Clamping yoke (bus-bar), Clamping yoke, silver, 4 mm², Width: 5.3 mm, M 3, Steel
Order No.
0556700000
Type
ZB 4/6
GTIN (EAN)
4008190188412
Qty.
50 pc(s).
Dimensions and weights
Depth
20 mm
Depth (inches)
0.787 inch
Height
12 mm
Height (inches)
0.472 inch
Width
5.3 mm
Width (inches)
0.209 inch
Net weight
2.88 g
Temperatures
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
Steel
Colour
silver
Rating data IECEx/ATEX
Certificate No. (ATEX)
DEMKO03ATEX136028U
Certificate No. (IECEX)
IECEXULD13.0005U
Wire cross section max. (ATEX)
4 mm²
Wire cross section max. (IECEX)
4 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Safety notice
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Safety notice
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
, Clamping yoke, silver, 4 mm², Width: 5.3 mm, M 3, Steel',1,'50.0',1,'05567000009999.jpg',false,0);)
, Clamping yoke, silver, 10 mm², Width: 8 mm, M 4, Steel',1,'50.0',1,'12613000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 16 mm², Width: 10 mm, M 4, Steel',1,'50.0',1,'03166000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 16 mm², Width: 10 mm, M 4, Steel',1,'50.0',1,'05568000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 35 mm², Width: 14 mm, M 6, Steel',1,'20.0',1,'02665000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, 4 mm², Width: 5.3 mm, M 3, Steel',1,'50.0',1,'03165000009999.jpg',false,0);){kind=link}
, Clamping yoke, silver, Width: 8 mm, M 4, Steel',1,'50.0',1,'04595000009999.jpg',false,0);){kind=link}