
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Shoda produktu s prostředím
Stav souladu se směrnicí RoHS
V souladu bez výjimky
REACH SVHC
No SVHC above 0.1 wt%
Specifikace systému
Verze
pro přípojnici 6 x 6 mm
Údaje hodnocení IECEx/ATEX
Č. osvědčení (ATEX)
DEMKO03ATEX136028U
Č. osvědčení (IECEX)
IECEXULD13.0005U
Průřez vodiče max. (ATEX)
4 mm²
Průřez vodiče max. (IECEX)
4 mm²
Rozsah provozní teploty
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Značení EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU značka
II 2 G D
Bezpečnostní upozornění
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Značení EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU značka
II 2 G D
Bezpečnostní upozornění
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.