Connectivity
Electronics
Automation & Software
Workplace & Accessories
Assembly
Terminal Blocks
Connectors
PCB Terminals and Connectors
Enclosure Systems and Components
Contactless Connectivity
Cable Entry Systems and Components
Cord sets, Patchcords and Cables
PLC Interfaces and Migration Solutions
Service Interfaces
Distribution Boxes
Universal range
Application range
Terminal blocks for the direct lettering
Accessories
SNAP IN technology
PUSH IN technology
Tension clamp technology
Clamping yoke technology
Stud technology
W-Series
SAK-Series
TS 35
TS 32
TS 32 / TS 35 EN combination foot:
TS 15
Multi-pole terminal strips
Direct Mounting
Feed-through terminal blocks
Fuse terminal blocks
Modular PE terminal blocks
Modular terminal blocks with electronic components
Modular test-disconnect terminal blocks
Thermocouple terminal blocks
terminal blocks with miscellaneous connection
terminal blocks with spring-loaded cable clamp
1-tier
2.5 mm²
4 mm²
10 mm²
16 mm²
35 mm²
General ordering data
Version
PE terminal, Screw connection, yellow, green, 10 mm², 800 V, Number of connections: 2, Number of levels: 1, TS 32, V-2, PA 66
Order No.
0354660000
Type
EK 10
GTIN (EAN)
4008190069827
Qty.
50 pc(s).
Dimensions and weights
Depth
51.5 mm
Depth (inches)
2.028 inch
Height
40 mm
Height (inches)
1.575 inch
Width
10 mm
Width (inches)
0.394 inch
Net weight
28.45 g
Temperatures
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
Environmental Product Compliance
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material data
Material
PA 66
Colour
yellow, green
UL 94 flammability rating
V-2
Rating data IECEx/ATEX
Certificate No. (ATEX)
TUEV18ATEX8207U
Certificate No. (IECEX)
IECEXTUR18.0017U
Wire cross section max. (ATEX)
50 mm²
Wire cross section max. (IECEX)
50 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
System specifications
Version
Screw connection, With PE connection, One end without connector
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 32
N-function
No
PE function
Yes
PEN function
No
Additional technical data
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
closed
Type of mounting
when screwed in
CSA rating data
Certificate No. (CSA)
200039-2124451
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
14 AWG
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
10 mm²
Connection type, additional connection
Screw connection
Conductors for clamping (rated connection)
Blade size
1.0 x 5.5 mm
Clamping range, max.
10 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 4
Connection cross-section, stranded, max.
6 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
12 mm
Tightening torque, max.
1.2 Nm
Tightening torque, min.
1.2 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
10 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
10 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
General
Rail
TS 32
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
PE rating data
Rated short-time current
720 A (6 mm²)
Centre screw on PE terminals
M 3
Tightening torque range for fixing screw
0.5...1.0 Nm
PEN function
No
Rating data
Rated cross-section
10 mm²
Rated voltage to adjoining terminal
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
1.82 W
Pollution severity
3
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
14 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
14 AWG
Classifications
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Order No.:
0323100000
Type:
EK 2
Version:
PE terminal, Screw connection, silver, 10 mm², Number of connections: 2, Number of levels: 1, TS 32, None, PA 66
Version
PE terminal, Screw connection, yellow, green, 10 mm², 800 V, Number of connections: 2, Number of levels: 1, TS 32, V-2, PA 66
Order No.
0354660000
Type
EK 10
GTIN (EAN)
4008190069827
Qty.
50 pc(s).
Depth
51.5 mm
Depth (inches)
2.028 inch
Height
40 mm
Height (inches)
1.575 inch
Width
10 mm
Width (inches)
0.394 inch
Net weight
28.45 g
Storage temperature
-25 °C...55 °C
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
100 °C
RoHS Compliance Status
Compliant without exemption
REACH SVHC
No SVHC above 0.1 wt%
Material
PA 66
Colour
yellow, green
UL 94 flammability rating
V-2
Certificate No. (ATEX)
TUEV18ATEX8207U
Certificate No. (IECEX)
IECEXTUR18.0017U
Wire cross section max. (ATEX)
50 mm²
Wire cross section max. (IECEX)
50 mm²
Operating temperature range
For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
Marking EN 60079-7
Ex eb II C Gb
Ex 2014/34/EU label
II 2 G D
Version
Screw connection, With PE connection, One end without connector
End cover plate required
No
Number of potentials
1
Number of levels
1
Number of clamping points per level
2
Number of potentials per tier
1
Levels cross-connected internally
No
PE connection
Yes
Rail
TS 32
N-function
No
PE function
Yes
PEN function
No
Explosion-tested version
Yes
Number of similar terminals
1
Open sides
closed
Type of mounting
when screwed in
Certificate No. (CSA)
200039-2124451
Wire cross section max. (CSA)
8 AWG
Wire cross section min. (CSA)
14 AWG
Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.
10 mm²
Connection type, additional connection
Screw connection
Blade size
1.0 x 5.5 mm
Clamping range, max.
10 mm²
Clamping range, min.
0.5 mm²
Clamping screw
M 4
Connection cross-section, stranded, max.
6 mm²
Connection cross-section, stranded, min.
1.5 mm²
Connection direction
on side
Gauge to IEC 60947-1
B6
Number of connections
2
Stripping length
12 mm
Tightening torque, max.
1.2 Nm
Tightening torque, min.
1.2 Nm
Type of connection
Screw connection
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Wire connection cross section, finely stranded, max.
10 mm²
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.
10 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
0.5 mm²
Wire connection cross-section, solid core, max.
10 mm²
Wire connection cross-section, solid core, min.
0.5 mm²
Rail
TS 32
Standards
IEC 60947-7-2
Wire connection cross section AWG, max.
AWG 8
Wire connection cross section AWG, min.
AWG 20
Rated short-time current
720 A (6 mm²)
Centre screw on PE terminals
M 3
Tightening torque range for fixing screw
0.5...1.0 Nm
PEN function
No
Rated cross-section
10 mm²
Rated voltage to adjoining terminal
800 V
Standards
IEC 60947-7-2
Volume resistance according to IEC 60947-7-x
0.56 mΩ
Rated impulse withstand voltage to adjacent terminal
8 kV
Power loss in accordance with IEC 60947-7-x
1.82 W
Pollution severity
3
Certificate No. (UR)
E60693
Conductor size Factory wiring max. (UR)
8 AWG
Conductor size Factory wiring min. (UR)
14 AWG
Conductor size Field wiring max. (UR)
8 AWG
Conductor size Field wiring min. (UR)
14 AWG
ETIM 6.0
EC000901
ETIM 7.0
EC000901
ETIM 8.0
EC000901
ETIM 9.0
EC000901
ECLASS 9.0
27-14-11-41
ECLASS 9.1
27-14-11-41
ECLASS 10.0
27-14-11-41
ECLASS 11.0
27-14-11-41
ECLASS 12.0
27-14-11-41
ECLASS 13.0
27-25-01-03
ECLASS 14.0
27-25-01-03
Approvals
ROHS
Conform
UL File Number Search
UL Website
Certificate No. (UR)
E60693
Certificate No. (cURusEX)
E184763
Order No.:
0323100000
Type:
EK 2
Version:
PE terminal, Screw connection, silver, 10 mm², Number of connections: 2, Number of levels: 1, TS 32, None, PA 66
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.
;)
;){kind=link}