Staffa di serraggio (Barra collettrice), Staffa di serraggio, argento, 16 mm², Larghezza: 10 mm, M 4, acciaio
N. d’ordine
0316600000
Tipo
ZB 16 ZKSC
GTIN (EAN)
4008190145989
CPZ
50 Pezzo
Dimensioni e pesi
Profondità
24 mm
Profondità (pollici)
0,945 inch
Posizione verticale
16 mm
Altezza (pollici)
0,63 inch
Larghezza
10 mm
Larghezza (pollici)
0,394 inch
Peso netto
7,52 g
Conformità ambientale del prodotto
REACH SVHC
/
Stato conformità RoHS
Conforme senza esenzione
Dati di dimensionamento IECEx/ATEX
N° certificato (IECEX)
IECEXULD13.0005U
Sezione cavo max (IECEX)
16 mm²
Norma di sicurezza
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
Aaltri dati tecnici
Istruzioni di montaggio
passante
Tipo di montaggio
se avvitato
Dati caratteristici del sistema
Versione
per barra collettrice 10 x 3 mm
Dati dei materiali
Materiale
acciaio
Colori
argento
Dati dimensionamento
Sezione di dimensionamento
16 mm²
Dati dimensionamento secondo CSA
N° certificato (CSA)
12400-237
Sezione cavo max (CSA)
6 AWG
Sezione cavo min (CSA)
12 AWG
Dimensioni
Sfalsamento TS 35
39 mm
Generale
Istruzioni di montaggio
passante
Conduttori allacciabili (collegamento di dimensionamento)
Installation instructions: The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
Regarding accessory use, the manufacturer's instructions must be followed.
List of restrictions: The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.
This function is provided via the external service provider https://supplyframe.com. By clicking on "Continue" you will be redirected to this page. This leads to a data transfer of personal data to non-European countries. Please check the data protection policy of the external website, for which Weidmüller assumes no responsibility and liability.